Question about 2005 Hyundai Accent

1 Answer

Tow bar wiring

I have fitted a tow bar to my 2005 Hyundai Accent. Could someone please tell me how to get the wire into the car and the correct way to connect it. It is a single socket trailer connector. Thank you.

Posted by on

  • 3 more comments 
  • hyunbri Feb 04, 2009

    I do not need a kit, I have everything needed. I am asking the best way to get the wires inside the car, do I have to drill a hole, if so where is the best place to drill it.

  • hyunbri Feb 08, 2009

    I need to get the wires INSIDE the tow car and connect to the cars wiring system so that when I tow a trailer the lights on the trailer work.

  • hyunbri Feb 08, 2009

    Your answer is on par with the others. I think Ill just sell the trailer.

  • hyunbri Feb 13, 2009

    I am still hoping that someone knows the answer!!!!!!!!!!!!!!!!!!!

  • hyunbri Mar 04, 2009

    I have now found how to do all that I wanted to do, end of story.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

Go to U-haul, and they have a kit to make it easy to fix your problem.

Posted on Jan 31, 2009

  • spankie09 Feb 04, 2009

    You can run it under the car. just make sure that you use tie wraps to secure the wires under the car amd make a tie in point in front of the car fro attaching it to the tow car.

  • spankie09 Feb 08, 2009

    You will have to have a snake chaser. It is a stiff wire the you will have to run from the back seat toward to trunk. You will have to tie the wire on the the snake and pull then under the seat from the trunk. The take the door jam/ thresh hole molding from the top of the carpet.Run the wires under the edge of the carpet to under the dash. Then there will be a rubber grummit on the firewall, under the hood. Get a sharp object like a icepick to put a hole in the rubber grummit to run the wires thru. Once you have all the wire under the hood. secure them to the fender wall toward the front of the car. Make all of your tie-in, and put everything back together. Make sure to get a can of liquid tape to seal all the connection, so they will not see moisture. Is that what you looking for??????

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getz 2005 cuts out when driving slowly


What are the fault codes. Have your fuel pressures checked (3.5 bar). Check if any wires are fouling up near the fire wall on engine harness

Mar 24, 2014 | 2005 Hyundai Accent

1 Answer

I want to remove a tow bar & wiring to fit it to another Hyundai,can i cut the wires coming from the rear light going to the tow bar connection or do i have to disconnect them


you can cut them if you want just tape up the ends, but i think you should fallow them to there source some were there is a wiring splitter that you will need to hook them up on the next car. it is a small box with 5 or 6 wires going in and 4 coming out.

Feb 24, 2011 | Hyundai Accent Cars & Trucks

1 Answer

Where are the spark plugs at in my '07 Hyundai Accent 4 door sedan, and what is the "gap" for the plugs?


Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Sep 24, 2009 | 2007 Hyundai Accent GS Hatchback

1 Answer

2002 Hyundai Accent 1.6 Check engine code


Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Aug 27, 2009 | Hyundai Accent Cars & Trucks

2 Answers

Windshield Washer Pump does not operate on 02 Accent


Your Accent has rear wiper/washer.. correct? That's where the 3rd wire comes in. They sold you/you bought the wrong pump. Here's the wiring diagrams:
bf35ab5.jpg
e609b85.jpg

Jun 01, 2009 | 2002 Hyundai Accent

1 Answer

Changing transmission


I was told by a wrecking yard mechanic that only Hyundai Accent 2000-2005 Automatic Transmissions are compatible, (interchangeable with one another).

Mar 25, 2009 | 2000 Hyundai Accent

1 Answer

Electrical


somebody has been playing with wiring like fitting a radio or something and now they are touching

Dec 14, 2008 | 2001 Hyundai Accent

1 Answer

Fitting a Tow Bar


just put your tow bar up to the frame, it already has threaded holes in the frame to fit the bolts that came with your tow bar to it. It's really easy. everything should line up perfect

Oct 21, 2008 | 2002 Hyundai Santa Fe

1 Answer

How to wire a trailer to hyundai accent 2005


There is a wiring diagram for European trailers here, but I guess you are in the US.

Sep 06, 2008 | 2005 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...