Question about 2003 Toyota ECHO

1 Answer

I am not able to find a 2NZ engines (Toyota echo) power steering pump and pulley here in Fiji.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Check the Toyota Parts Department at BobHowardToyota.com They are the Largest Dealership in Oklahoma and May Ship the Parts to You Or Know how you can get them to Fiji. Please Rate My Response! Thanks!

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 89 toyota corolla started making a strange rattling noise about a week ago but continued to run without problems. The noise started intermittently but became louder and more consistent. A neighborhood...


sounds like you need to replace the power steering pump,of not overheating or loosing coolant,would check water pump,if no power steering sonds like the pump is bad,mechanic depepnding on their ability could change for you,up to you if you want to pay a shop to replace pump.

Sep 02, 2011 | 1989 Toyota Corolla 2 Door

1 Answer

Which car has 1nz engine


Thie engine was used in the following form in the following vehicles:-

1.5 L (1497 cm³) Applications:

[edit]2NZ-FE 1.3 L

Applications:

[edit]

Feb 22, 2011 | 1996 Toyota Corolla

1 Answer

Power steering hard


Check for low power steering fluid, a broken belt (there is a belt that connects the engine's main drive pulley to the power steering, alternator, air conditioning, etc. pulleys) or your power steering pump went bad and will need to be replaced.

Feb 04, 2011 | Toyota Passenger Cars & Trucks

1 Answer

I have a 1995 lexus Ls400.is there a way to tighten the power steering pulley without removing it.


  • xus LS 400 and locate the power steering pump pulley, fluid reservoir and pump on the upper front driver side of the engine.
  • 2 Connect the pulley remove tool to the front of the power steering pulley. Brace the arms on the pulley tool on the **** of the pulley. Connect the metal key in the middle of the pulley tool to the nut in the middle of the pulley. Connect the power drill to the pulley tool and pull the trigger to remove the pulley securing nut. Remove the drive belt and the pulley.
  • 3 Position the drain container under the power steering pump. Remove the drain plug from the bottom of the pump using the metric ratchet set. Let the fluid drain from the pump into the drain container. Replace the drain plug to the bottom of the power steering pump.
  • 4 Remove the securing bolts from the right and left side of the reservoir and the pump using the metric ratchet set. Pull the pump upward and disconnect the hose from the bottom of the pump using the wrench. Pull the pump from the engine compartment.
  • 5 Lower the new power steering pump into the engine compartment. Reconnect the hose to the bottom of the power steering pump. Position the new power steering pump onto the engine. Replace the securing bolts the right and left side of the pump and reservoir. Tighten the bolts using the metric ratchet set.
  • 6 Replace the power steering pump pulley the opposite way that you removed it. Reconnect the drive belt.
  • Fill the power steering pump reservoir with fresh power steering fluid. Start the engine and rotate the steering wheel to circulate the new power steering fluid. I no i gave you directions on how to remove the whole power steering pump question is the pully loose or are you wanting to just change a belt good luck happy holidays


  • Dec 15, 2010 | Lexus LS 400 Cars & Trucks

    1 Answer

    Cant find were to put powersteering fluid


    Power Steering Pump Removal & Installation 3.8L Engine To Remove:
    1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
    2. Place a drain pan under the vehicle.
    3. Remove the accessory drive belt from the power steering pump pulley.
    4. Raise and safely support the vehicle.
    5. Remove the right front tire and wheel assembly.
    6. Remove the hoses from the power steering pump.
    7. Remove the mounting bolts and the power steering pump from the engine.
    8. Remove the reservoir and pulley from the pump if necessary.
    To Install:
    Power steering pump removal/installation (3.8L engine) gm-08-38-480.gif

    1. If removed, install the power steering pump reservoir and pulley on the power steering pump.
    2. Position the power steering pump to the engine and install the mounting bolts. Tighten the bolts to 25 lb ft (34 Nm).
    3. Install the pressure and return hoses to the pump.
    4. Install the right front tire and wheel assembly.
    5. Lower the vehicle.
    6. Install the accessory drive belt.
    7. Fill and bleed the power steering system.
    8. Inspect the system for leaks.
    9. Remove the drain pan from under the power steering pump area.
    3.4L Engine To Remove:
    1. Place a drain pan under the power steering pump.
    2. Remove the coolant reservoir.
    3. Remove the pulley from the power steering pump.
    4. Remove the wiring harness near the power steering pump and place it out of the way.
    5. Disconnect the fluid hoses from the power steering pump.
    6. Remove the mounting bolts from the power steering pump and remove the pump.
    To Install:
    Power steering pump removal/installation (3.4L engine) 88008g71.gif

    1. Position the power steering pump assembly to the engine and install the mounting bolts. Tighten the mounting bolts to 25 lb ft (34 Nm).
    2. Install the wiring harness in its original position.
    3. Install the pulley on the power steering pump.
    4. Install the coolant reservoir.
    5. Fill and bleed the power steering system.
    6. Inspect the system for leaks.
    7. Remove the drain pan from under the power steering pump.
    prev.gif next.gif

    Sep 18, 2010 | 2000 Chevrolet Impala

    1 Answer

    Removing power steering pump from v8 windsor


    Section 11-02A: Steering Pump, Power, C-II 1996 Aerostar, Ranger and Explorer Vehicles Workshop Manual REMOVAL AND INSTALLATION Pump and Pulley SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Steering Pump Pulley Remover T69L-10300-B Steering Pump Pulley Replacer T65P-3A733-C
    Removal
    1. Disconnect the power steering return hose (3A713) at the pump and drain fluid.
    1. Remove the power steering pressure hose (3A719) by unscrewing connector from the pump.
    1. On the Aerostar 3.0L V-6 engine (6007), loosen the drive belt tensioner (6B209) and adjustment bolts.





      Item Part Number Description 1 10346 Generator 2 8501 Water Pump 3 8678 Belt Idler Pulley 4 3A733 Power Steering Pump Pulley 5 6303 Crankshaft 6 2884 A/C Clutch 7 — Without A/C On the 2.3L I-4 and 4.0L V-6 engines, slacken belt tension by lifting drive belt tensioner in a counterclockwise direction. On Ranger 3.0L V-6 engines, slacken belt tension by lifting drive belt tensioner in a clockwise direction. Remove drive belt (8620) from under drive belt tensioner and slowly lower pulley to stop. Remove the drive belt from the power steering pump pulley (3A733).





      Item Part Number Description 1 10346 Generator 2 2884 A/C Clutch 3 3A733 Power Steering Pump Pulley 4 8501 Water Pump 5 6303 Crankshaft 6 8678 Belt Idler Pulley 7 6B209 Drive Belt Tensioner
    1. NOTE: If the drive belt requires servicing, refer to Section 03-05 .

      Remove the drive belt from the power steering pump pulley.
    1. Remove the oil dipstick tube.
    1. Remove the power steering pump support (3C511).
    1. Install Steering Pump Pulley Remover T69L-10300-B on the pulley.
    1. NOTE: Do not apply pressure on the power steering pump rotor shaft (3B559). Pressure will damage internal thrust areas of the power steering pump (3A674).

      While holding the remover tool nut stationary with a wrench, rotate the inner spindle of the remover tool clockwise until the pulley is pulled off the power steering pump rotor shaft.
    1. Remove the bolts attaching the power steering pump to the A/C compressor mounting bracket (2882).
    Installation
    1. Install the power steering pump on the A/C compressor mounting bracket. Install and tighten attaching bolts to 41-61 Nm (30-45 lb-ft). On 4.0L engine, tighten to 47-64 Nm (35-47 lb-ft).
    1. Position the support on the A/C compressor mounting bracket. Install mounting bolts and tighten to 47-64 Nm (35-47 lb-ft).
    1. NOTE: Fore/aft location of power steering pump pulley on power steering pump rotor shaft is critical. Incorrect belt alignment may cause drive belt squeal or chirp. Make sure pull-off groove on power steering pump pulley is facing front and flush with end of shaft ± 0.254mm (± 0.010 inch).

      Install the Steering Pump Pulley Replacer T65P-3A733-C and install the power steering pump pulley.
    1. Install the drive belt on the power steering pump pulley.
    1. On the 2.3L I-4, Ranger 3.0L V-6, and 4.0L V-6 engines, position and rotate drive belt on engine. While lifting drive belt tensioner in a counterclockwise direction (clockwise on Ranger 3.0L V-6), slide drive belt under drive belt tensioner and lower drive belt tensioner to drive belt.
      On Aerostar 3.0L V-6 engine, position the belt idler pulley (8678) assembly to give the drive belt the tension specified. Refer to belt tension check in Section 03-05 . Tighten the drive belt tensioner and adjustment bolts to 47-64 Nm (35-47 lb-ft).
    1. Install the power steering pump support, if removed.
    1. Install the oil dipstick tube.
    1. Install the pressure hose tube nut and new Teflon® wagner into power steering pump valve outlet fitting (3D654) and tighten to 41-54 Nm (30-40 lb-ft).
    1. Connect the power steering return hose to the power steering pump, and reposition the clamp.
    1. Fill the power steering oil reservoir (3A697) with Premium Power Steering Fluid E6AZ-19582-AA or equivalent fluid meeting specification ESW-M2C33-F. Start the engine and turn the steering wheel (3600) from left to right without hitting stops to remove air from the system.
    1. Check for leaks and recheck the fluid level. Add fluid if necessary to proper level as specified in Section 11-00 .


      Power Steering Pump and Power Steering Pulley, 2.3L TPH Engine, Ranger Only





      Item Part Number Description 1 2882 A/C Compressor Mounting Bracket 2 N606543-S2 Bolt (2 Req'd) 3 N606069-S2 Bolt (2 Req'd) 4 N605803-S2 Bolt 5 N800199-S8M Screw 6 3D673 Power Steering Pump Pulley 7 3F671 Power Steering Belt Idler Support 8 N806020-S2 Bolt 9 3A674 Power Steering Pump 10 19703 A/C Compressor A — Tighten to 21.2-29 Nm (16-21 Lb-Ft) B — Tighten to 40.3-55 Nm (30-41 Lb-Ft) C — Tighten to 44-51 Nm
      (32-38 Lb-Ft)

      Power Steering Pump and Power Steering Pulley, 3.0L Engine, Aerostar





      Item Part Number Description 1 3A674 Power Steering Pump 2 3C511 Power Steering Pump Support 3 6007 Engine 4 N803564 Stud 5 N802827-S2 Nut 6 N800199-S8M Screw (3 Req'd) 7 N8011179-S2 Screw (3 Req'd) 8

    Jun 09, 2010 | 1996 Ford Explorer

    1 Answer

    Can't change power steering belt on 2001 toyota echo


    take a look some pullies are spring loaded and it may require a ( not recommend unless stuck) but a pry bar. if spring loaded is the case there should be a tool that you could rent that is use for prying the pulley.

    Note: make sure to release slowly so not to damage pulley.

    May 08, 2009 | Toyota ECHO Cars & Trucks

    1 Answer

    Toyota echo steering is very stiff


    Look at the amount of power steering fluid in your power steering pump.
    If it is low, then add until a normal level.

    If you don't know how to check or add fluid correctly get help in doing so.

    If this does not help, then have the Power Steering Pump Tested by a mechanic.

    Nov 22, 2008 | 2005 Toyota ECHO

    Not finding what you are looking for?
    2003 Toyota ECHO Logo

    Related Topics:

    161 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    70346 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6869 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...