Question about 2005 Chrysler PT Cruiser

2 Answers

Hi, I have a 2002 PT Cruiser - my rear turn signal will not blink - the front does, however - I have changed the bulbs in the rear light and still no results. The brake light works fine though. Could this be a fuse and which one should I look for and how do I identify the problem? Thanks so much, Dave C.

Posted by on

  • bonbons Feb 11, 2009

    i have a 2005 pt cruiser. on the drivers side my turning signal goes of and on really fast. i dont have no signals on the outside of the car. could it be that i need to replace the car with new bulbs. thank you

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same issue with my 02 cruiser. Fuse is the same for front and back thats not the issue. If you changed out with correct bulb, then its probably the same problem I have. The socket is out and needs replaced, however if you find who sells just the socket without the whole stinkin harness let me know! ;x

Posted on Feb 20, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

Make sure when you change the bulbs in the rear is same type (watt,ampere,or size) with the original. if the problem still continue..replace it from the front see what happend i think it will solve the problem

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 pt cruiser--no brake lights--have tail lights--replaced brake light switch 3 times--brake lights work for about a week--ideas?


I would like to know if you have turn signals working in the rear. These are the same bulbs that brake lights use. If you don't have turn signals, then you need to replace the bulbs. If you do, then there is probably a wiring issue, or a circurt breaker problem. Hope this helps?

Aug 20, 2014 | 2002 Chrysler PT Cruiser

1 Answer

Right turn signal


check that you have used the correct bulb for replacement as some bulbs have 2 connections and some have 1 and are not interchangeable.

Jan 09, 2014 | 2010 Chrysler PT Cruiser

1 Answer

2005 pt cruiser signal blinks fast for right turn, bulb not burned out but will not turn on


see that you don't have the wrong bulb installed; if the socket is for a double filament bulb and you install a single filament bulb (and vice versa) it creates such problems. check the connections at the sockets

Mar 14, 2013 | 2005 Chrysler PT Cruiser

1 Answer

My Turn Led Signal Can Not Blink


The LED lamps are not plug-in replacements for incandescent ones because they place a much lower load on the flasher.

Mar 07, 2017 | 1994 Mercedes-Benz C-Class

1 Answer

Pt cruiser tail lights front light & driverds door wont open


The headlight, brake and turn signal all run out of the turn signal switch. this is what causing you to loose those items. the door is a clip that has broken inside the door that goes to the handle, you will have to take the door panel off to find the rod that is hanging

Jun 14, 2010 | 2006 Chrysler PT Cruiser

1 Answer

Driver front turn signal does not blink. front


This may have more then one bulb in the front or possibly a bad socket try wiggling the new bulb in the socket to see if it will work.Compare all turn signal lights that come on the passenger side to those drivers side.Some vehicles also incorporate sidemarker lights with the turn signals.

May 29, 2010 | 2001 Pontiac Aztek

3 Answers

How do I get to the front turn signal bulb on a 2001 PT Cruiser?


Being that I am not a member of the Fixya Team, I would have to charge you for my Premium soultion to solving this PT Cruiser problem.

Sep 30, 2009 | 2001 Chrysler PT Cruiser

1 Answer

BURNING THE REAR SIGNAL LIGHT BULB EVERY 3 OR 4


I bump into the same problem wrong brake light bulb
try 3157LL . See if you have this brake bulb number

If this is not the case replace the bulb plug (pig tail).
Call dealership for this part
I see this problem before also.

Let me know if this help....

Sep 29, 2009 | 2003 Chrysler PT Cruiser

1 Answer

2006 pt cruiser on drivers side rear turn signal


The turn signals flash depends on each and every bulb working correctly. When one bulb fails, you will notice a change in the flash frequency, as you describe.

Replace or repair the bulb that is not working, and you should be good to go.

Doc

Sep 14, 2009 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
2005 Chrysler PT Cruiser Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...