Question about 1992 Pontiac Firebird

1 Answer

Trying to locate the turn signal

Help:) trying to locate the turn signal fuse on the control panel...no cover and no manual...going crazy!!!

TINA

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

There is no fuse for the turn siganls just headlights on the fuse box did you check both fuses under the dash and also the one in the engine compartment/ check those / if you need to ask how to get the park lamps off just let me know/ Please rate my response thankyou very much

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1998 chevy suburban. The dome lights don't work. checked fuse box under hood. All good. Are there other fuses on the truck?


Instrument Panel Fuse Block
The instrument panel fuse block access door is
located on the driver side edge of the instrument panel.

Pull off the cover to access the fuse block.

The vehicle may not use all of the fuses shown.

Fuses Usage
1 Rear Seats
2 Rear Accessory Power Outlet
3 Steering Wheel Controls Back light
4 Driver Door Module
5 Dome Lamps, Driver Side Turn Signal
6 Driver Side Turn Signal, Stop lamp
7 Instrument Panel Back Lighting
8 Passenger Side Turn Signal, Stop lamp
9 Passenger Door Module, Driver Unlock
10 Power Door Lock 2 (Unlock Feature)
11 Power Door Lock 2 (Lock Feature)
12 Stop lamps, Centre High Mounted Stop lamp
13 Rear Climate Controls
14 Power Mirror
15 Body Control Module (BCM)
16 Accessory Power Outlets
17 Interior Lamps
18 Power Door Lock 1 (Unlock Feature)
19 Rear Seat Entertainment
20 Ultrasonic Rear Parking Assist, Power Liftgate
21 Power Door Lock 1 (Lock Feature)
22 Driver Information Centre (DIC)
23 Rear Wiper
24 Cooled Seats
25 Driver Seat Module, Remote Key less Entry System
26 Driver Power Door Lock (Unlock Feature)

Aug 23, 2011 | Chevrolet Suburban 2500 Cars & Trucks

1 Answer

My turn signals and emergency flashers work some time where is the turn signal flasher relay located and how do you detach it?


For 1998 Ford Truck Explorer 4WD 4.0L EFI SOHC 6cyl the Flasher is located in front seating area, driver side, behind dash, mounted on steering column.

Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel.

The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel.

Hope helps.

Jan 26, 2011 | 1998 Ford Explorer

1 Answer

Turn on the car then click the signal light and nothing!!! no tic to light nothing could it be the signal light switch or a fuse?? please help!!


Try the flasher unit first, checking it costs nothing. Turn on your emergency flashers and if they work, get your owners manual and find the fuse panel locations. Inside the manual or the panel cover there will be a legend as to what is what. You will have two flasher units, one for turn signals and the other emergency flashers. They are the same units so just switch them, if your turn signals now work, but your flashers don't, then you have a bad flasher unit. Go buy another at any auto parts store and put it in the correct socket, you rarely use the emergency flashers so you want your new one in the turn signal circuit.

If that does not do it then you may have a broken switch which requires pulling the steering wheel off to fix. That is not an owner service thing. One bad light bulb is not going to knock them all out.

Jan 05, 2011 | Mercury Cougar Cars & Trucks

3 Answers

I have a 2000 ford explorer and both my 4 way flashers and turn signals are not working


check the fuses and both flasher cans,if not working then,u need to check the blinker switch

Dec 23, 2010 | 2000 Ford Explorer

2 Answers

I need to change my turning signal fuse in a 2000 mercury sable but cannot locate the fuse relay. Can anyone tell me where it is located. I have no turning signals right now!


For 2000 Mercury Sable 3.0L EFI DOHC 6cyl the Flasher is located on front seating area, driver side, under dash, mounted in junction block.

zjlimited_253.jpg

Passenger compartment fuse panel
The fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover to access the fuses. To remove a fuse use the fuse puller tool provided on the fuse panel cover. I suggtes check the next positions...

zjlimited_254.jpg


zjlimited_255.jpg

Hope this helps (remember to rate and comment this).

Dec 16, 2010 | 2000 Mercury Sable

1 Answer

Where turn signal flasher fuse located on a 1997 monte carlo?


COMBINATION TURN SIGNAL AND HAZARD FLASHER MOUNTED TO FIREWALL TO THE LEFT OF THE STEERING COLUMN UNDER THE INSTRUMENT PANEL.FUSE TO TURN SIGNAL FLASHER IS IN FUSE BOX ON THE PASSENGER COMPARTMENT RIGHT SIDE OF THE INSTRUMENT PANEL.LOOK AT THE FUSE COVER IT WILL TELL YOU LOCATION OF FUSE FOR CIRCUIT IT CONTROLS.YOU ALSO HAVE FUSES IN THE ENGINE COMPARTMENT NEXT TO WINDSHIELD WASHER FLUID RESERVOIR.

Sep 09, 2010 | 1997 Chevrolet Monte Carlo

1 Answer

No turn signals or hazard lights


Check the FLASHER, also can review the Fuses, located inside the passenger compartment, under the drivers-side of the instrument panel.

Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel.

The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel.


0c18614.jpg

To access the fuses, remove the fuse panel cover. Note the spare fuses (A) and provided fuse puller tool


108630c.jpg

Fuse panel and power distribution box identification for 1995-99 Explorer/Mountaineer models-Part 1


de415d0.jpg

Fuse panel and power distribution box identification for 1995-99 Explorer/Mountaineer models-Part 2


6cf9ee7.jpg

Fuse panel and power distribution box identification for 1995-99 Explorer/Mountaineer models-Part 3


Power Distribution Box
Located under the hood, in the engine compartment. It houses the fuses and relays for most of the under hood components which are not controlled by a dash mounted switch (such as the alternator, fuel pump, ECM, etc.). The fuses and relays are replaced in the same manner as the fuse panel inside the vehicle. The power distribution box cover is hinged on one end and utilizes a retaining latch on the other. Simply release the latch and lift the cover up to gain access to the fuses and relays.

Hope helped with this; remember rated this help. Good luck.


Nov 12, 2009 | 1999 Ford Explorer

2 Answers

No trun signals and emergency flashers


The fuse panel is located to the left of the steering column, and is hung from the instrument panel. To expose the fuse panel, pull the release bar up with right hand and pull panel down with left hand and remove cover.

Replace the blown fuse with the same amp number listed on the old one.

Front and rear turn signals use slot 1 with a 15 amp fuse.

May 02, 2009 | 1993 Ford Taurus

2 Answers

I need to locate and replace the multi function switch


My turn signal flasher was located to the right of the ash tray, I looked around the column for HOURS and it wasn't there... I also have an 93 oldsmobile cutlass ciera, it drove me crazy because the manual wasn't correct.

Feb 27, 2009 | 1993 Oldsmobile Cutlass Ciera

3 Answers

I do not have a manual for my 1996 nissan altima but the fuse has been blown that controls the turn signals. in lieu of pulling each fuse out, can you tell me the specific location of said fuse?


call auto zone
they usally have things on their computer
that will help
or check with nissan parts department if they are nice they will look it up for you

Jan 31, 2009 | Nissan Altima Cars & Trucks

Not finding what you are looking for?
1992 Pontiac Firebird Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...