Question about 2002 Chevrolet Tahoe

1 Answer

I have a 99 z71 my driverside window will not move.

Replaced the switch and motor still wont move.can anyone help?

Posted by on

  • 2 more comments 
  • bks55758 Jan 30, 2009

    yea its getting power sometimes when ya wiggle the wires it will move some.could it be the wiring harness?

  • Mike Butler
    Mike Butler May 11, 2010

    Concentrate on areas of wire that are moving, is it right at plug, at a bend, or what?

  • Paul Broadhurst May 11, 2010

    Are you getting 12v+ to the switch and a good ground?

  • Mike Butler
    Mike Butler May 11, 2010

    have you confirmed that motor is getting power?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Do u hear a crackeling sound? if so stop using it... it needs to have the window regullater assy. replaced. it usually is about 116.00 from advanced auto. that should include the motor assy too.

Posted on Mar 11, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Driverside power window ,wont go down,replaced switch and motor

your problem will be in the wiring from the motor to the switch
Most break inside the door jamb area inside the rubber boot protecting the wiring.
the door opens and closes so much it will break the wire in due time
remove the boot and inspect which one needs repairing

Mar 10, 2010 | 1995 Chevrolet Camaro

4 Answers

99 grand prix gt window regulator?

Noises are deceptive at best.

Until you pull the door panel you really can't be sure what it is.

It could be a rusted rail or the window fell off the rail , or, or,o have one of them look and hunt problems.

Most window issues are easily fixed if you have the slightest mechanical apptitude, it won't be that hard.

I hope this helps you some

Thanks for letting ya


Sep 14, 2009 | 1999 Pontiac Grand Prix

1 Answer

Power windows on front passanger side not working.

replace the window motor if u believe the switches are good.

Aug 07, 2009 | 1999 Cadillac DeVille

1 Answer

Front driverside power window

Remove the door panel, locate power window motor and unplug. With a test light or meter, check for voltage at the plug while pushing window switch. You will see voltage at one wire to ground for up and the other wire to ground for down. If you have voltage at the plug, replace motor. If no voltage, check switch and wiring. Switch is probable cause for no voltage at motor plug.

May 27, 2009 | 2006 Dodge Stratus

1 Answer

Non Working driverside power window 86 GMC

sounds like you need a window regulator to me check napa or a good parts store

Mar 19, 2009 | 1986 GMC G3500

2 Answers

Power locks and mirrors out. Driver power window out.

Your chevy uses two fuses for the system. The power lock actuators are on the 15 amp fuse inside the truck. The fuse for the switches (locks and mirrors) are under the hood. For 99 to 04 (I think those are the years) there is a TSB on replacing the 3 amp fuse under the hood with a 5 amp fuse because this is a well known problem of having these blow.

Your drivers side window is a different issue. If the rest are working your problem is in the motor or getting power to the motor. The wires that go from the body to the door often crack and break with the opening and closing of the door.

Dec 10, 2008 | 1999 Chevrolet Silverado 1500

1 Answer

1992 Honda Accord Driverside window moving extemely slow.

It's going to either be your window lift motor, or the switch/switch contacts.

I would recommend taking the switch housing apart and cleaning the contacts, and if that doesn't work, replacing the switch.

I always leave the most expensive part (lift motor) for last.

Nov 29, 2008 | 2000 Honda Accord

Not finding what you are looking for?
2002 Chevrolet Tahoe Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides