Question about BMW 3 Series
I am after purchasing the tools for setting my diesel pump on 320d,year 1999.
bmw say the plug mandrel(tool 112300) is no longer available? and the dial gauge (tool 135200) is £115.37) .
Could anybody please advise me on anywhere that sell the tools i need to carry out the repair.
put your keys in so that your instrument clsuter on the dash come on,(no need to start the engine), use your mileage reset button to change time by turning it clockwise and anticlockwise till you reach the correct time.. it will change on your dash aswell as your radio..
Posted on Jan 09, 2009
SOURCE: Clouds of smoke
I am a BMW technician and i see this problem daily. There is a filter on the top of your rockercover. it is called an oil separater or a breather filter. you can only get the filter at a BMW garage so if you go to stores and ask them for this filter they will know what you are talking about if you tell them you are after having your turbo replaced. Fit this filter and you will notice the smoke will get better if it does not go away completely you might wait another 3-4 weeks and replace it again. hope this helps.
Posted on Apr 01, 2009
I found a few, most running over $100, this link has the equivalent tool costing much less. I 'll leave both links and you can choose. Best of luck on your repair.
Posted on May 09, 2009
http://www.bimmerwerkz.com/forum/3-series-e36/m40-motor-timing-info-59059.html is camshaft and crankshaft marking to be safe side
Posted on May 18, 2009
losen the bolts at the pump flange where it bolts to the engine block and rotate towards the engine about a 1/8 inch also adjust the linkage stop screw inwards no more than 1 1/2 turns
Posted on Jan 21, 2010
Tips for a great answer:
Jun 24, 2014 | 2004 BMW 320d
May 04, 2014 | 2001 BMW 320d Touring
Feb 22, 2014 | Cars & Trucks
Dec 21, 2013 | 2003 BMW 3 Series
Jul 14, 2013 | Cars & Trucks
Feb 23, 2011 | 1999 BMW 3 Series
May 17, 2010 | 1999 BMW 318 ti
Apr 24, 2009 | 1999 BMW 323 Series
116 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: