Question about 1993 Jeep Grand Cherokee

1 Answer

No Start Turn the key on and try to start, it will crank over great but will not start. If you leave the key in run position for a period of time, the check engine light will come on and the fuel pump relay will kick in and the Jeep will run.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 132 Answers

The fuel pump relay is probably shot

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motor turns over but wont start it fires like its trying to start but when I let off key from crank position it trys to start.


Causes can be numerous so here is some reading material which may help you track down your particular issue..........
Crank No Start

Nov 24, 2015 | Cars & Trucks

1 Answer

My 1998 buick century 3.1 will not start. I changed starter , I changed the ignition switch , I even jumped the battery to starter with a push button , It now will turn or crank , but ,, it still will not...


THERE IS A CHIP IN THE KEY I BELIEVE. THERE IS A RELEARN PROCEDURE YOU CAN TRY IF WHEN YOU TRY AND START IT THE SECURITY LIGHT FLASHES. HOOK UP A BATTERY CHARGER. TURN THE KEY ON AND TRY AND START THE CAR AND RELEASE . DO NOT TURN KEY OFF LEAVE IT IN THE RUN POSITION. AFTER 10 MINS THE LIGHT WILL STOP FLASHING. TURN KEY OFF. TRY AND RESTART CAR AND AGAIN DO NOT TURN KEY OFF LEAVE IN THE RUN POSITION. LET SET 10 MINS AGAIN. LIGHT WILL STOP FLASHING AFTER THAT 10 MINS. DO IT AGAIN FOR THE 3RD TIME. SHUT KEY OFF LET SET 5 SECONDS AND START THE VEHICLE. HOPE THIS HELPS

Feb 22, 2013 | 1997 Buick Century

1 Answer

Vehicle cranks but wont start has good fire but no fuel pressure theft light is flashing car has not run in over a year ? what do i do to get the theft light to go out?


Turn ignition to run not start,count to 5,turn off key. Repeat this three times. Try to start vehicle. If its starts you are done. If not you will need to repeat turn ignition on count to 5 then turn off, 3 more times On the fourth time leave key in the run position for 10 minutes. Then turn key off & start vehicle.

Dec 14, 2010 | 1998 Ford Expedition

1 Answer

My car wont start


sounds like security shut down which will start run for second then shut down after several time the security will shut down completely.......you can try what is called the relearn proceedure..this is what you dealer will do...might have to put battery charger on car first... then put key in ignition and turn to the run position do not crank leave it in the on position for ten minutes...... then turn key to the off position then back to the run position again for another ten minutes.....for the last time turn key off then back to run for the last ten minute cycle.... after the final ten minutes is up turn key to off position then attempt to start... let me know

Aug 31, 2009 | 1997 Chevrolet Cavalier

1 Answer

Aztek won't start,key locked in ignition, service engine light on


It is the security chips in the keys. Has this car been wrecked? Was this car made in Mexico? GM had the bright Idea of creating a security system that would do exactly this, I know on cars made in Mexico (like the HHR) You can reset the power and get the key back out, but vehicle will have to be reprogrammed with the master key. This involves turning the key from off to run position without ever going past run (i.e. start position) leave key in this position for 30 minutes. Turn key back to off for 30 seconds then back to run for 30 minutes. repeat this step three times. the last time, after 3rd 30 minute period, turn key off for 30 seconds and then try to crank. Please note this only works if the original master key is being used. You can then reprogram the second key following a similar sequence, only master key that is working has to be inserted to let alarm system know that vehicle is not being stolen only that you are trying to reprogram a key. If original master key is not being used then vehicle has to be taken to the GM dealership to program keys and possible key module replacement.

May 30, 2009 | 2001 Pontiac Aztek

1 Answer

Why is security light blinking on a chevrolet trailblazer and will not crank? we put a new motor in truck and now the security light is blinking and will not crank


That means there is a problem with the VATS System. This sometimes happens when the battery is disconnected for an extended period. You might need to do a relearn for the keys. You can get it done with the right scanner in 5 minutes, but there is a way to do it without one.

Turn the key to the start position, release it to the on position, then leave it on for 11 minutes, then turn it off. Repeat this sequence three times, and on the fourth try it should start if that was the problem.

Mar 30, 2009 | 2002 Chevrolet TrailBlazer

2 Answers

2006 chevy colorado passlock comes on and stays on, truck won't start for 10+ min. Can I disable this feature?


No, it can not be disabled.
The theft system is indicating a short term theft issue.
Have you added any "after market" remote start systems or alarms?
If NO.
Insert the key in the ignition, turn the key to run position ( do not start ) and leave it in that position for 10 minutes. Cycle the key to LOCK position, count to 10, then turn the key back to run position and leave on for 10 more minutes. After the 10 minutes is up, repeat the procedure (1) more time and the security system will relearn the PASS code.
Give it a try and let me know.
Regards,

Mar 23, 2009 | 2006 Chevrolet Colorado

1 Answer

2000 Blazer won't start!


dont laugh.. but take a hammer and beat on the gas tank while somebody cranks over the motor.. If it cranks.. Then the fuel pump is bad.. Try It! Thanx

Mar 16, 2009 | 2000 Chevrolet Blazer

2 Answers

Jeep still experiencing start up problem


Im having the same problem. Here's a question for you, is your cruise control working?

Jan 12, 2009 | 1995 Jeep Wrangler

2 Answers

Security light flashing


Take the Original Ignition key out to the car. Get in it and turn the key on. Every light should light up like your going to start it. The factory security light will flash. Leave the ignition on until it stops flashing. Should take about 10-15 min to do it. once it does, shut the key off and then turn it over to start the car.

Aug 04, 2008 | 1998 Chevrolet Lumina

Not finding what you are looking for?
1993 Jeep Grand Cherokee Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...