Question about 1997 Ford Expedition

1 Answer

HOW DO I REPLACE THE DRIVER SIDE POWER MIRROR ON AN 98 F-150?

I'M HAVING TROUBLE REMOVING DRIVER SIDE POWER MIRROR?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 783 Answers

Remove the sail panel,the little panel on inside of door at the mirror.
Remove the window regulator switch plate, pry up on the front of it with a small pick or screw driver. Disconnect the electrical connectors.
Remove the top door trim panel screw that is behind the sail panel you removed.
Remove door trim panel screw at window regulator switch plate opening.
Remove door trim panel screw in the courtesy lamp housing. Remove the courtesy lamp lens.Remove the screw.
Remove the inside door handle trim cover.
Remove the bolt.
Remove the inside door handle.
Lift upward to remove the front door trim panel.
Remove the courtesy lamp.
Turn the courtesy lamp bulb socket one quarter turn and remove.
Disconnect the power mirror electrical connector.
Remove the three outside rear view mirror nuts.
Remove the mirror.

Posted on Jan 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Having trouble getting the side mirrors off.


you have to remove the inner door panels. there are three screws honling on the mirror. if they are power mirrors you need to disconnect the wires as well.

Jan 16, 2011 | 1986 Pontiac Fiero

1 Answer

2003 Navigator: remove driver-side Power Mirror


no need to remove the door.. just open the screws of the inside concole , opening handle and lever .. take out the console and u will see the screws to open the mirror.

Jul 29, 2010 | 2003 Ford Expedition

1 Answer

Replace driver side power mirror on 2003 ford crew cab f-150


Muth makes the signal mirrors for repalcing the glass in the mirror head. On the site, they have nice instructions you can use for removing the door panel, and getting the mirror off ( obviously stop at the removing the glass part, and just replace with the mirror head you already have ).

Enter the Make, MY, and model you have, and on the products page are the links to the PDF version of the instructions for download.

www.kwmuth.com

May 19, 2010 | 2003 Ford F150 Regular Cab

1 Answer

Need to replace drivers side power mirror on 1999


Remove that plastic piece at the top of the door panel, ( it just unsnaps straight out), use a small screwdriver or putty knife to help pry it up, it's held in place by plastic clips so be gentle.
Unplug the connector from the mirror,
Remove the nuts and the mirror assembly will come off, don't let it fall.
Installation is the reverse.

Jan 13, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Hello, I'm having trouble removing the face of the mirror to install the electrical plug inside the passenger side mirror on a 2004 dodge ram. thanks


what plug. what is this plug for and how did it unplug, some of these mirrors dont come apart they will break the arms for power mirror movement, some do you have to go behind it with a thin screw driver and pop it out, i ve never seen plugs behind the lens its always hard wired, hope this helps.

Dec 23, 2009 | 2004 Dodge Ram

1 Answer

Replace driver side mirror


The entire assembly has to be replaced, can not just replace the mirror.Remove the plastic trim on the inside of the door on the top part of the panel, either comes off with one screw or bolt or simply pull and it has pins in it.Then remove your bolts that hold the mirror in from the inside.If you have a power mirror remove the electrical pigtail, then simply reinstall.Hope I could help..HAPPY HOLIDAYS!!!

Dec 22, 2009 | 2006 Toyota 4Runner

2 Answers

How to remove/replace driver's side mirror on 96 blazer


remove door panel.. there should be access hole to get to the bolts.

Jul 31, 2009 | 1996 Chevrolet Blazer

1 Answer

Whatis the procedure to replace the driver's side on 2005 Freesty


2005 Freestyle/Five Hundred/Montego Workshop Manual
  1. Remove the exterior mirror trim cover.(on inside of door)
  1. Disconnect the exterior mirror electrical connector.
  1. Remove the 3 exterior mirror nuts.
  1. Remove the exterior mirror.
  1. To install, reverse the removal procedure.

Jul 23, 2009 | 2005 Ford Freestyle

1 Answer

99 explorer drivers side mirror vibrates


are you trting to tighten the mirror glass or the mirror where it attaches to the body? I don't think glass is removable in 99. Only can try to press on glass to seat if unseated. not too hard.

  1. Remove the front door trim panel; refer to Section 501-05 .
  2. go to car-part.com for a used mirror. Page with * is cheapest seller.
  1. Remove the speaker.
    1. Remove the screws.
    1. Disconnect the electrical connector.
    1. Remove the speaker.
  1. Remove the outside rear view mirror (17682).
    1. Disconnect the power mirror wiring clips.
    1. Remove the outside rear view mirror nuts.
    1. Remove the outside rear view mirror.
      • Feed the power mirror wiring through the opening in the front door (20124).
------------------------------------------------------
f9d70e9.gif
----------------------------
SECTION 501-09: Rear View Mirrors 2001 Explorer/Mountaineer Workshop Manual
REMOVAL AND INSTALLATION Exterior Mirror Glass, 2001 model Removal
NOTE: Exterior mirror glass is serviceable only on vehicles built after July of 2001.
NOTE: Passenger side exterior mirror shown, driver side exterior mirror similar.
All mirrors
  1. Position the glass in the full up position.
  1. Locate the notch at the bottom of the exterior mirror glass.
  1. Release the exterior mirror glass.
    1. Insert a long flat-bladed screwdriver in the notch.
    1. Push the screwdriver into the notch until the glass is released.
Heated mirrors
  1. Position aside the exterior mirror glass.
  1. Disconnect the electrical connectors.
All mirrors
  1. Remove the exterior mirror glass (17K707) passenger side or (17T675) driver side.
Installation
Heated mirrors
  1. Connect the electrical connectors.
All mirrors
  1. Position the exterior mirror glass on the exterior mirror motor.
  1. Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the glass in place until fully seated.
4d9527f.gif

Apr 12, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
1997 Ford Expedition Logo

760 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...