Question about 2008 Lincoln Navigator

1 Answer

Need to reset the oil change indicator, changed oil myself

How do you reset the oil change calculator on a 2008 Navigator?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Lincoln Master
  • 783 Answers

Press and release the setup button to display oil life= xxx
then press and hold the reset button for about 2 sec it should then display oil life set to 100%

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset the oil life indicator on a 2008 lincoln navigator


press and release the setup button to display oil life= xxx
then press and hold the reset button for 2 or 3 sec it should then display oil life set to 100%
also refer to the owners manual, it will have detailed instructions in there good luck

May 14, 2011 | 2008 Lincoln Navigator

1 Answer

I acnnot find how to reset the oil change required indicator light on my 2008 Mercury Sable


The following procedure will reset your oil change light. Thank you for using Fixya!

2008-2010 Sable
  1. Turn the ignition to run (one position before starting engine).
  2. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW".
  3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Mar 04, 2011 | 2008 Mercury Sable

3 Answers

NEED TO RESET OIL CHANGE LIGHT


How to Reset the Engine Oil Life System
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system.
Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the Engine Oil Life System:
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button on the DIC for more than five seconds. The oil life will change to 100%.
If the CHANGE ENGINE OIL SOON message comes back on when the vehicle is started, the Engine Oil Life System has not reset. Repeat the procedure.
Good luck and thanks for your question and I hope my suggestions help. burdfrenzy
Visit My eBay Store!
http://stores.ebay.com/Pittsburgh-Joes-Pants-Nat

Jan 03, 2011 | 2008 Chevrolet Impala

2 Answers

I change the oil keep saying need oil change


on a 2001 gm i believe you turn the ingition to the run position with the engine off and with-in 3 seconds step on gas pedal 3 times all the way to the floor. the message center should reset and go off. turn key off and then start car. to see if reset.sometimes you have to go slow 3 times to floor with gas pedal.MAKE SURE ENGINE IS NOT RUNNING WHEN YOU DO THE RESET.

Aug 17, 2010 | 2001 Chevrolet Venture

2 Answers

Reset change oil light


hello, here is the instructions on how to reset the light

When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A CHANGE ENGINE OIL SOON message will come on. Change the engine oil as soon as possible within the next 600 miles (1000 km). It is possible that, if driving under the best conditions, the oil life may not indicate that an oil change is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset.
If the system is ever reset accidentally, change the engine oil at 3000 miles (5000 km) since last oil change.
To reset the Engine Oil Life System, do the following:
  1. Turn the ignition to ON, with the engine off.
  2. Slowly fully press and release the accelerator pedal 3 times within 5 seconds.
  3. The reset is complete when the chimes sound and the CHANGE OIL lamp goes out. If the lamp stays on and no chime is heard, repeat the reset procedure.
  4. Turn the key to OFF.
If the CHANGE OIL lamp comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

Jun 20, 2010 | 2001 Pontiac Grand Am SE

2 Answers

How do i reset the oil change indicator on a chrysler town and country?


press the step button in the display then select yes or no

Mar 01, 2010 | 2008 Lincoln Navigator

1 Answer

Oil change reset 2005 explorer


  1. Press and release the SETUP button until the message center displays PRESS RESET AT OIL CHANGE.
  2. Press and release the RESET button until the message center displays HOLD RESET TO CONFIRM.
  3. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.

Mar 26, 2009 | 2006 Ford Explorer

1 Answer

I have a 2005 Venture and have not been able to reset the change engine oil light. After repeatedly pressing the trip/reset button for 2 minutes the message center was still flashing change engine oil and...


Notes ENGINE OIL LIFE SYSTEM

HOW TO RESET THE ENGINE OIL LIFE SYSTEM
The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a "CHANGE ENGINE OIL" message being turned on, reset the system.

  1. With the ignition key in "RUN" but the engine off, repeatedly push the trip/reset button until "OIL" is displayed on the Driver Information Center (DIC).
  2. Once "OIL" is displayed, push and hold the trip/reset button for five seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
  3. Turn the key to "OFF". If the "CHANGE ENGINE OIL" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
If this does not work you may have a problem with your instrument cluster.

Mar 22, 2009 | 2005 Chevrolet Venture

1 Answer

2008 yukon first oil change


THE OIL PAN IS GOING TO BE THE LARGEST PAN AT THE BOTTOM OF THE ENGINE. THERE WILL BE ONLY ONE PLUG ON IT. TO RESET THE OIL CHANGE REMINDER FOLLOW THESE STEPS. TURN THE KEY TO THE ON POSITION, BUT DO NOT START THE VEHICLE. WHILE THE KEY IS ON PUSH THE ACCELERATOR PEDAL ALL THE WAY TO THE FLOOR THREE TIMES. THIS WILL RESET THE OIL REMINDER.

Jan 24, 2009 | 2008 GMC Yukon

2 Answers

To reset the change engine oil indicator


Owners manual should have the info you need to reset it

Dec 12, 2008 | 1999 Chrysler 300M

Not finding what you are looking for?
2008 Lincoln Navigator Logo

1,794 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...