Question about 1999 Ford F150 Regular Cab

2 Answers

Headlight bulb replacement 1999 f150 p/u

Step by step instructions for bulb replacement on 1999 f150 P/U

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Is it that complicated? I heard that all you need to do is pull up on some clips and then pull the headlights out.

Posted on Feb 10, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Well you must take out the signal lamp first then un bolt the headlamp replace the headlamp and then replace the signal lamp/Please rate my response thamk you very much

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Step by step instructions on replacing low and high beam bulbs in my 2002 Lexus RX300.


What you need to do is replace both headlight assemblies. The "bulbs" (lamps) do not become discolored. You can try using a "headlight restoration" kit but the results are likely to be unsatisfactory.

Jul 24, 2016 | 2002 Lexus RX 300

1 Answer

How do you replace a headlight bulb in a 1996 toyota landcruiser?


To get exact step by step detailed instructions.Please click on the link below. http://technoanswers.blogspot.com/2011/02/how-to-replace-headlight-bulb-on-1996.html ------------ This should help you to replace the head lights on Toyota 1996 land-cruiser. --------- Keep updated. Thanks.Helpmech.

Feb 25, 2011 | 1996 Toyota Land Cruiser

1 Answer

HOW DO YOU REMOVE THE ASSEMBLY ON THE OLDS 95 SO I CAN CHAGNE THE LIGHTS.. I REMOVED TWO SCRES IN THE FRONT BU IT DOES NOT HELP TO REMOVE THE ASSEMBLY


Step 1:
Be sure the ignition key is not in the ignition, and the headlight switch is in the "Off" position.



Step 2:
Locate and remove the two headlight assembly screws on the top rail of the headlight assembly. Use the nut driver to remove them.


Step 3:
Place a rag between the headlight assembly and the bumper to protect the paint.


Step 4:
Wrangle the assembly outward. There is a guide pin behind the assembly on the fender side that holds it in place. This needs to be popped out of its socket in order to remove the headlight assembly. Pull slightly outward from the side, then forward and away from the car.


Step 5:
Locate the correct bulb socket (high-beam/low-beam). Disconnect the wire connector using the flathead screwdriver.


Step 6:
Turn the socket 1/4-turn counterclockwise to remove the socket from the headlight assembly. Remove the old bulb.


Step 7:
Insert the new bulb into the headlight assembly, and turn clockwise to lock into place. Be careful not to touch the glass bulb of the new socket. This could degrade headlight performance.


Step 8:
Reconnect the wire connector to the bulb. Test the light before replacing the headlight assembly, then turn off the lights again.


Step 9:
Reinsert the headlight assembly, making sure to align the guide pin into the socket. Replace the screws and tighten.

Feb 12, 2011 | 1995 Oldsmobile Aurora

1 Answer

Need to replace headlight bulb 2007 hhr


H13 HALOGEN HEADLIGHT BULB, SOLD INDIVIDUALLY -- Low 55/high 65-watt halogen bulb; 12.8 volts; P26.4t base; A high quality, direct fit OE replacement headlight bulb

3c8c3dc.jpg


How to Replace a Headlight Bulb
(DIY Complexity: Easy / Time: 0.9 hour)

Parts:
1. Headlight Bulb

Tools:
1. Screwdriver
2. 1/4 in. Drive Ratchet
3. Socket Set

Steps:
Step 1 Open the hood and locate the headlight assembly.
o Tip: Most headlight assemblies have a place in the rear to gain access to the headlight bulb.
o Tip: It is recommended that headlight bulbs are replaced in pairs.
o Tip: Always make sure the struts on the hood can fully support the weight of the hood so that it does not close on you while working. The use of a hood prop can securely hold it in place.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 Gain access to headlight bulb.
o Tip: It is a good idea to check the high beam and low beam headlight bulbs at this time.

Step 3 Disconnect the wiring harness and replace the old headlight bulb with a new one.

Step 4 Turn on the headlights and check high and low beams to verify repairs.

Hope this help (remember rated this help). Good luck.

Mar 30, 2010 | 2008 Chevrolet Hhr

1 Answer

Cobalt 2005 ls headlight bulb replacement


Instructions Things You'll Need:
  • 9007 LL halogen headlight bulb
  • Wrench
  • Gloves or clean rag
  1. Step 1 Set the parking brake and remove the keys from the ignition to ensure your Chevy Cobalt won't roll while you're replacing the headlight bulb.
  2. Step 2 Open the hood by pulling the hood release latch located under the instrument panel on the driver's side of the car. Locate the secondary release latch on the front of the hood at the center, slightly towards the driver's side. Slide the latch to the left to release the hood and raise it.
  3. Step 3 Locate the headlight assembly and remove the bolts by turning them counterclockwise. Set the bolts aside in a safe place, so you won't misplace them.
  4. Step 4 Remove the plastic fasteners from the headlight assembly molding. Carefully pull back the front fascia, or molding. You may need an extra pair of hands to perform this slightly awkward task.
  5. Step 5 Grab the headlight assembly and pull it towards the radiator at a slight angle to remove it. This should provide easier access to the headlight bulb and wiring harness.
  6. Step 6 Lift the plastic locking tab on the wiring harness to disconnect the bulb base. Then, disconnect the wiring harness from the bulb socket and remove the black retainer by turning it counterclockwise.
  7. Step 7 Disconnect the bulb socket by turning it counterclockwise. Remove the old bulb from the socket by firmly, but gently pulling it straight out.
  8. Step 8 Replace the old bulb with a new 9007 LL halogen headlight bulb. Put your headlight assembly back together by reversing the steps when you disassembled it. Use 89 inch-lb torque when retightening the headlight assembly

Feb 26, 2010 | 2006 Chevrolet Cobalt

1 Answer

Headlite replacement


Step 1 Shut the Corolla's engine off and engage the emergency brake for added safety. Also, make sure its headlights are switched off.
  • Step 2 Open the hood using the primary and auxiliary hood release latches.
  • Step 3 Use a flathead screwdriver to remove the clip from the top of the air cleaner duct and pull the duct out of the engine2_bing.gif compartment (only when changing the passenger-side headlight.)
  • Step 4 Turn the headlight bulb socket counterclockwise to remove it from the assembly.
  • Step 5 Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.
  • Step 6 Attach the electrical connector to the new bulb and insert it into the headlight assembly. Twist it clockwise to secure its position.
  • Step 7 Test the new headlight to make sure it works before replacing the air cleaner duct (if applicable) and closing the hood.,I hope this helps you and merry xmas
  • Dec 18, 2009 | 2001 Toyota Corolla

    2 Answers

    Need to replace 1 headlight bulb & 1 tailight signal bulb


    Hello,

    Thank You for contacting Fixya.com.

    In order to understand the complete procedure and have some pictorial information about replacing the headlight bulb in a new beetle I would request you to please refer the web site:

    Go to this link..... www.newbeetle.org is by far the best place for New Beetle problems. PICTURES AND ALL http://www.newbeetle.org/forums/showthread.php?t=171

    and for the tail light I would request you to visit the website :

    http://www.ehow.com/how_4554444_light-bulb-vw-beetle-tdi.html

    The material available in the websites are detailed explaination along with pictures which if copied in this reply would make it very big and heavey.

    Good Luck and God Bless.

    Jul 23, 2009 | 2005 Volkswagen New Beetle

    2 Answers

    I have read the owners manual word for word and followed it, but I cannot change the low beam bulb on my 2002 chrysler 300m


    hi it not to hard there a couple of 10 mm bolts to take the headlights out then change the the bulb &reinstall headlight assy

    Jul 10, 2009 | 2002 Chrysler 300M

    2 Answers

    Replacing 96 Ford Aerostar Headlights


    try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

    Mar 20, 2009 | 1996 Ford Aerostar Extended

    Not finding what you are looking for?
    1999 Ford F150 Regular Cab Logo

    Related Topics:

    351 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    60541 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21927 Answers

    Fordexpert

    Level 3 Expert

    5331 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...