Question about 2005 Chrysler Pacifica

1 Answer

Windshiel wipers never done it before....can someone that has give me a hand

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

If you are looking to change the wipers in the middle of the wiper their is a hookwith a clip that holds it on/ Flip the wiper up straight get aflat head screw driver to push in the little clip and slide down should come right out then just slide the new one in/ please rate my response thank you very much

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get wiper arm to go to edge of windshiels


At the bottom of the wiper arm lift the cover, you will see the nut that holds the wiper arm on just undo and wiggle the arm off replace about four splines up then refit, If not enough just undo again and move up another few splines.

Mar 16, 2013 | 2005 Fiat Punto 1.2

1 Answer

The passenger side windshield does not work. how do you fix or change out the windshied wiper, it is bent a little?


remove the windshiel wiper and see if it is moveing freely the wiper may be striped try a new wiper

Aug 24, 2010 | 2007 Toyota Sienna

1 Answer

WINDSHIELD WIPERS STILL ON ALL THE TIME


Look for the fuse/relay in fuse box. If you still have no luck you have to disconnect the switch in the vehicle.
The problem is either the switch , relay or circuit is shorted.

May 12, 2010 | 2000 Dodge Caravan

1 Answer

My windshield wipers wont stay down in the base of the windshiels, how do I fix this?


the switch has failed in the "park" circuitry..need new switch, or clean it with electrical contact cleaner you'd find at radio shack. take the switch by the hand and work it back an forth to see if you can clean up the bad spot.
it a 50/50 shot that you might fix it...mines doing the same thing but i just have to wait about 5 minutes and then the finally go to the park position, but it goes very slowly..thats whats to be expected out of a 22 year old Classic.

May 09, 2010 | 2007 Saab 9-3 Aero Convertible

2 Answers

Washer motor runs but no water on windshiel


Pump could be blocked with gunge, remove it and clean out.

Apr 25, 2010 | Hyundai Motor 2002 Sonata

1 Answer

I have a 2005 chrysler town and country. My


SOUNDS LIKE YOU HAVE A MULTIFUCTION SWITCH CAUSING YOR PROBLEM..SWITCH SENDS SIGNAL FOR BOTH WIPERS AND TURN SIGNALS..FAIRLY EASY TO REPLACE..LET ME KNOW IF YOU NEED MORE INFO

Mar 16, 2010 | 1997 Dodge Caravan

2 Answers

1999 plymouth voyager front windshield wipers not working proper


Sure pull the cover off the arm at the base(by the bottom of the windshiel) under that you will find a bolt. Unbolt the arm and pull it off then adjust both arms so that they do not entangle at the high point. You can turn on the wipers and when they reach the high end quickly shut off ignition they will stop at this position so you can adjust them, This is what we would do at the shop for about 200 bucks. Take your time and be sure to tighten everything up when you're don and you will do great. Have fun.

Nov 29, 2008 | 1999 Plymouth Voyager

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...