Question about 1992 Honda Prelude

1 Answer

I hear a clicking noise when i make a turn

I just bought a prelude of the street for 1500 hundred theres nothing really wrong wit it but just this clicking noise that i hear when i make a turn either right or left. The noise only seems to happen when i push on the gas the most. even at like 1mph. and most of the time i dont hear it when i am not pressing the gas. Sometimes i hear it but not as bad as if i were to push on the gas,,.... =) can an1 help me plzzz.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

You need to replace both front axles.

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a pontiac g5 gt 2008. I just got it and its gm certified. I noticed that when i turn or am traveling on gravel there is a noise inside the steering. I don't know how to explain it best, maybe a...


traveling on gravel roads vechicle make all kinds noise due to vibrations.if you only hear noise on gravel road not much wrong if you hear noises all the time you have problem.

Aug 11, 2013 | 2008 Pontiac G5 GT

1 Answer

When it rains my dodge ram 1500 will stall. After awhile of sitting it runs again. Aside from this I hear a water noise coming from under the dash in the cab like it in the AC, Heater or Vacuum hoses. I...


my 98 has the same water noise. i went to a well established garage and asked the owner. he and his brother both have rams and have the same noise. i guess its a ram thing. its coming from the heater core. they said its nothing to worry about. his done it since he bought it 6 years ago

Dec 24, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

I just bought a 93 prelude with the 2.3l vtec the guy said that the engine was just rebuilt it has the dohc engine the valves are clicking he told me to run the car so the valves will seat??? then he...


not really. The engine uses hydraulic lash adjusters, so there is nothing for him to adjust. If the engine has been run at all, the valves should be seated. If not, maybe the guides were over-knurled. Can't really tell why they are clicking. Can he provide specifics of what was done to the engine? Does it have new lash adjusters? Were the guides knurled or what was done with the guides? What was done to the valves? Are the springs new? Are the camshafts new? etc. etc.

Nov 26, 2010 | Honda Prelude Cars & Trucks

1 Answer

1985 Honda Prelude replaced alternator and regulator trouble shooting wires, battery light still comes on


I had an 84 Prelude with a similar problem. I will assume that the car runs just fine as though there is nothing wrong but has the light on. When this happened to me it was just a bad diode in the alternator. If the battery takes a load fine and shows good charge then take off the alternator, take it back to autozone or wherever you bought it and have them test it. I would bet there is a diode bad and they will give you a replacement. Good luck!

Jan 10, 2010 | 1985 Honda Prelude

2 Answers

My front end is making very loud noises every time


same thing thats wrong wth mine ur bushings r bad. replace ur upper and lower ball joint and dont no proper name 4 it but outer tie rod goes to bushing on wheel change it.thats what im trying to figure out how to change.good luck

Jan 07, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

My z28 camaro wont start i think it has something to do wit alarm


be more specific... won't turn over, turn over but won't start, do you hear a clicking noise?

Apr 30, 2009 | Chevrolet Camaro Cars & Trucks

1 Answer

WHEN I TURN THE IGNITION I CAN HEAR A CLICK SOUND BUT NOTHING ELSE AS IF ITS TRYING TO SEND POWER TO THE SPARK PLUGS OR WTHVER EVERY THING WORKS JUST WONT ATTEMPT TO TURN OVER


if it clicks when you try to start it might be the battery.
Turn on the lights and try to start.. and see if they dim out,
if so replace or charge the battery KC

Apr 06, 2009 | 1993 Honda Prelude

1 Answer

Axel


Usually the indication is around corners the CV joint will make a popping sound. You can also tear the boot on the CV joint, but my theory is just to drive it until it makes noise. No sense in changing it when there is still life in the old one.
Really the only thing that goes wrong is the CV joint portion of the shaft wears out, except accidents and other unforeseen instances.
You can buy lifetime warranty axle shafts from Auto Zone or Advance and those kinds of parts stores.

Feb 11, 2009 | 1991 Honda Prelude

2 Answers

1989 Honda prelude makes a clicking noise when turning


Sounds like it an outer cv joint on that side. They start making a ticking noise under load and it gets worse as time goes on. Have a shop look it.You'll need a pretty well stocked tool box if you want to do it yourself.

Nov 29, 2008 | 1988 Honda Prelude

Not finding what you are looking for?
1992 Honda Prelude Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...