Question about 1995 Saturn Sl

1 Answer

Wiper fuses My wipers stopped working and also the squirter. But the schematic for the fuse box doesn't show a wiper fuse.

Posted by on

  • Anonymous Mar 20, 2009

    My wipers stopped working,besides the fuse what else can go wrong? please help...thank you.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

There is a relay for the wipers check that it is in the engine compartmentcould be loose ground/ please rate my response thank you very much

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for the fuse for the wiper motor 2008 chevy impala


WPR fuse 25amp under hood fuse box .
Wiper/Washer System Components
The Wiper/Washer System consists of the following components:
• Windshield wiper/washer switch
• Body control module (BCM)
• Wiper PCB relay
• Wiper high PCB relay
• Windshield wiper motor
• Windshield washer fluid pump
• Windshield washer fluid level switch
• WPR fuse 25 A
• WSW fuse 10 A
This is more then likely not a fuse issue !!!!!!!
Low Speed Operation
When the wiper switch is in the low speed position, ground is applied through the switch internal resistor and the wiper switch low signal circuit to the body control module (BCM). In response to this signal, the BCM energizes the WIPER PCB relay by applying battery voltage through the wiper relay control circuit to the coil side of the relay. This allows battery positive voltage from the WPR fuse to flow through the switch input side of the WIPER PCB relay and out to the switch input side of the WIPER HIGH PCB relay. Since the wiper high relay is de-energized and its switch contacts are normally closed to the low speed control circuit of the windshield wiper motor, the motor will operate at low speed.
Wiper motor low speed operation and the wiper PCB relay can also be commanded ON/OFF by using a scan tool. Refer to Control Module References.
The PCB relays mentioned above are soldered right into the circuit board inside the fuse/relay block under the hood . There are alot of reasons for the wipers not to work ! The fuse could be blown but fuse's don't just blow for no good reason , short to ground , low resistance high current flow etc.... Intermittant !

Power and Grounds
With the ignition in the ON position, accessory voltage is supplied through the 25A WPR fuse to the WIPER PCB relay, the WIPER HIGH PCB relay and the WS WASH PCB relay that are all located in the underhood fuse block. Refer to Wiper/Washer Schematics.
G200 provides ground for the windshield wiper motor and the WIPER PCB relay. G100 provides ground for the windshield washer fluid pump and the windshield washer fluid level switch.

Dec 04, 2016 | Cars & Trucks

1 Answer

Buick enclave front wipers work only on high speed.


What year ? The relay's are located in the under hood fuse box .
With the ignition in the ON position, accessory voltage is supplied through the 25A WPR fuse to the WIPER relay, the WIPER HI relay and the WSH relay that are all located in the underhood fuse block. Refer to Wiper/Washer Schematics. Which wipers are you talking about ? Front or rear . Rear wiper fuse is in the I/P instrument panel fuse box .
Fuse Block - I/P
Under the lower right side of the instrument panel

Nov 19, 2016 | Buick Enclave Cars & Trucks

1 Answer

Wiper doesn't work


Check fuse in box,if good,then go to wiper motor,put meter to wires at wiper motor and turn on and see if you are getting power,if so,then motor is bad,if not maybe wiper switch.

Dec 24, 2012 | 2006 Dodge Charger

2 Answers

Winshield wipers arent working, already tried to change fuses is there more than one fuse box to check


did you check the wipers motor relay? is in the same fuse box in engine compartment.Thanks

Mar 28, 2011 | 2001 Ford Focus

1 Answer

Wiper motor stopped working. I need a wireing diagram for the wiper motor , switch and relay


Wiper motors usually do not have a relay, they are operated directly from the switch. Before you look at wiring, check the fuse, wiper motors are notoriously reliable and something like a switch will go long before the wiper motor. The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the wiper fuse it should be around 15 to 20 amps.

Mar 15, 2011 | Chevrolet Corvette Cars & Trucks

3 Answers

Whe wipers on my car do not work and neither do the squirters...what's wrong with it?


you could have a blown fuse pull the cover off the fuse box, that is located under the dash board on the driver side. inside the cover there is a diagram of which fuse is which. find the one for your wipers and check it, pull it out and inspect it visually its usually pretty obvious if its bad it will look burned out if the fuse looks intact, there may be another fuse in this circuit. if it's blown replace it and check if that worked if not, check the power to the wiper motor and washer fluid pump both have power then it could be a bad wiper control switch on the handle attached to the steering wheel.i hope this helps.

Mar 04, 2011 | 2000 Hyundai Sonata

1 Answer

Wiper blades stopped working on 2000 Taurus


  • Central junction box (CJB) Fuse 211 (15A), Fuse 215 (30A)
  • Multifunction switch
  • Wiper run/park relay
  • Wiper high/low relay
  • Windshield wiper motor
  • Circuitry
  • Battery junction box (BJB)
  • CJB
  • Generic electronic module (GEM)
-------------------------
42c55af.gif

Apr 09, 2009 | 2000 Ford Taurus

1 Answer

Wipers wont work


1.  Turn on your wipers and pop your hood.   2.  If you hear you wiper motor, then you do not need to check your fuses. 3.  If your wiper arms are moving freely, then your linkage from the wiper arms to the motor is disconnected and possibly broken.   4.  If the problem is electrical, do the following:      1.  Check the fuse, and check for power at the fuse.      2.  Check the wiper motor for ground. For a complete circuit, you need power going in and ground               coming out.  Check electrical connections for corrosion or poor connections.       3.  Get a wiring schematic and trace power to the wiper motor starting at the fuse box in the                       following order:           Fuse box           wiper switch           wiper motor      4.  In the rarest of cases a wiper motor or wiper switch is at fault.  I do not recommend replacing                 anything unless you have proof that the part is faulty. (ie. power going into the switch but nothing           coming out.)       

Dec 21, 2008 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...