Question about 2002 Ford Taurus

1 Answer

Where can I get a keypad for my Taurus?

Anyone know where I can buy a keypad for my 2002 Taurus SES? It has remote unlock, but not the keypad. I'm hoping I can remove the existing door handle panel, and replace it with one that has the keypad. I'm thinking that there's a good chance the wiring is there, but the feature just wasn't ordered by the original owner.

Just wondering. Thanks.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

The best way is to go to a ford dealer they can get the codes of the vin # and get it for you quickly/ Please rate my response Thank you very much

Posted on Jan 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ignition key does not unlock the doors on my 2002 mercury sable is there a key for the doors and where would i get them


It's the same key, you have to slightly and gently push down as your turning the key. I have a 01 Taurus SES. They are basically the same car. This is also part of the anti theft system. If you haven't used the key much (using the remote mostly) it may be a little stiff. You can try the other front door.

Jan 13, 2013 | 2002 Mercury Sable

1 Answer

My SES Taurus will not start and shuts off by itself!


how to install software to gfive g111
mobile

May 19, 2012 | 2002 Ford Taurus

1 Answer

How do I repair the blend door on my 2002 Taurus SES?


whats it doin? do u need to know how to get to it?

Jan 25, 2011 | 2002 Ford Taurus

1 Answer

Doors won't lock with remote on my 2002 Lexus GS 300.


are you sure the battery is good in the remote? if so try putting the key in the driver door lock and locking and unlocking the doors three times in a row. if this dosent work i suggest taking it to an experienced lexus shop.

Oct 06, 2009 | 2002 Lexus Gs 300

1 Answer

How do I program remote to unlock the doors of 2002 ford taurus?


Come on chat wherein you can stand close to the car while I guide you.

I am Murphybanton.

I am online now.

Oct 05, 2009 | 2002 Ford Taurus

1 Answer

Key Pad Entry does not work


does the key pad light when you press a button at night? If yes, the fuse is ok.
Do you have the plastic card with the permanent code in your owner manual packet? If yes, tryit.
report back.

Keyless Entry The keyless entry keypad is hardwired to the GEM. The GEM interprets the inputs from the keyless entry keypad and then controls the associated operation. The keyless entry keypad will be illuminated for five seconds when any button is pressed. Additionally, it will request the illuminated entry feature to turn the courtesy lamps on. If a lock all doors code is entered, the illumination will turn off, as well as request the illuminated entry feature to turn off the courtesy lamps. When pressed, the keyless entry keypad supplies the ground signal to the GEM or the GEM receives a signal from the keyless entry remote transmitter. Then the GEM outputs a ground signal to the appropriate lock or unlock relay which supplies the power to the actuator to lock or unlocks all doors, including the luggage compartment. The keyless entry remote transmitter also unlocks the liftgate or activates the panic alarm by sending a signal to the GEM.
--------------------------------------------------------------- Visual Inspection Chart Mechanical Electrical
  • Keyless entry keypad
  • Keyless entry remote transmitter
  • Central junction box (CJB) Fuse F222 (20A)
  • Circuitry
  • Generic electronic module (GEM)
------------------------------------------------------------------------
  • No communication with generic electronic module (GEM)
  • Generic electronic module.
  • Circuitry.
  • REFER to Section 419-10 .
------------------------------------------------------------------------------------

Mar 08, 2009 | 2003 Ford Taurus

1 Answer

Keyless entry remote


in most cases you have to take it to a dealer to have it programmed look in the owners manual to see if it tells you anything and if it doesn't you have to take it to a dealer to have it programmed

Jan 30, 2009 | 2002 Ford Taurus

1 Answer

2003 ford futura programming a new keypad


Adding and Removing remote Keypads to the Smartlock module
------------------------------
Up to four Keypads can be programmed and used with the Smartlock Remote
Central locking system.
If you have replaced the BEM, or new keypads are being added to the
system, you will need to train the keypad codes to the module.
# 1. The ignition switch should be in the Off position, with all the
doors shut and Unlocked.
# 2. Turn the ignition key to the ACCESSORY position and within 5
seconds, operates the rear demister switch exactly three times in quick
succession. (IE. Press the switch so the Demister light turns on, then
off, then back on again.)
# 3. After the 5 seconds is up, the door locks will change state, to
indicate that the BEM has entered keypad learn mode.
NOTE : All existing keypads at this point, have been erased from memory
!
# 4. Press either buttons on the keypad that is to be trained. The door
locks will change state twice, to indicate that the keypad has been
added to the BEM memory.
# 5. Follow step 4. for each keypad that is to be added to the BEM
memory. A maximum of 4 keypads can be added to the BEM memory.NOTE :
You must teach all remote keypads for the Smartlock module, before
proceeding.
# 6. When you have taught all the remote keypads, turn the ignition to
the Off position to leave the learn mode. The door locks will change
state to indicate a return to normal mode.
# 7. Check the function of both buttons on each keypad, to ensure that
the keypad has been trained.

Sep 15, 2008 | Ford Futura Cars & Trucks

Not finding what you are looking for?
2002 Ford Taurus Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5581 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...