Question about 1999 GMC Jimmy

1 Answer

Jimmy 1999 turning light sound.

The ticking sound that goes on when the signal lights are in use will not go off. The turning signals still work as they should but the sound won't stop ticking. Oddly enough it seems to be connected with the brakes somehow. When I step on the brakes they stop, but then start again when I release the pressure on the brakes.
Help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

The turning swich is shorting out in the string colum needs to be fixed as soon as posble could make things a lot more bad'''''' but you can look at and see if their is a relay in the fuse box for the blickers' their is two of them'' one is for that and the other is for your 4 way flasher'' thats your hazrs when you brake down on the hiway they look almost just a like in some models''' and on some they are out under the hood in a box and it will say flashers''''' but turn on your hazers and see if they work fine or not some one could have changed them and put the wrong one in the wrong plase so try that''' i hope this helps let me know''' my name is james - you can e-mail me back at '' jay_win2002@yahoo.com.

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake lights wont work unless turn signal is on


Wild guess, crossed wires, bad printed circut film connector in tail lights, bad ground connection to the same film. Otherwise, wiring problems up front. signial/ break circuts.

Mar 04, 2015 | 1999 GMC Jimmy

1 Answer

1999 jimmy no dash light and signal indicators on


Usually a ground problem - - the lights that are on are grounding thru the cluster.

Jul 03, 2012 | 1997 GMC Jimmy

1 Answer

No bake lights hazard lights or turn signals on 1996 MC Jimmy


The first place to start is with the fuses, make sure all fuses are good, then move on to the signal light switch, brake lights run through signal switch but this sounds like a fuse or the switch.

Jul 15, 2010 | 1996 GMC Jimmy

2 Answers

Turn signals dont work but bulbs work as flashers


your flasher element has gone out , it is on the fuse box read the cover and it will tell you which one it is replace

Aug 07, 2009 | 1995 GMC Jimmy

1 Answer

Right turn signal stays on will not flash left works.2001 jimmy


its your blinker box.. all major lights run through there

Aug 04, 2009 | 2001 GMC Jimmy

1 Answer

1999 Nissan Altima GXE Turn signal problem


you have a busted bulb, your hazard may be working fine but the bulb is double contact so one part is working and the other is not. just check which bulb is busted.

Apr 20, 2009 | 1999 Nissan Altima

1 Answer

Signal Lights - flasher...


Hi it sounds like the multifuntion switch
never had one on a monte carlo before but lots of grand am and malibu
hope this helps

Mar 23, 2009 | 2002 Chevrolet Monte Carlo

Not finding what you are looking for?
1999 GMC Jimmy Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...