Question about 1991 Chevrolet C1500

1 Answer

Turning single works in the front but not in the back

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It should be plinking faster then normal which would indicate the the bulb is blown in the rear lights

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Drivers side front turn single not working , changed bulb and still not working , what could be problem


Double check it's the right bulb called for in the Owners manual. The sockets are very picky about the "bumps" on the end of the bulb. Most likely there is a connection problem anywhere from the wire attachment to the socket, to breaks in the wire to the signal switch or relay for the "blinking" . Start with the connection to the socket and work back. A very bright led light is what I use to find visual problems.

Mar 08, 2015 | 2006 Hyundai Elantra

2 Answers

My right front turn signal on my 2001 ford ranger doesnt work and my inside right turn signal light on dash doesnt work and flashes really fast. Buld on right side was replaced and works when lights


was the correct bulb used? this sounds like a single function bulb was used NOT the bulb that will light with the headlights and ALso produce turn singles

Dec 06, 2014 | 2001 Ford Ranger Regular Cab

1 Answer

My turn single won't work, replaced front and back bulbs and fuse.


If they come on ,but dont flash probably a flasher..If nothing happens then i would check the blinker switch

Sep 05, 2011 | 2002 Chevrolet Impala

1 Answer

Where is the turn single flasher on the 1997 GMC sonoma pickup truck - my flasher / turn single is not working - I have brake , running light ., and have replaced all bulbs in the front and back of truck


The turn signal flasher is located just to the left of the accessory and lighter plugs.It is a black box.It includes the seat belt and ignition key alarm,flasher,and turn signals.Hope this helps.Good luck.

Apr 28, 2010 | 1997 GMC Sonoma

1 Answer

85 chevy 3/4 ton pick up .Rear brake light and turn singles dont work but parking lights work,fuse is ok brake switch is ok and front turn singles work as well as hazerds for the front only work and...


bad turn signal switch broken inside switch, need to remove steering wheel, remove clip, unplug connector under dash on column, undo the 3 screws hold switch in, install in reverse order.

Feb 11, 2010 | 1985 Chevrolet Chevy

1 Answer

Brake Lights and Hazard still dont work


TEST FRONT RIGHT BLINKER CIRCUIT AND REPLACE THE BULB,,WITH PROPER BULB...A DOUBLE CIRCUIT BULB IN A SINGLE SOCKET WILL DO THAT ALSO A SINGLE SOCKET BULB IN A DOUBLE SOCKET HOLDER....CHECK LEFT SIDE BULB FOR ACURANCY

Aug 29, 2009 | 1993 Chevrolet Astro

1 Answer

2002 ram 1500 single cab ext light issues


sounds like a faulty underhood fuseblock..have seen lighting issues with these components

Jul 16, 2009 | 2004 Dodge Ram

1 Answer

Brake and turn single drivers side don't work


Those trucks have a problem with the circuit board that the bulbs plug into. Unplug all the bulbs and see if one is burnt or melted. The fix is usually replacing the board.

Feb 23, 2009 | 1989 Chevrolet C/K 3500

Not finding what you are looking for?
1991 Chevrolet C1500 Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...