I'm wondering if someone can give me step-by-step instructions on how to remove my Clarion Dx515 stereo from my 1995 Geo Metro Hatchback. The "keys" that came with it don't seem to work at all and is very frustrating. Thanks in advance.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Normally there is another screw or connections towards the back. Under the steering wheel, remove the panel near the stereo. Also, remove the panel on the right side as well. This will give you access to the rear of the stereo and you will see another screw.
Remove the EGR Unit from the Engine (Keep Vacuum Hoses attached) move out of the way. Then you need to remove that large plastic EGR box (on the firewall) Once you do that you can get to that darn starter to replace it.
Ok here is the low down.
To replace the water pump you must remove the timming belt as well as many other items.
Are you mechanicaly inclined or would you be better off having a pro handle the job? They have the tools to make it easy.
Let me know i'll give you step by step if you want it, but it is a long procedure.
before you start you have to disconnect negative battery terminal. Remove glovebox.Remove harness connectors from ECM (electronic control module). To access blower motor resistor, remove ECM and disconnect blower resistor (remove screw and resistor mounted on heater case. To install reverse removal procedure.
Hope it helps