I recently got work done on it and ever since I've gotten it back the turn signal has been malfunctioning. When I try to signal left or right it'll blink once or twice and then shut off and today when I tried to use it, it didn't work at all. It's the same with the hazard lights too, but my headlights and tail lights are fine it's just the turn signal. Anyone know what it might be?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Guessed it's a V6. Trying to sort this out. If setting the headlamp switch to PARK turns on the park filaments of the front park/turn signal lamp and the tail filaments of the rear tail/stop lamps and the separate tail lamps, the park light circuit is good. If 20A fuse 6 in the power distribution center is OK, the combination flasher in the multifunction switch is receiving power. Power is directed to the turn signal lamps by operation of the turn signal/hazard warning switch. If the turn signals are not flashing, the combination switch may have failed or the turn signal flasher part of the combination flasher may have failed. Finally, the hazard warning switch causes the turn signal elements of the front combination park/turn signal lamps and the rear turn lamps to flash.
Turn signal flasher shot? Turn signal switch bad? Wire harness to turn signal switch (stalk) loose? are all TS bulbs good? Are you sure about fuses? Maybe a loose one, or one that looks good but is not?
the turn signal module(handle) is broken. behind the steering wheel, take off the housing. there are only two screws that hold it in place and the wiring harness, one click and it comes off. replace that and it should work. it controls your lights, fog lights, turn signals, wipers, anything connected to it. that really goes out before the blinker relay(clicker)