Question about 2001 Hyundai XG300

1 Answer

XG300 Heater motor removal

I have a shop manual that shows the heater motor but it doesn't show where it is or how to remove and replace. I think it's under the glove box. Thats where you have to hit it to make it run when it's cold.Are there any r&r diagrams?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Your correct it's behind the glove box, but its on the bottom of the housing for the heater core. First you'll need to remove the dash pad, most likely the glove box and surround to get to all the screws. be extra careful when removing air bag connectors as a strong static shock can damage/initiate them. Then you'll see it it's on the underside of the big black plastic heater system. I found a diagram for you, here

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replacing heater core in 2006 sazuki forenza



Heater Core Removal and Installation

Removal
1. Disconnect the negative battery cable.
2. Remove the instrument panel.
3. Recover the refrigerant.
4. Remove the heater/air distributor case assembly.
5. Remove the wiring harness and electrical connectors from the heater/air distributor case assembly.


6. Remove the screws that connect the heater core housing and the evaporator housing.


7. Separate the sponge from heater/air distributor case assembly.
8. Remove the heater core cover screws from the heater core housing.


9. Remove the heater core.

Installation
1. Install the heater core into the case.
2. Install the screws on the heater core housing.

Tighten: Tighten the heater core cover screws to 1.2 Nm (11 in. lbs.).

Jan 10, 2017 | 2006 Suzuki Forenza

1 Answer

How to change a heater core on 2008 Chevrolet Impala


This is a BIG job involving discharging the a/c system and removing the entire dash assembly. If you think you want to do this, I strongly recommend purchasing a service manual from the manufacturer, or at least a Haynes/Chilton manual from your local auto parts store for guidance. I'll attach a link to a YouTube video showing the process for a similar car (Buick Lucerne). The exact steps won't be the same, but you'll get an idea of what you're in for.
Heater core replacement 2006 2011 Buick Lucerne

Dec 29, 2016 | 2008 Chevrolet Impala

2 Answers

Where is the heater fan located in a 2000 chevy impala?


Here's a great video too that will show you where it's located and how to replace it.">

Feb 14, 2011 | 2000 Chevrolet Impala

1 Answer

I HAVE A 98 LINC TOWNCAR AND THE HEATER CORE NEEDS TO BE REPLACED.. FORD IS GOING TO CHARGE ME $1200 ... A LOCAL REPAIR SHOP WILL CHARGE $600 .. I HAVE ABOUT $120 TO MY NAME.. CAN SOMEONE HELP ME SO THAT...


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 22, 2010 | 1998 Lincoln Town Car

2 Answers

Heater core no good neede intrutions on how to replace it? Need a web site that could show me how?


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Nov 18, 2010 | 2002 Jeep Liberty

2 Answers

90 buick park ave heater blower motor runs on high all the time even with key off . The heater controls don't have any effect on operation.


The switch , relay, or motor are shorted out .
First locate relay and remove it to turn the blower off.
If you want to do the diagnosis yourself ...remove the switch first and see if the motor stops. if it does you've found the culprit. If not move onto relay if the relay removal kills the motor thats good news. if it doesn't then this thing gets B+ right from the battery at HIGH SPEED. Your gonna need Shop Manual
to show you where this thing connects to the battery.
So either the switch, relay, motor , or resistors ( in your case where battery connects to the motor are your problems.
Unlessyour really good with electrical items pull the relay and bring it to a repair shop.

Mar 31, 2010 | 1991 Buick Park Avenue

1 Answer

Fuse diagram for a 98' E-150 van specifically for heater fan


owner manual will tell you fuse layout. If you have only high speed, you have a bad resister. 4 wires.

Resistor —Heater Blower Motor Switch Removal
  1. Remove the battery (10655) ; refer to Section 414-01 .
  1. Remove the battery tray.
    1. Remove the screws.
    1. Remove the battery tray.
  1. Disconnect the heater blower motor switch resistor connector.
  1. Remove the heater blower motor switch resistor (18591).
    1. Remove the two screws.
    1. Remove the heater blower motor switch resistor.
---------------------------------

0f120f5.gif

Feb 26, 2010 | 1998 Ford Econoline

1 Answer

2000 Cadillac Escalade. Replace Heater Core


Here you go, Good Luck !! Click on link & scroll down a ways. Any picture will expand if you click on them.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800a5da0

Jan 28, 2009 | 2000 Cadillac Escalade

Not finding what you are looking for?
2001 Hyundai XG300 Logo

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

71288 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7009 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...