When I push the power door lock it wont lock the doors, however it makes a noise like its locking. The only way I can lock the doors is by using the key in the drivers door. Any help would be appreciated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check inside of door where wiring comes thru for broken wires ,ECU doesn't control windows or door locks. You didn't state what model vehicle you own. But opening and closing door on drivers side causes broken wires on numerous vehicles over the years, most makes and models. Split boot and check all wires inside for breakage.
I believe you are on the right track. It sounds like you have a faulty door lock actuator. ( they typically make a buzzing/grinding type of noise). You will have to remove the door panel to replace that component and a quick call to an auto parts supplier should be able to get you one. Good Luck.
No there is not many problems with this car at all. In fact it has very good ratings. This car may just have a bad electrical connection to the lock mechanism behind the door panel. You can push down drivers lock and then hit all door lock button and it should work no problem. You then can use remote to unlock all doors.