Question about 1997 Dodge Intrepid

1 Answer

My car wont start

I just put in a new watter pump battery altinater belts and now my car will turn over but it wont start

Posted by on

  • 8 more comments 
  • thomas margeson jr Jan 31, 2009

    im having the same prob i also switched the ac relay fuse with the fuel pump relay and still nothing. how would i check my pump with out taking it all the way out from under the car.

  • thomas margeson jr Jan 31, 2009

    wow i feal dumb i wrote a comment to my own problem. lol but i changed the relay. and nothing any thing else i can do



  • thomas margeson jr Jan 31, 2009

    ok how would i remove the fuel crank with out halfting to drop the gass tank
    and would u supose that it might b a frozen line and how would i check that to. im not verry good with this car stuff.


  • thomas margeson jr Jan 31, 2009

    well then its not the lines cause its not that cold out side and i havent put gass in the car in like 4 days and the fact that i was just driving it about 40 minits befor i had this problem



  • thomas margeson jr Jan 31, 2009

    what kind of rating ya want cause it was verry helpfull.

  • thomas margeson jr Jan 31, 2009

    hay bud hope u like it and thanks for the imediat attention and the hard work if u can think of any thing else give me a ding.



  • thomas margeson jr Jan 31, 2009

    ooh and do u know if im going to half to take the axle out of it to get to the gass tank or how it would work on a 1997 dodge intrepid 3.3l

  • thomas margeson jr Jan 31, 2009

    ok does it have an anti gass theft thing in it cause i still have 3/4 of a tank and i dont want it laying on my chest.



  • thomas margeson jr Jan 31, 2009

    just wondering if i could siphen it with a garden hose like we used to do back when we were kids lol the good old days



  • Anonymous Mar 28, 2014

    my dodge durango won't start, i just changed the serpentine belt, and has new battery, the belt turns and all pulleys are turning but it wont turn over

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Locate the Fuse Relay box under the Hood. In this Box are Relays for a lot of things one Being the Fuel Pump. Replace the Fue; Pump Relay and Check the Fuel Filter and Fuel Pump. Please Rate My Response! Thanks!

Posted on Jan 31, 2009

  • 6 more comments 
  • Travis Humphries
    Travis Humphries Jan 31, 2009

    You can Remove the Fuel Filter and Crank it like you are trying to Start the Car. If the Pump is Good, Gas will come out of the Line. If Not, The Pump is Bad. Please Rate My Response! Thanks!

  • Travis Humphries
    Travis Humphries Jan 31, 2009

    No Problem! We all feel that way from Time to Time!

  • Travis Humphries
    Travis Humphries Jan 31, 2009

    Unfortunately, You do have to Drop the Tank. I sure wish there was a Easier Way! The only way that the Line could Freeze is if you Had a LOT of Water in the Fuel. If it Ran Before, You should be Ok on this Prob.

  • Travis Humphries
    Travis Humphries Jan 31, 2009

    That's not a Prob. Then

  • Travis Humphries
    Travis Humphries Jan 31, 2009

    A Fixya would be Wonderful!!!!!!!! Thanks Man!

  • Travis Humphries
    Travis Humphries Jan 31, 2009

    It should slide right Over it if I remember Correctly. It's been a Few Years since I did one of this Model.

  • Travis Humphries
    Travis Humphries Jan 31, 2009

    No. You can Drain it and it will be Ok. Unless you need a Workout! LOL LOL

  • Travis Humphries
    Travis Humphries Jan 31, 2009

    You Bet! It ain't Everclear! Don't Drink it!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my car crank but it will turn over


maybe broken timing chain or belt or bad fuel pump or bad coil pack

Jan 03, 2015 | Cars & Trucks

1 Answer

This is the 3rd altinater we've put in and it's still saying charging system what can be the problem


make sure all grounds are good and clean,are you sure that the battery is not at fault,taking but not holding a charge,alt. should read approx.14.6 volts at idle,used alts are not always the way to go...belt tension?..

Apr 05, 2014 | 2004 Pontiac Grand Prix

2 Answers

Car won't start


Is the battery good in it?

Dec 04, 2012 | 1997 Lincoln Continental

1 Answer

Wont key start but will start by pushing it off


Its been a long time since you ask but check the main relay. It engages the starter and the fuel pump while cranking and after ignition a seperate fuel pump relay takes over. I had a car that did the same thing.

Feb 26, 2012 | 1994 Mazda MX-3

1 Answer

WHEN TURNING KEY IT WONT START LIKE A DEAD BATTERY JUMP IT, BUT STILL WONT START.


if it doesnt even click over straight nothing at all ....
battery is no go at all
1.if it starts off a jump.....
altinater could be bad...take positive battery terminal off battery while car is on ...if it stays running its good if car dies altinaters bad.
2.if its good replace battery with brand new one....
3.if the cars battery is brand new and car acts like it wants to start real bad but wont...
if you have gas in the vehicle and it sounds like it dont ... your ecm is bad electronic control module or ICM ignition control module.....its the brain the spark


Jan 14, 2010 | 2002 Chrysler Sebring

1 Answer

My 1997 mazda 626 lx isnt charging right it wont start after its shut off its worse at night when I need the head lights


Sounds like your altinater is going out. Take your car to auto zone or one of those places. They can check it for you. Once your altinater goes out you wont be driving any where cause thats what keeps your battery charged and keeps your car running. Do that today!

Nov 20, 2008 | Mazda 626 Cars & Trucks

Not finding what you are looking for?
1997 Dodge Intrepid Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...