Question about 2000 Chevrolet Blazer

1 Answer

Abs engagement at low speed

Turning into a parking spot or stopping at a light, even the end of my driveway, with litlle pedal pressure the abs kicks in, fights back and has almost caused an accident several times. new rotors and pads all the way around, after first noticing this with no change. I have since pulled the abs fuse out and now my rear brakes are sticky, so new calipers will be put on the back. I have owned this vehicle since it was new.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

Sounds like need new Calipers for front too. Maybe a new master cylinder may be need too. Sound like to Calipers or master cylinder are now letting to brake fluid go back to the master cylinder.

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ABS CHECK LIGHT DOESNT COME ON WHEN YOU TURN KEY ON


1. I would not be concerned because if there was a failure in the ABS you would definitely get an ABS warning light and the ABS and most likely the stability control/traction control systems (with added warning lights) will all switch off .

2. You can test if the ABS is operational. On a very quiet damp surface, straight, wide road( with NO other cars around), apply your brakes hard from a very low speed - up to 20 mph ONLY driving in a straight line - until the car stops. The front brakes should attempt to lock up under hard braking and if the ABS is operational you will feel it kick in and the brake pedal will pulsate as the ABS constantly allows brake pressure and then releases it to prevent the wheels from locking up on the damp road. If the ABS does not kick in be ready to release the brake pedal quickly to allow the wheels to rotate so you can steer the car safely. Without the ABS the front wheels should begin to lock up on the damp road surface due to the low level of tire grip. ONLY test this at very low speed and ONLY when driving in a straight line on a straight section of wide road with no other vehicles around.

Dec 15, 2015 | Cars & Trucks

2 Answers

My abs light comes on occasionally. everything seems fine, then some times I can't stop as well as I should. It seems that the abs is kicking in & it makes ticking noises in brake pedal area. It also...


There's a service bulliten about that problem with rust build-up on the front hubs pushing the sensors out of posistion [ most common on the pickups in areas that use road salt ], it happens mostly at very low speed. The best way to find out the problem is to have the system scanned.

Mar 17, 2011 | Chevrolet Aveo Cars & Trucks

2 Answers

Medium humming noise when backing up at low speeds


Probably rear brakes. Clean them up or get them looked at and try again.

Jul 14, 2010 | 2001 Honda Accord

1 Answer

Abs problem


check for warped rotors

Oct 02, 2009 | 2005 Chevrolet Silverado

1 Answer

Abs skipping


If you can test the car without the ABS module to ensure that the ABS is not the cause of the problem, If you have a spare module you can have it replaced for a while to test if the module is faulty,

Sep 02, 2009 | 2005 Chevrolet Silverado

1 Answer

ABS and Brake light stay on plus pedal is soft after tight turn


sounds like you have low brake fluid pressure and the pressure sensor is turning on warning lights saying there is low pressure and also pedal going to floor indicate this, sounds like master brake cylinder is worn out/broke and needs replace ment

Jul 07, 2009 | 1999 Dodge Ram

1 Answer

Abs engages at low speed on dry pavement


it could be 1 of the frt wheel sensors

Jan 31, 2009 | 1993 GMC Jimmy

1 Answer

Abs kicks in at low speed and pedal pressure


You have a weak or bad ABS sensor on one of the hubs. They are built into the hub and are not individually replaceable. Also rust buildup around the sensor will cause this same problem. To stop the ABS from kicking in untill repair just pull the fuse.

Jul 02, 2008 | 2001 Ford F150 Styleside SuperCrew

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

415 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...