Question about 1996 Mercury Grand Marquis

1 Answer

Passenger seat stuck in lying down position.

The seat will move back and forth but is stuck in reclining position

Posted by on

1 Answer

Use some penetrating lubricant on all pivot points and levers around the recline mechanism, and let the lubricant sit overnight. In the morning, try to work the recline mechanism free. (The vehicle is quite old at this point, and likely parts in the interior need lubrication. These parts should be lubricated annually.)

Posted on May 21, 2015

2 Suggested Answers

reisdos
  • 1297 Answers

SOURCE: power seat moves back and forth each time key

your seats have a MEMORY stored with each key

use your seat control button to reprogram the seat

however, you need to know if the key you have is the primary key or secondary

first program as driver one and then use the key
if seat moves then program as driver two


if however... you mean that the seat is always moving, AT ALL TIMES, and you ALWAYS have to readjust with the seat switch then you probably have a module concern

Posted on May 20, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1976 450SEL seat back is half way reclined and I can,t move it


Hi Charlie:
You may haave to resort to removing the seat so that you can turn it upside down to see how the mechanism works, an more importantly, what is not working.
No big deal to remove the seat.... unbolt from floor, unplug any electricals, Bob's your Uncle!

Sep 22, 2015 | Seat Cars & Trucks

1 Answer

Power seat won't slide back, black plug is hanging out


That is the seat heater plug most likely and you car is not equipped with that accessory. All cars come with the same wiring. Does the power seat switch have 12 volts present?

Mar 14, 2014 | 2002 Audi A6

1 Answer

Power (driver) seat won't recline; everything else works


I would first disconnect and recommended checking if something is tangled in the track and make sure plugs in good

Nov 22, 2013 | 1998 Toyota Avalon

1 Answer

Pasenger seat


Mark, try moving the seat back itself, rocking it back and forth whilst operating the tilt lever, you may need an extra hand

Aug 05, 2012 | Peugeot 307 Cars & Trucks

1 Answer

HONDA ACCORD Seats Front Assembly Recliner went down and won't go up


I wouldn't ruin anything by trying things yourself

I would have a dealer check it out

The dealer I used in the past, has a seat specialist come
in on Wed only, around 5:30 after the service bays close
& one service writer hangs out until that person fixes a
couple vehicles seat issues

Jun 12, 2012 | 1995 Honda Accord

2 Answers

My passenger seat won't lock into position. It slides back and forth as I drive and the bar that you pull on to move it back and forth is stuck in the up position.


There is a spring that pull's the handle back to lock position that might be broke or the locking mechanism might be gummed up.the spring can't be bought seperatly so check a hardware store or replace the seat track assembly.

Aug 11, 2009 | 2000 Chevrolet S-10

2 Answers

My front seat will not move forward. It will recline, move up and down but it will not move forward. I've tried reseting the seat positions but nothing seems to work. my seat wont move forward is there a...


You can move the drivers seat back by turning on the power, getting in the seat and position your feet firmly on the fron flor with your back firmly against he seatback, and then engage the switch pushing back - while pushing like hell with your feet. You can actually hear the seat drive shaft turning while the seat moves back. The principle should be the same for moving forward, but pressure would have to be aplide to the back of the seat.

Jun 02, 2009 | 2004 GMC Envoy

1 Answer

Passenger seat back will not move either direction


Motor on the seat may have gone out, contacts in switch got dirty or worn, or assembly reached limit and stuck. Try sitting in it pushing back hard and adjust. If not youll need to replace switch,b take seat apart to fix or replace.

Dec 06, 2008 | 1989 Mercedes-Benz 300-Class

Not finding what you are looking for?
1996 Mercury Grand Marquis Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...