Question about 1994 Dodge Dakota Club Cab

1 Answer

Remove broken glass and replace 94 dodge dakota

Took panel off and only three holes trying to save money am single mom and mechanically inclined with assistance....HELP PLEASE!!!!!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Well I no your single mom you need glass go to a auto body shop 44.00 an hour ask for a salvage glass for vehicle and your looking at 88.00 plus the cost of glass and maybe you can get the glass for 50.00 Please rate my response
The only reason why I say this its pretty tough to navigate and put the glass in and then bolt it up

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install quarter window that flips out on 2003 dodge Dakota. 2 door.right side


REMOVAL

(1) Remove quarter trim panel.

(2) Remove the bolts attaching the latch to the cab


side panel.



(3) Remove the nuts attaching the frame/hinge to

the B-pillar.

(4) Remove the glass from the cab.
(5) If necessary, remove the latch from the glass.

INSTALLATION

(1) If removed, install the latch to the glass.

(2) Center the window glass at the opening, insert

the hinge studs in the B-pillar holes, and install the

nuts.

(3) Attach the latch to the rear side panel with the

bolts. Tighten the bolts with the latch in the lock

position and pushing rearward on the latch.

(4) Test the vent window for water leaks.
(5) Install quarter trim panel.

INSTALLATION

(1) If removed, install the latch to the glass.

(2) Center the window glass at the opening, insert

the hinge studs in the B-pillar holes, and install the

nuts.

(3) Attach the latch to the rear side panel with the

bolts. Tighten the bolts with the latch in the lock

position and pushing rearward on the latch.

(4) Test the vent window for water leaks.
(5) Install quarter trim panel.

Oct 02, 2016 | 2003 Dodge Dakota

1 Answer

How to replace driver's side window on a 1987 dodge dakota


you need to remove the inner door panel and unbolt the glass from the regulator

Aug 22, 2012 | 1987 Dodge Dakota

1 Answer

Gas meter doesnt work on my 1991 dodge dakota. how to fix without having to replace the whole cluster


You remove the fuel tank & replace the sending unit

Too old-- live with it,save your money

Aug 11, 2011 | 1991 Dodge Dakota

1 Answer

I need a left front door/window schematic on line for a 99 Dodge Durango. I need to see how to put it together.


Front Door
  1. Remove the door trim panel.
  2. Remove the water dam.
  3. Remove the inner and outer door belt weatherstrips.
  4. Lower the window to the full down position and align the glass regulator arm with the access holes in the inner door panel.
  5. Remove the front glass run channel.
  6. Remove the nuts attaching the glass channel to regulator arm.
  7. Separate the glass and lift it up and out.
  8. Disengage the power window motor wire connector from the door harness, if equipped.
  9. Loosen the bolts in slotted holes attaching regulator to door inner panel.
  10. Remove the bolts attaching window regulator to inner door panel.
  11. Remove the regulator through the access hole in the inner door panel.
  12. Installation is the reverse of removal. Tighten the nuts attaching the glass to the lift plate to 7 ft. lbs. (9 Nm).
3455a81.gif
Power window regulator mounting—Dakota, Durango

6125789.gif
Window regulator removal—Dakota, Durango

Posting more on next post for door panel removal and installation.

Oct 26, 2009 | 1999 Dodge Durango

2 Answers

How do you remove the rear glass on a 1997 dodge dakota. I am in need of replacing my broken glass.


You can start by pulling the interior back by the rear window. There are two tabs on both ends on the bottom frame, you can bend them straight.Try to pull the bottom of the window out and watch out for the hinges to carefully lift up the window itself.

Sep 24, 2009 | 1997 Dodge Dakota

2 Answers

How do you install a window regulator for a 2001 dodge dakota?


well first take off the door panel it shouldnt be hard remove plastic cover off door.Make sure your window is all the ways up before you remove the motor.you can hold it up with duct tape or anything similar.Then remove the screw that go to the regulator sometimes it has rivets wich have to be drilled off.The new regulator should come with screws if it has rivets if not u use the same old screws.Also unplug the harness of it . Install new one,screw it on and reverse the procedure.Any problems keep me posted

May 23, 2009 | 2001 Dodge Dakota

1 Answer

Is front drivers side wheel bearing hard to replace on 4.7 2001 dodge dakota 4x4


depends on what you mean by "hard" if your mechanically inclined no, if you aren't, yes. You will need to remove the tire, the brake assembly and then get a large (32 or 34mm probably) socket to take off the spindle nut, I think on the dakota you have to remove the ball joint with a ball joint separator, remove the bearing assembly from the half shaft. (standard procedure on most vehicles) Hope this helps!

May 12, 2009 | Dodge Dakota Cars & Trucks

1 Answer

Broken rear slideing glass window on a dodge dakota 2001.


on this truck the rear window is glued in with urethane, if I was cutting it out I would use a special power tool designed to do this. I am sorry but this will not be easy with out it, the only thing I could see is you bending and cut the frame off with a scraper and hammer. (bad picture in my mind) might be worth a stop at an auto glass shop and ask them to remove.

Feb 27, 2009 | 2001 Dodge Dakota

1 Answer

94 Dakota 3.9 L v6


I had a similar problem only I was lucky enough that my gas gauge started working after it got lower than a 1/2 tank. It ended up being the float inside the tank. I ended up paying around $90 for the fuel float and it started reading the gas level correctly. But after 2 weeks and some severe cold weather, my engine wouldn't recieve any gas, ended up being the fuel pump. In buying the new fuel pump, along came a new float attached. So if your planning on replacing the float, go ahead and replace the whole pump, it will save you time, money, and hassle after its all over with.

Sep 28, 2008 | 1994 Dodge Dakota Club Cab

2 Answers

Replacing window regulator


You can buy the plastic clips from the dealer, break the old ones, there is no tool that I remember using, in fact I don't remember having any problem, are you sure the regulator is at fault? why not just replace the motor?

Aug 25, 2008 | 2003 Dodge Caravan

Not finding what you are looking for?
1994 Dodge Dakota Club Cab Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...