Question about 1999 Ford F150 Regular Cab

1 Answer

Brake light will not work but the one in window does ever since I replaced the brake switch no brake lights will work.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

Do you have trailer light atachment plug??? Sometimes there is a T that the trailer plug, plugs into. Sometimes they get road film and dirty which make it loose connection to the tail lights. Check this plug out under the back of the truck. Also check your tail light bulbs, sometime they will be bad or have a bad connection. It is a cheep fit, just replace the bulbs. Also get someone to help you press the petal, and check for voltage with a meter at the T , & the bulb connection.

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2006 brake light will not go out


Light gets power from brake light switch/.May be switch got shorted an brake light getting non-stop power causing it not to turn OFF brake light.

Get the brake light switch checked. Check volt at brake light switch.

It can be faulty brake light switch causing the problem or its wiring short for switch.

==========

To trouble shoot brake related problem, check the help links mentioned below:-----


Click the link:----

1996 Buick Regal Grand Sport Brake light Switch Location?

http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------

No brake lights on Buick?

http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------

Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------

How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------

How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------

Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------

1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------

How to replace rear Brake lights on 2004 Toyota RAV4?

http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------

One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------

2002 Lincoln Town car Fuse Box

http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html

2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------

Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------

Brake lights not working

http://schematicsdiagram.blogspot.com/2012/11/brake-lights-not-working.html

-------

2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------


These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

I replaced light bulb and brake switch is there anything else that needs to be rp;acedto make brake light work


If you have already check fuses, and brake light's still don't work, it's going to be your turn signal switch, the brake light circit runs thought the brake light switch, if your car has a middle top brake light in back of rear window, most of the time that one will still work, and the turn signal will also work, but not the rear ones brake light's, when turn signal switch is bad, hope this was very helpful.

Aug 24, 2010 | 1997 Chevrolet Lumina

1 Answer

Seems that the hazard switch nalfucntion and no


Replace the multi-function switch in the steering column. The 3rd brake light is powered directly off the brake switch while the regular brake lights are wired thru the turn signal switch. Common problem

Jul 20, 2010 | 2001 Chevrolet Blazer

2 Answers

96 monte carlo rear window brake light works but not brake lights. tail lights work, blinkers work, replaced brake switch and bulbs still not working


This is a common GM specific problem. Your turn signal switch contains an elaborate networking device that has to cancel brakelights while running a turn light. Often times the ground within the turn signal switch is lost causing your situation. After investigating such other possibilities as fuses and loose grounds it may become necessary to replace the turn signal switch. Thank you, Dana

Sep 21, 2009 | 1998 Chevrolet Monte Carlo

2 Answers

1998 Chevrolet Monte Carlo brake lights do not


check blubs if the center light works should be working side brake lights

Sep 07, 2009 | 1998 Chevrolet Monte Carlo

2 Answers

1994 Buick Regal Grand Sport: Brake light in the window works fine. The 4 bulbs with two filaments in the tail-light housings do not become brighter though. The parking lights work. The signals/hazards...


i had the same problem had to replace the turn signal switch....GM for some reason wired the brake lights through the turn signal switch. to check if this is the case with yours. put some pressure on the turn signal lever as if you were going to turn on your brights and press your brake pedal and see if the lights work at that point that is how i found mine. hope this helps. if indeed they work with pressure on the turn signal lever. the new switch cost me $60 at autozone and that is with the steering wheel radio controls, make sure you get the proper switch should be part# sw771 if you have the radio controls on steering wheel and you will need a steering wheel puller and lock plate compressing tool.

Mar 31, 2009 | 1994 Buick Regal Gran Sport

1 Answer

2001 Chevy Lumina brake lights not working


test and replace the brake light switch, it is located at the top of the arm the brake pedal is attached to.

Mar 26, 2009 | 1997 Chevrolet Lumina

1 Answer

Brake lights


do you have a 3rd brake light like on that is on the roof or in the rear window? if so does it work?
the brake lights are usually a 2way bulb so just because the lights work doesn't mean that brake lights will. if the 3rd brake light works replace the brake light bulbs if none of them work including your 3 brake light. check into having your brake switch changed. that is the switch under the brake pedal. when it is pressed the brake lights come on and when released they go off. if the bulbs do not fix the problem than try the switch.

Jul 19, 2008 | 1987 Honda Accord

2 Answers

Brake Lights


The brake lights are engaged by a switch when you press the brake pedal. It is a plunger type switch, then when released, turns on the lights.

It appears that the plunger is not extending and making the connection. Try press on the brake pedal with one hand, and plull out on the switch plunger, see if the lights come on.

You should be able to replace the switch for less than $10


Jun 08, 2008 | 2004 Saturn ION

Not finding what you are looking for?
1999 Ford F150 Regular Cab Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...