Question about 1992 Daihatsu Charade

1 Answer

Need to set timming for dauhatsu charade g200

I have it top dead center but unshaw on what to do next as iv been unable to find any manual or timming diagrams

Posted by on

  • 1 more comment 
  • zac_smum Feb 02, 2009

    valve timming

  • zac_smum Feb 02, 2009

    1994 g200 emgine

  • ChasDaihard May 11, 2010

    What timing - ignition or valve?

    What engine?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 98 Answers

So it's a 1.3 litre four cylinder like this?

If so does this help:need to set timming for dauhatsu charade g200 - 079b5c3.jpg

Posted on Feb 03, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2007 2.4L G6 top dead center diagram

TDC (Top Dead Center) means that Cylinder 1 is at its highest point (as observed through the spark plug hole), and the alignment tic-mark on your vibration damper is pointing at the "0" on the timing graticule.

May 21, 2015 | Cars & Trucks

1 Answer

I need a diagram of where the front main seal is on a 93 2.5 4cyl dodge caravan 5 speed ive been told I just need to pull a pulley and the seal should be right there

you do have to take of that pully also the timming cover timming belt timming gear but first you have to put the engine to top dead center on time beafor you do all that ok good luck

Sep 07, 2013 | 1993 Dodge Caravan

1 Answer

Timming marks diagram for suzuki vitara v6 engine

get #1 piston on top dead center and exhaust cam so valves are closed ,get intake valves open

Jan 14, 2013 | 1999 Suzuki Vitara

1 Answer

I need the timming specs in my 1966 buick riviera its got a 425 nailhead single 4.

The spark plug type is 44S and the gap is .032. The ignition points should be set at a 30 degree dwell angle or a .016 point gap. The ignition timing should be set at 2-1/2 to 3 degrees before top dead center, and the engine compression should be 170 psi. Let me know if you require a firing order diagram or any further assistance.

Aug 24, 2010 | Buick Riviera Cars & Trucks

1 Answer

How to put timming belt on 1996 acura tl 2.5

I recommend you get the Haynes Repair manual for your vehicle from the Local Auto Parts store. It will tell you how to set the #1 cylinder to Top Dead Center on the compression stroke and how to align the timing marks so the engine is in time like it should be.

Jun 25, 2010 | 1996 Acura TL Series

1 Answer

Engine running on and no the ignition timming is out i have a timming light and just wanted to no what degree it should be set to its a 1800 mk1 golf cabriolet

6 Degrees Before top dead center *Set at warm idle speed (925 RPM) *Distributor vacuum hose disconnected & plugged *Transmission in neutral (parking brake engaged)

Jan 29, 2010 | 1990 Volkswagen Golf

1 Answer

Need to set timing on 1990 chevy pu 5.7 engine "K" ?

set cylinder 1 to top dead center then set the distributer to the #1 wire contact, snug down the distributor and start the engine, then hit the crank dampener with a timming light while clipped to the #1 spark plug wire and turn the distributor till the timming light is showing 0 on the crank, then tighted it down and timming is set.

Dec 11, 2008 | 1990 GMC K2500

1 Answer


With the timming marks lined up make sure that cylinder 1 is at top dead center on the compresion stroke, then as you lower the distributer back in make sure that the rotor is pointing to the number 1 plug wire post on the distributor cap,mark the distributor where the #1 post is since you can't install it with the cap on.

Aug 29, 2008 | 1991 Toyota Corolla

2 Answers

Timming problems

4 cylinder or v-6? Try and get the book on your vehicle and follow the instructions. Haynes Manual #47017 Worked for me...

Aug 21, 2008 | 1996 Isuzu Rodeo

Not finding what you are looking for?
1992 Daihatsu Charade Logo

Related Topics:

1,453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

77499 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides