Question about 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

My instrument panel lights stay on when I shut off my truck, and even after I get out. All the doors seem to be closed tightly. Right before this started happening the little red battery light would come on and stay on when I turned off the truck. I haven't lost power yet, but it hasn't been left like that (with the panel lights on) for more than about a 1/2 hour.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 223 Answers

Wonderful thing that cluster is! They are defective. Take it to your dealer and they should change it. Its a recall from GM.

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 chevy 2500 (new style) parking lights wont shut off


The parking lights staying on and the left turn signal not working may not be related, the turn signal is probably a burned out bulb, turn on the left signal and see if all the bulbs light up if not replace the burnt one, if they all light, the turn signal flasher may be at fault ( it can work with one side and not the other), as far as the parking lights staying on, check the door "pin" switch that controls the interior lights (are the interior lights staying on too?), since the chimes are staying on even with the keys on , I would suspect the door pin switch, probably the drivers side. I believe there may be a timer on the parking lights that turn them off after several seconds after the door is closed, this may be at fault if not the pin switch. newer cars and trucks also leave the reverse lights on for a while after the door is closed.

Dec 20, 2013 | Chevrolet Silverado Cars & Trucks

1 Answer

It seems that even with the doors and the hatch closed, the light stays on and the open door light is on. Not sure why


Did you check the glass panel in the hatch was closed properly? I've inadvertently opened it (while trying to open the hatch) and forgot to close it properly, thus keeping the open door light on.

Dec 31, 2010 | 2004 Mazda Tribute

1 Answer

Door ajar light is on but all doors are closed? Havent checked anything aside from shutting all the doors. Its a 2003 vw jetta gl 2.0l 4cyl. Not sure why the door open light in the driver panel stays on


It appears that one of the door operated switches is making contact even though the door is closed. This is indicated by the door open light coming on It could mean one of the the door catches is slightly out of adjustment allowing door to sit slightly away from body. Try checking each door for a loose fit by pushing the closed door in, especially the driver's which gets the most use and see if the light goes out. There should be only a little movement as the sealing rubbers are squeezed a little more. If door catches are tight then it may be that the rubber pad attached to the door that pushes on the door switch button has compressed and is allowing switch to make contact.

Oct 26, 2010 | 2003 Volkswagen Jetta TDI

1 Answer

Door ajar light stays lit when all doors are shut 2005 GMC Canyon


Hi,
This seems that either of the door switches is/are faulty. Try pushing the switches fully on each plunger switch on each door individually, keeping the other doors closed while you do. See if one of them causes the light to go out. If you do find one turns the light off, it's an adjustment problem with the plunger switch. May still need to be replaced if it won't depress enough with the door closing to turn off.Let us know if you were looking for something more else please accept the suggestion.
Thank You for contacting Fixya.com

Feb 17, 2010 | 2004 GMC Canyon

2 Answers

Dome light and doors open light stay on when driving.


check you door switch buttons to see if they will each turn off the lights. Open one door at a time, push the door push button by hand and see if the lights go out. If they do, that is your probelm switch or the door is not closing tight enough to psuh the pluger button all the way in.

Apr 25, 2009 | 1999 Ford Taurus

1 Answer

Rear tailgate indicator light stays on even though tailgate is closed tight. with this light staying on the doors will not lock. Is there a sensor in the tailgate door that might be obstructed.


take the panel off the tailgate and check ur tailgate latch and or switch. may need replacement . be sure not to slam the tailgate down too hard anything, could damage the latch

Apr 04, 2009 | 2005 Honda Pilot

3 Answers

Interior Light sometimes will not shut off in Ford Ranger Pick up


If I am not mistaken, the plunger is located in the door with the latch. Most of the time you can just pull the door panel off and adjust the switch. After opening and closing the door, they get knocked out of adjustment. I sincerely hope that this helped you. Take care and best wishes.
Bryon

Mar 20, 2009 | 1997 Ford Ranger SuperCab

1 Answer

Interior dome light/exterior cab light stays on -won't shut off


Lube your door latches. One of the door ajar switches are sticking . Use wd40 or some othe spray lube . Spray into the latch and open and close doors several time.

Jan 25, 2009 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Electrical / Lights / Gages


Pull instrument/ cluster panel and re-melt cold solder joints where circuit board connects to dash connectors. Get them hot enough to turn them bright silver, usually 3-5 seconds each pin.
Good Luck!

Jun 24, 2008 | 1996 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...