Question about 1992 Honda Accord

1 Answer

Park llight problem

How to replace the park light bulb on honda accord 1992 lx..coz the right park light is not working..

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

If it is the front front just a screw and pull out the light/ if it is the rear then you will have to dtrim the rear trim cover for access and with a 10 mm socket take the bolts off and pull the light out / Please rate my response thank you very much

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace glove box light in a 1993 Honda Accord


How to replace 95 Honda Accord EX Glove Compartment Box Light Bulb

Mar 07, 2012 | 1993 Honda Accord

2 Answers

Need wiring diagram for 1992 honda accord lx to trace


how can i fix my problem on a 1995 honda accord ex headlights wiring when i turn on the switch the parking lights come on but the headlights do not come on what do i need to do

Feb 09, 2012 | 1992 Honda Accord

1 Answer

My fiance has 1992 Honda Accord LX....often, when


check the Main Relay , sound like you a bad Main Relay.

Apr 19, 2010 | 1992 Honda Accord

1 Answer

How do i change the rear brake lamps in a 1992 honda accord lx?


Inside the trunk you will have to pull back the carpet and a the carpet material behind the tail light assembly should have nuts 2-4. once these are removed the assembly can be removed from the outside. Just turn the light socket and replace the bulb.

Apr 04, 2010 | 1992 Honda Accord

1 Answer

1992 Honda Accord LX intermittantly shifts correctly


-very important check for brake light when pressed (outside rear)
-did u recently change any bulb at the rear if yes recheck if it the right brake light bulb 1157
u need to do a dignostic for the d4 light and it will lead u to the problem

Oct 05, 2009 | 1992 Honda Accord

2 Answers

Clock does not light up


There is a buln in the back of the clock. If you remove the clock, it pulls right out, you can get a new (tiny!) bulb from the dealer. If you smack the clock it will probably come back on. These are very common.

Jan 19, 2009 | 2000 Honda Accord

1 Answer

Brake lights


the bulb is a dual filament try replacing the bulb

Nov 19, 2008 | 1992 Honda Accord

1 Answer

1992 honda accord LX Blinkers


check the hazard switch ive seen them stick or wear out and nothing works. good luck also look for a bulb with only one prong on the end of the bulb it will short the dash lights to keep signal on

Sep 14, 2008 | 1992 Honda Accord

3 Answers

1992 Honda Accord LX Brake Light Switch Repair


Of course you can make this repair! I'm wondering about the faulty bulb that shorted out all the brake lights...not sure if that's what happened. Your brake light switch is located on the brake pedal, up above where your foot goes. It has a plug in connector which you unplug, then loosen the locknut where it attaches to the pedal.Put in the new switch, lock nut 1st, then plug it in. Note that the locknut is the adjustment point that determines when your brake lights go on. Adjust the locknut so that the brake lights go on when the pedal is depressed within 1/2 an inch (13mm)of pushing down on it. If the switch is adjusted without enough play (say 1/8 inch or less), brake lights may flicker on and off when you go over a bump.If over 1/2 inch, brake lights might go on only if great force on pedal is used (or not at all, yikes!).For good diagrams of parts check out South Bay Honda (hondapartscheap)web site. You enter the year, model, engine, and you can scroll thru tons of parts. If you have any more questions, do not hesitate to post it for me. countrycurt0

Aug 05, 2008 | 1992 Honda Accord

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...