- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.answers.com > ... > Categories > Cars & Vehicles > Asian Cars > Kia What is the torque specification for the cylinder head on a 2002 Kia Sportage? ... the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs. ... Thehead bolt torque settings, on your Kia 2.7 diesel engine, is 70 pounds per ...
YOU REMOVE THE CYLINDER HEAD COVER.YOU REMOVE SPARK PLUGS FROM TOP OF THE ENGINE CYLINDER HEAD.FIRST YOU REMOVE THE IGNITION COILS AND HIGH TENSION LEADS THEN REMOVE SPARK PLUGS.YOU NEED SPARK PLUGS SOCKET THE LONGER SOCKET WILL BE GOOD YOU NEED LONGER EXTENSION, YOU NEED SPARK PLUGS GAP GAUGE AND A 3/8 RATCHET WRENCH. YOU NEED A TORQUE WRENCH ITS NOT MANDATORT BUT JUST DONT OVER TIGHTEN SPARK PLUGS OR YOU WILL DAMAGE THE ALUMINUM HEAD THREADS.
alloy head petrol then its about 80lbs .diesel around 90 to a 100 not sure their as i just pull any head bolt down till i feel the bolt stretch but i wouldnt advise anyone to do it my way unless its another mechanic ,you know the sort of thing with a few mechanics taking the rise out of one and other ,like what do you want the torque wrench for ,you a weekend mechanic or what .
Before servicing the vehicle, refer to the precautions at the beginning of this section.
Drain the engine oil.
Remove or disconnect the following:
Negative battery cableIntake manifold bracket upper boltsClutch release cylinder and move it aside, if equippedIntake manifold bracket lower bolts and remove the bracketStarter from the clutch, manual transmissions onlyStarter from the torque converter, automatic transmissions onlyStarter electrical connectorsMove the transmission wire harness asideStarter
Fig. Exploded view of the starter
Install or connect the following:
Starter to the engine wellStarter electrical connectorsLower intake manifold bracket and install the upper boltsStarter into position. When aligned properly torque the bolts to 40 ft. lbs. (54 Nm).Torque the intake manifold bracket bolts to 40 ft. lbs. (54 Nm).Properly position the clutch release cylinder, if equipped. Torque the bolts to 40 ft. lbs. (54 Nm).Torque the intake manifold bracket upper bolts to 40 ft. lbs. (54 Nm).Negative battery cable