Question about 1999 Cadillac DeVille

1 Answer

What year of caddy this goes on waterpump housing crossover GM part#12553133

I have 99delagance need waterpump housing crossover witch GM part fit my car. GM part #12553133 or12555572 please help

Posted by on

  •  Stephen
    Stephen Jan 28, 2013

    Any GM dealer parts dept should be able to tell you.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cadillac Master
  • 14,162 Answers

The Internet has a large number of web sites
where you can buy service manuals and schematics
from bookstores, publishers, and other collectors.

Factory Auto manuals
http://www.factoryautomanuals.com/
search for : factory service auto repair manuals

Repair Service auto Manuals
where to buy Factory Service Auto Repair manuals
http://www.repairservicemanuals.com/
the largest collection of Automotive Repair Service
Manuals and Owners Guides on the internet. Our
database currently holds over 54,000 entries dating
back from 1940 to more recent 2011.

Chilton Repair and Service Manuals
http://www.chilton.cengage.com/

Haynes Repair and Service Manuals
http://www.haynes.com/

Free Auto Service and Repair Manuals
http://free-auto-repair-manuals.com/

http://cars.lovetoknow.com/Free_Car_Repair_Manual


http://www.realworldautomotive.com/

https://www.2carpros.com/

Posted on Jan 25, 2016

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 5370 Answers

SOURCE: Water pump crossover housing gasket

For water pump replacement i suggest you to check the help link provided below.

click the link below :----

Water pump replacing procedure for all vehicles?

http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html
---------

HOW TO REPLACE A WATER PUMP

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

------------------
How to route Water Pump Belt for 1992 Oldsmobile ?

http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

---------
How to replace Water Pump on Car ?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

---------
How to Remove Water Pump?

http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

-------
Where is Water Pump located ?

http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html

-----------

This will help. Thanks.

Posted on Feb 25, 2012

gjsmitty634
  • 13 Answers

SOURCE: my car overheats,ichanged everything but the engine

What kind of vehicle. Timing out of adjustment can cause overheating issues.

Posted on Sep 28, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not locate the right fuel pressure regulator for my 1990 caddy allante 4.5l can you help?


check with GM spares shops as the regulator may have been upgraded to what you had
AS long as it fits , with the right fittings and the right pressure settings , the shape of it will make no difference to the operation

Jan 27, 2016 | 1990 Cadillac Allante

1 Answer

Where is the thermostat located on 1997 Olds achieva?


If you have the 3100 v6 engine, the thermostat is located behind an aluminum housing behind the exhaust crossover tube almost directly below the throttle body. If you have the 2.4 dohc engine, it is under a steel housing on top of the waterpump which is underneath the exhaust manifold on the back side of the engine.

Aug 18, 2011 | 1997 Oldsmobile Achieva

1 Answer

Remove thermostat


Thermostat Removal & Installation To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Partially drain the coolant, (until the level is below the thermostat).
  3. Remove or disconnect the following:
    • The air cleaner and duct assembly
    • The crossover exhaust pipe
    • The radiator hose from the thermostat housing
    • The thermostat housing bolts
    • Any remaining sealer from the bolt threads gm_mv_ven_tstat.gif

    • The thermostat housing
    • The gasket
    • The thermostat
To Install:
  1. Install or connect the following:
    • The thermostat
    • The thermostat housing
    • The gasket NOTE: Apply RTV sealer, GM P/N 1052366 or the equivalent, to the thermostat housing bolt threads.
    • The thermostat housing bolts
      1. Torque to: 18 ft. lbs. (25 Nm)
    • The radiator hose to the thermostat housing
    • The crossover exhaust pipe
    • The air cleaner and duct assembly
    • The coolant
  2. Thoroughly inspect the cooling system for leaks.
prev.gif next.gif

Dec 15, 2010 | 2005 Pontiac Montana

1 Answer

Change theromstat 2003 chevy venture


Thermostat Removal & Installation To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Partially drain the coolant, (until the level is below the thermostat).
  3. Remove or disconnect the following:
    • The air cleaner and duct assembly
    • The crossover exhaust pipe
    • The radiator hose from the thermostat housing
    • The thermostat housing bolts
    • Any remaining sealer from the bolt threads gm_mv_ven_tstat.gif

    • The thermostat housing
    • The gasket
    • The thermostat
To Install:
  1. Install or connect the following:
    • The thermostat
    • The thermostat housing
    • The gasket NOTE: Apply RTV sealer, GM P/N 1052366 or the equivalent, to the thermostat housing bolt threads.
    • The thermostat housing bolts
      1. Torque to: 18 ft. lbs. (25 Nm)
    • The radiator hose to the thermostat housing
    • The crossover exhaust pipe
    • The air cleaner and duct assembly
    • The coolant
  2. Thoroughly inspect the cooling system for leaks.
prev.gif next.gif

Nov 05, 2010 | 2004 Chevrolet Venture Passanger

2 Answers

Where is the thermostat located in a 1999 chevy monte carlo 3.1 and is there a diagram I can see to see if I can fix the car my self. Thanks Shirley


the thermostant is behind the exhaust crossover pipe, this is the pipe that connects the front exhaust manifold to the rear, the housing is behind that, its a tight fit,also if you follow the upper radiator hose from the radiator to engine the housing that the hose goes to is where the thermostant goes,heres a diagram, hope this helps,

May 20, 2010 | 1999 Chevrolet Monte Carlo

2 Answers

Where is the thermostat located


This is the thermostat housing:


80614b5.jpg
The thermostat sits inside of it...which looks like this:


9efca1e.jpg
These are the steps to remove and replace the thermostat:

3.4L Engine
  1. Drain the cooling system.
  2. Remove the air cleaner.
  3. Remove exhaust crossover pipe.
  4. Disconnect the surge tank line fitting from the coolant outlet.
  5. Remove the thermostat housing to intake manifold bolts.
  6. Remove the thermostat housing outlet and thermostat
  7. Clean the mating surfaces.
To install:
  1. Install the thermostat and housing outlet.
  2. Install the thermostat housing bolts. Tighten the thermostat housing bolts to 18 ft. lbs. (25 Nm).
  3. Install exhaust crossover pipe.
  4. Connect the surge tank line fitting to the coolant outlet. Tighten the fittings to 15 ft. lbs. (21 Nm).
  5. Install the air cleaner.
  6. Fill the cooling system.
  7. Inspect the system for leaks.

May 06, 2010 | 2000 Pontiac Grand Am GT

1 Answer

Temp gauge does not move. Heat works. No Coolant leaks. Coolant level appears normal.


your thermostat is bad

heres how to fix it

  1. Drain the cooling system.
  2. Remove the air cleaner.
  3. Remove exhaust crossover pipe.
  4. Disconnect the surge tank line fitting from the coolant outlet.
  5. Remove the thermostat housing to intake manifold bolts.
  6. Remove the thermostat housing outlet and thermostat
  7. Clean the mating surfaces.

To install:
  1. Install the thermostat and housing outlet.
  2. Install the thermostat housing bolts. Tighten the thermostat housing bolts to 18 ft. lbs. (25 Nm).
  3. Install exhaust crossover pipe.
  4. Connect the surge tank line fitting to the coolant outlet. Tighten the fittings to 15 ft. lbs. (21 Nm).
  5. Install the air cleaner.
  6. Fill the cooling system.
  7. Inspect the system for leaks.

Jan 23, 2010 | 2001 Oldsmobile Alero

1 Answer

Where is the thermostat located on a pontiac grand am 2004 v6 3400


3.4L Engine

  1. Drain the cooling system.
  2. Remove the air cleaner.
  3. Remove exhaust crossover pipe.
  4. Disconnect the surge tank line fitting from the coolant outlet.
  5. Remove the thermostat housing to intake manifold bolts.
  6. Remove the thermostat housing outlet and thermostat
  7. Clean the mating surfaces.

To install:
  1. Install the thermostat and housing outlet.
  2. Install the thermostat housing bolts. Tighten the thermostat housing bolts to 18 ft. lbs. (25 Nm).
  3. Install exhaust crossover pipe.
  4. Connect the surge tank line fitting to the coolant outlet. Tighten the fittings to 15 ft. lbs. (21 Nm).
  5. Install the air cleaner.
  6. Fill the cooling system.
  7. Inspect the system for leaks.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Nov 23, 2009 | 2002 Pontiac Grand Am

2 Answers

Cant find right water pump


Water Pump
This pump fits a 6.5 n/a civilian and millitary HMMWV. Ref 94 Suburban AC Delco 251-589 (Needs Heater 5/8" Nipple 12339396) $120.00
GM part number for 1995 6.5 N/a is 88894044. The AMG part number is 5743241
Pump for a 6.2 n/a is 12534418

Water Pump Backing Plate - AMG 5743232 $96.00
1998 Stud-type water pump pulley amg# 6006809 37.72, gm #12556143.
8 blade fan 6009790 222.81, stud mounted fan clutch for this fan 6009791 153.78
Try these: 96-98 Fan clutch GMC G30 6.5 TD
ACDelco#15-4680
GM#15028400
1999 and up
big-nut fan clutch 6009991, big nut water pump amg#5745093, ac delco# 251-603.
waterpump_fanclutch.jpg The 6.2 and the 6.5 waterpump do share the same basic casting. However, the pump rotors inside the pump are reversed between the two. This due to reversed direction of rotation from V belt to serpentine belt. DO NOT fit a 6.5 pump on a 6.2 or vice versa. If you do, it will not pump water!!!
Thank you , Quinn

Aug 22, 2009 | 1994 GMC Sierra

1 Answer

I am working on 1993 Cadillac Eldorado. Need to know if thermostat bypass is part of thermostat? The bypass outlet is a part of the housing for the thermostat. I have replaced the thermostat.... a few...


Remove the radiator and have it boiled out to clean it. All those years of GM sealing tabs used for coolant repairs have taken a toll. Hope this helps

May 02, 2009 | 1989 Cadillac Eldorado

Not finding what you are looking for?
1999 Cadillac DeVille Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...