Question about 2004 Chevrolet Astro

1 Answer

2004 chevy astro van back seat right door won't open

Re middle back seat row of seats -- the door on the right side of car (only door to that row of seats) will not open. Passenger was able to get into car and shut door. But when it was time to exit car, door would not open. Is there a history of this being a problem with the 2004 chevy astro minivan?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Not sure about your specific vehicle but i do know that in the winter, when a door closes, it grabs the pin in your doorjam like a lobster claw closes on a finger. if any moister is inside the mechinism, it can freeze very easily. also if you pull on the door handles tp try to open it...if the door handle moves freely, then you either bent or popped the rod that goes from the latch mechanism to the handles and you would have to take off the interior wall of the door to get to it and fix the rod or put it back...it used to happen to older cars allk the time.

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990 chevy astro van the door handle broke cant get door open cany ou help


You will need to manipulate the lock linkage from inside the door using car-thief type tools and expertise or by gaining access to the door internals by removing the interior trim panel from the door. It is not an easy task and might need the seat removing and even then the panel is likely to suffer damage.

Jun 26, 2016 | Cars & Trucks

1 Answer

The electric sliding door on my 2001 Chevy venture will not stay closed when the power switch is no


Both sides have their own modules. They are behind the panels right beside the middle seats. Remove the back seats (if you have third row seating) Pull the panel (they pop off). Either replace the module or disconnect it and manually open and close the side door.

Oct 10, 2014 | 2001 Chevrolet Venture

1 Answer

How to access my 2004 Mercedes E320 wagon's main battery?


Hi

my knowledge about W210 (Sedan) and S210 (wagon)

Not really sure if other modles got the same location.

Battery located under the Right Back Passenger seat.

for the seadan ... you may have to remove the back seat by pressing the corner bottoms in both sides then left it up and drag it to front to got it free... you will see the battery under it.
for the wagon... open the back right door and release the bottom seat by pressing the lock handle at the side of the seat up.... seat bottom will be cimi free to be lifted to front and then you will have free access to the battery.


if you just need to recharch the low battery... you can find the charging plugs under the hood to the left side ( +) will be covered with black plastic box... open it and connect the possitive cable (red)... ( - ) will be few inches front of that to be conected with nigative cable (black)

Jul 15, 2014 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

I have 2 bucket seats in the middle of my 2007 montana. can i take one out?


Yes of course you can remove the seat. There is a pull at the rear of the seat in the middle (down on the frame) The pull is a loop of material. You need to pull that up with solid force, this will release the lock so you can tilt your seat forwards. Once the seat is rotated forward enough, you will be able to lift the seat out.
I leave my seat out behind the drivers seat most of the time for easy access into the back and just putting stuff in the car. Also, the side clearance height is higher than the rear hatch height.

Apr 12, 2014 | 2007 Pontiac Montana

1 Answer

I have a old mercury villager ...i want to replace the middle row seat with last row seat ...is it posible...?


The middle row seat slides forward to the middle position (and several other positions as well.)

Owners manual explains how to slide rear seat foreard.
Remove middle row seats. Lift handle under 3rd row seat cushion on passenger side. Raise seat cushion up until it locks up. Then lift the lever on the passenger side of seat and pull seat forward until it locks in place.

if you don't have owner manual, go to motorcraft.com, pro center, tech info, owner manual.
join our group for free help.

please rate too. Thanks.

http://groups.yahoo.com/group/villagerquest/

Jan 24, 2011 | Mercury Villager Cars & Trucks

1 Answer

How are the middle row safety belts supposed to function properly? my used van is showing signs of character.


It depends on your seating. My Windstar has bucket seats, and the very back is a bench type 3 seater. The middle row normally has 2 shoulder/lap belts. It really depends on the perks that the original owner opted for upon purchase. For instance my driver seat has a button on the right side to adjust the lumbar area of the seat.
Checking CarFAX will let you know if the vehicle has ever been in a major accident. Most people do not realize that after an accident, seat belts and their anchors should be replaced.

Sep 23, 2010 | 2001 Ford Windstar

1 Answer

Help removing the third seat on my Suburban


first open your rear hatch/doors.2nd fold third seat over buy using latch on right side. 3rd pull relase handle in middle of seat on the back bottom . this unhooks the back latches. use the other hand to pull meatl bar up, tipping seat. 4th while holding metal bar with the one hand use the other hand to pull small release strap. it is too the right of the metal bar, this releases the front latches, pull rearward the seat moves out. the seat is heavy good luck

Dec 30, 2009 | 2004 Chevrolet Suburban

4 Answers

M y radio stopped working on my 2004 trail blazer


The 2004 Trailblazer has two fuse panels, one in the under hood and one under the middle row seats. The radio fuse is marked RADIO fuse # 41 and is a 15 amp fuse located in the rear fuse panel. To access the rear fuse panel flip the seat behind the driver to the upright position, under it you can see the fuse panel and a diagram should be on the under side of the cover. 

Good luck and hope this helps.

May 26, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

I need a picture on how the seat belts are configured in the back two bench seats. I removed the seats but forgot how the belts were configured.


the last one i done which was an astro van so i should imagine this one is similar,had two rear seats,the one directly the driver had the side door in so it was different in as much as it had two lap belts the back one only had one lap belt in the middle.the outer inertia belts are a three point fitting .If your still not sure then visit a scrapyard and have a look.This astro van was weird though because it had 9 places altogether but here in spain you can only carry 7 people without a public service driving licence

May 07, 2009 | 1991 GMC Safari

1 Answer

Middle row back seats...how can I remove or collapse them, I know back seats fold completely to floor, but what about middle row?


first fold them flat then pull the handle which will release the rear bottom brackets and allow you to pull back and lift the entire seat out of the van....both seats.

May 01, 2009 | 2001 Honda Odyssey

Not finding what you are looking for?
2004 Chevrolet Astro Logo

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...