Question about 1999 Jeep Wrangler

2 Answers

1992 jeep wrangler (4.0l , standard)- power loss after warm up.

First 15 minutes of driving = quick acceleration , good power- normal.
after that jeep is warmed up good, and any acceleration (usually 3rd gear on), going above 2000 rpm - jeep starts to lose power and stumble. if i stay on the gas hard it will pop or backfire. i can't get above 45 mph, just any acceleration above 2ooo rpm and it just dogs out.
replace dist. cap, rotor , wires and plugs. fuel filter is 3 months old - but will replace it next.
any ideas - why it will run good for 15-20 minutes -- then just **** out?
i can turn off and let sit for 5 minutes - and i get normal operation for 10 minutes or so.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check your transmission fluid level and check for transmission fluid leaks. maybe 

Posted on May 16, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

Disconnect exhaust ,muffler or cat may be stopped up

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 92 Chevrolet s10 c/k 4.3litre TBI fuel injection pickup,,what can be causing loss of power wenpressing on gas? Otherwise,it run great.


Chevy S10 - GMC S15 and Sonoma Stalling/Dying Problems - Car ...

forums.edmunds.com > Chevrolet > Chevrolet S-10
Dec 15, 2007 - 30 posts - ‎22 authors please someone..i need help.i have 1992 gmc sonoma 4.3 6 cyl 2wd .... I have a 2001chevy s10 4.3 4wd auto, it runs good until it's warmed up, then once it's ... the gas pedal causes bouncing on the tachometer and loss of power. ... when driving at a steady speed if I try to accelerate the engine tries to die

Sep 24, 2015 | Chevrolet Cars & Trucks

1 Answer

1995 jeep wrangler whistling noise when accelerator pedal not down


Sounds like a vac leak, could be the power brake booster or a hose.

Jul 29, 2012 | 1995 Jeep Wrangler

1 Answer

I turn on the ignition switch and have to wait until I hear a clicking on 1994 jeep wrangler. On warm days the click happens quickly and on cold days, I have to wait 30 minutes to hear the click. Once it...


Did you check your battery cables? If they are loose or corroded you may not be getting a good connection, and of course it takes less power to start a car on a warm day than a cold one.

Apr 30, 2010 | 1991 Jeep Wrangler

1 Answer

1991 Jeep wrangler 2.5 standard shift.vacumn lines from transfur case to front drive axle.we need a picture of where each vacumn hose goes. a print out of the colors. thank you


i just boought a 1992 Jeep Wrangelr sport with a chevy 305 V8 and its a automatic with a standard 4 wheel drive and i put in 4 wheel drive and the front tires wont move what is wrong????

Mar 11, 2010 | 1990 Jeep Wrangler

1 Answer

Jeep won't start


we had a jeep with similar conditions at my college and we found it to be the crank sensor and it started and continued to run so test the connection and see if there is 5 volts going to the sensor

Feb 26, 2010 | 1992 Jeep Wrangler

2 Answers

97 jeep wrangler 2.5 auto, backfire and loss of power on warm day


COULD BE DIFFERENT THINGS BUT I RECOMEND TO HAVE IT CHECK WITH A GOOD SCANNER TO FIND OUT TROUBLE CODES BEFORE BEGIN SPENDING MONEY

Sep 24, 2009 | 1998 Jeep Wrangler

1 Answer

1992 Jeep Wrangler Loss of power


Check all your fuses make sure their good. Your fuel filter should be changed once a year. Or in worst case it might be your fuel pump. If it was a rough road it might have set off your emergency fuel shut off system. Check your owners manuel to find the lacation and reset button.

May 05, 2009 | 1992 Jeep Wrangler

1 Answer

1992 jeep wrangler with faulty acceleration. It


It is possibly the O2 sensor. I had some issues with early 90's 4.0 liters where the O2 sensor would stick rich under heavy acceleration and would cause it to lean out and bog down. It felt like a rochester four barrel flat spot on an old chevy. I hope this helps.

Apr 30, 2009 | 1992 Jeep Wrangler

2 Answers

2004 jeep wrangler


Clean the inside of the MAF sensor with MAF sensor spray, it is made bt CRC.

Oct 20, 2008 | 2004 Jeep Wrangler

Not finding what you are looking for?
1999 Jeep Wrangler Logo

713 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...