Question about 2001 Chrysler PT Cruiser

1 Answer

Oil pressure light keeps coming on 2004 pt

Want to know where the oil pressure sending unit is located on the engine to change it

Posted by on

  • smmkeeler Feb 18, 2009

    I need to change the oil sending unit, i'm 90% sure thats the problem, my oil light goes on and off and there's allways enough oil... need help please

  • timlewis22 Mar 08, 2009

    oil light comes on intermittently after car has been warmed up,,,Does not happen when car is cold...Loss of power and strange idle when oil pressure light comes on...Plenty of oil present and oil is fairly clean...

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 124 Answers

Go to the following website for directions on removing and installing the Oil Pressure Sender:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800c1617

Hope you find what you are your looking for! Good Luck!
If you have any more problems let me know.

Thank you for using Fix Ya!

Don't forget to rate the overall satisfaction of this answer!

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil light intermittent on off on at idle or when driving at 2000Rpm, cause? Is the sending unit a possability?


Oil Pressure Light Acting Oldly - CarGurus

www.cargurus.com > Questions > Chrysler > PT Cruiser

CarGurusApr 2, 2012 - As I continue to drive, the RPM needed to keep the oil light off (and therefore ... and when the light does turn on, I'm either at the other end of town from ... let it idle for 15min with the dummy light flashing? does the engine start ...

Oil light intermittent on off on at idle or when driving at - Fixya

www.fixya.com/cars/t25990585-oil_light_intermittent_off_idle_or_when
2 hours ago - Oil light intermittent on off on at idle or when driving at 2000Rpm, cause? Is the sending unit a possability? Seems - Chrysler 2004 Town ...

Dec 02, 2015 | 2004 Chrysler Town & Country

1 Answer

Oil light keeps going off


Do you mean the oil light keeps coming on ?
If it is the oil pressure warning light, and the engine oil level is full, the sending unit could be faulty.

Aug 30, 2012 | 2006 Chrysler PT Cruiser

3 Answers

My 04 XTerra's oil light keeps coming on but there is oil in the car....not overheating, driving okay??? I am perplexed.


1st you need to do an oil pressure test. If it reads between 20psi-60psi, then it's Ok and you have a bad oil pressure switch. If it's below the above specs then you have an internal engine problem - IE: bad oil pump, bad bearing, etc...

Mar 12, 2011 | 2004 Nissan XTerra

1 Answer

Hello people, I recently did a full service on my golf3 (changed engine oil and what-not) but my oil light keeps coming on!Solution any1


Yes, if the engine oil and filter has been changed, but the oil light keeps coming on, then there may be pressure issues within the engine for the oil pressure, that is.

Connect a gauge where the oil pressure sending unit usually goes after unscrewing the sending unit, and measure the pressure to see if it within specifications. If below, then the engine's oil pump must be rebuilt or replaced in order to have enough pressure to lubricate the inside of the engine.

Please do this before the engine gets symptoms of oil starvation.

Good luck on this repair.

Jan 21, 2011 | 1993 Volkswagen Golf

1 Answer

I keep losing oil pressure in my 2004 f150 with a 4.6 litre. I have changed the filter and oil. What is the chance that the oil pump is bad? If so is it located inside the oil pan? Can I change the pump...


Ok 3 questions to answer:

1 yes the pump could be bad, but it is not likely.
2 yes it is in the oil pan.
3 yes you can change it without pulling the engine, though it is not easy.

Most common problem for your oil pressure reading to be going away, is the oil pressure sending unit(sensor) it is located next to the oil filter, check and replace if neccessary this sensor first and see if your oil pressure returns to normal. If not then you may have a pump problem. Hope this helps, let me know.

Jan 25, 2010 | 2004 Ford F150

2 Answers

Intermediate oil pressure light


Low oil level - add more.

Dec 04, 2009 | 2004 Dodge Neon

1 Answer

Where is the oil pressure sending unit on 2004 Dodge stratus


Most likely the oil pressure switch may be damaged. This is a simple procedure. Change and observe the results

Jan 23, 2009 | 2004 Dodge Stratus

5 Answers

Where is the oil pressure sending unit on 2004 dodge stratus?


per the Haynes manual for the 95-05 Dodge Stratus on the 2.0L & 2.4L DOHC 4 cyl engines, the oil pressure sending unit is located at the left end of the rear side of the block. On 2.4L SOHC 4 cyl engines, the sending unit is located at the left end of the rear side of the block. On 2.5L & 3.0L V6 engines, the sending unit is located on the oil filter housing, on the front side of the block. On 2.7L V6 engines, the sending unit is located at the left end of the rear side of the block. To access it, remove the heat shield.

Jan 23, 2009 | 2004 Dodge Stratus

1 Answer

Oil light keeps coming on and beeps


This is the pressure light, nothing to do with the oil needing to be being changed, you have low oil pressure being indicated, this will destroy the engine if the light is really indicating low oil pressure, have the oil pressure tested with a mechanical test guage at a shop, if the oil pressure is ok then replace the oil pressure light sending unit.

Nov 23, 2008 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
2001 Chrysler PT Cruiser Logo

915 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...