Question about 1999 Pontiac Grand Am GT

1 Answer

The blower fan on my 1999 Pontiac Grand Am stopped working

For the last 6 months my blower fan hasn't worked on 1 through 3 settings. Yesterday they all went out. Could this be a fuse,belt, or the motor?

Posted by on

  • jamest1969 May 14, 2009

    On my 1999 grand am 2.4 dohc I have the same problem but 1 and 2 settings do not work.The rest are fine.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

It sounds like the blower motor went out....its on the passenger side under the hood held in by three screws and a plug. takes about 30 minutes to change it out.

Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Pontiac Grand AM SE. Heater fan works for weeks then won't go, try a couple hours later then it goes.


It sounds like the brushes on armature for (blower motor ) are worn. Sometime a bad spot on the armature from not being used often and also by being in the engine compartment where it is exposed to condensation. When the brushes stop at that particular spot, the blower will not start spin process unless it draws alot of current that may be why the fuse blew. You can remove the blower and examine or just make the change.

Jan 28, 2013 | 1995 Pontiac Grand Am

2 Answers

Blower stopped working on 2002 dodge caravan


Someone would need to check the blower motor and the resistor for voltage and ground.

Dec 09, 2012 | 2002 Dodge Grand Caravan

1 Answer

On my wife's 2008 Pontiac Vibe, the heater fan does not come on. No one remembers it stopping, but when I drove it yesterday, it was not working at all. I have checked any related fuses, and they are...


it could be a bad blower motor resister that controls fan speed depending on what fan setting you have set the dash switch on.it could also be the blower motor itself that needs to be replaced.with the blower on try tapping the motor and see if it tries to start.if it tries or starts to work then the motor will need replacing.

May 09, 2011 | 2005 Pontiac Vibe

1 Answer

The fan on my heater/ac stop working on settings 1-4 for awhile it worked on #5 but has now stopped altogether


The blower resistor has gone out but if blower is no longer working on speed 5 then either the blower motor is bad as well or the pigtail connector to the motor are bad. Check the plugs to the resistor and to the blower motor for insulation damage discolored or melted wiring.

Oct 10, 2010 | 2002 Pontiac Grand Prix

2 Answers

2003 Pontiac Grand Am gt. the blower motor


hi

the problem lies with the selector switch.there is some short circuiting taking place inside the switch.so please replace the selector switch.

if my information was usefull please rate me

Jul 01, 2010 | 2001 Pontiac Grand Am SE

1 Answer

The HVAC blower fan on my 2001 Pontiac Aztec stopped working on settings 1-3 several weeks ago. Last week it stopped working at setting 4 and today it stopped working all together. What is the most likely...


the blower not working on settings 1-3 is the blower motor resistor. this limits the power provided to the blower motor itself to change the speed. at setting 4 it is getting full power. since it quit on 4 also, i would still say the resistor needs to be replaced first, then see if the blower comes back. you may also need a blower motor. if you have a voltmeter you can just turn the switch to 4 and see if the motor is still getting 12 volts. if it is and doesn't run, it needs a blower motor too. if it's not, then its just the resistor

Feb 24, 2010 | 2001 Pontiac Aztek

1 Answer

The blower fan speed control stopped working


usually a bad blower resistor is at fault...

Feb 05, 2009 | 2002 Pontiac Grand Prix

1 Answer

Blower motor stop working on 2000 Pontiac GP


Two possibilities I can think of. #1. The blower motor itself is dead, or #2. The blower motor resistor is fried. Blower motor resistor, however, is more known for taking out certain fan speeds, such as the lower fan speeds.

Dec 28, 2008 | 2000 Pontiac Grand Am GT

Not finding what you are looking for?
1999 Pontiac Grand Am GT Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...