Question about 2003 Ford Explorer

1 Answer

Rear flasher not working front flasher flashing rapidly

The rear passenger turn signal does not flash at all replaced bulb it does not light front flasher flashing rapidly

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 235 Answers

With the blinker on hold the socket in your hand and wiggle on the bulb and see if it starts to blink. if so then you have a bad socket that needs replaced or sometimes can be cleaned and apply electrical grease. if you cant get the bulb to blink then get in vehicle and watch the signl indacator while putting pressure on the selector in which ever direction your having problems with. if you get it to work properly by doing this then you will need a new switch .

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My left turn signal recently stopped working. Before ceasing to work, the turn signal (just the left) would blink very rapidly (machine gun speed).


sounds like one of light bulbs was malfunctioning and caused the flasher unit to blink rapidly and iy burned out. Replace front and rear turn lite bulbs and see if flasher flashes. if not check fuse and replace fuse. If fuse okay replace flasher unit. Good luck

Jul 08, 2016 | 1997 Plymouth Voyager

2 Answers

I have a Chevrolet cobalt and the left turn signal will not work the inside light on dash flashes fast. I have changed the light bulb still doesn't work.


Fast flashing usually indicates that one of the exterior bulbs isn't functioning. You've checked front and rear signal lights, right? If the bulb is good, it could be corrosion in the socket, bad ground, broken wire, etc.

Oct 16, 2015 | 2006 Chevrolet Cobalt

3 Answers

I have sourced out all fuses and bulbs, yet continue to have a rapid right turn signal. I don't know where else to look. help?


replace the right rear bulb. the quick flashing indicates a bad bulb. it could be a wiring problem to the rear for the signal light that you will have to check out starting at the socket and working forward.

Mar 29, 2015 | 2005 Chevrolet Uplander

1 Answer

Where are the turn signal flashers located in a 2004 Chevy Malibu Maxx LT ?


check the bulbs when you get rapid flash normally 1 pf the bulbs are out

Jul 06, 2013 | 2004 Chevrolet Chevrolet Malibu MAXX LT

1 Answer

Grand prix front turn signals lights will not work but rears flash rapidly.


Definitely not the flasher, as long as it is flashing or blinking somewhere. Rapid flashing indicates a burned bulb, but since you already tried new bulbs in front, possibly bad bulb sockets, loose connectors, or a bad ground for the front bulbs. If you have a test light or voltmeter (multimeter), check for power at the socket when turns are on. If power then at the front, try new bulbs or trace the ground for those lights. If no power to the socket for turn signals, recheck wiring.

Apr 02, 2013 | 1995 Pontiac Grand Prix

3 Answers

1993 plymouth acclaim turn signal flashes rapidly, new flasher didn't work.


bad earth on a back light i suspect providing their europeon standard lights with yellow seperate indicators and not them funny american ones with a stop and tail and indicators all on the one bulb

Jun 27, 2011 | 1993 Plymouth Acclaim

1 Answer

How to change the turn signal flasher?


Check the the bulbs at the front and rear of the vehicle work. If one is not lit up, replace that one. On some of the earlier model cars the blinkers would stay solid and not flash when one or both bulbs were blown. Modern cars have a rapid flash when one or both are blown

Nov 24, 2009 | Oldsmobile Cutlass Supreme Cars & Trucks

2 Answers

Turn signals flashing too fast


Yes, This is easy. Recall on this problem. Take into dealer for free recall solution and it will stop.

Jun 24, 2009 | 1999 Buick Regal

4 Answers

Front driver side turn signal light doesn't flash.replaced bulb,replaced socket,all other lights work on emergency flasher,except front driver side.rear driver side turn signal light works,but flashes...


replace flasher......usually located in fuse block area...listen in this area....select passenger side ...then select driver side...you can hear flasher clicking...you have seperate flashers for each...FLASHERS are small cubes plugged into fuse block....probable bad driverside flasher

May 09, 2009 | 1998 Buick Century

Not finding what you are looking for?
2003 Ford Explorer Logo

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63574 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...