Question about 2003 Mitsubishi Outlander

3 Answers

Replacing fuel pump need to remove rear seat need to know how

Need to know how to remove rear seat for replacement of fuel pump

Posted by on

  • Anonymous Mar 17, 2014

    Remove rear captains seat

  • Anonymous Apr 01, 2014

    Take out bck seats

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,952 Answers

First you will need to releave fuel pressure......

next remove the rear seat cushion to gain access to fuel pump access panel.....

Removing Fuel Pump....

Posted on Jan 29, 2009

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What is the correct fuel pressure on a fuel pump for a 1990 mitsubshi montero

Posted on Mar 01, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 333 Answers

I believe that the fuel pump is located in the fuel tank which would require the removal of the tank itself or it has an access panel on top of the tank which you can get to from the rear trunk compartment.

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove fuel pump nabiru 2002 station wagon


you have to pull the seat at front part up, then remove the fuel pump body cover then remove the clips from de fuel lines, and remove the fuel pump ring, you may need a tool to do that, once is remove you have to pull out the fuel pump, to instal follow the steps in reverse sequence

Dec 15, 2014 | Seat Cars & Trucks

1 Answer

HOW TO CHANG A FUEL PUMP ON 2002 BMW X5 3DI


BMW has a unique habit, the automaker has, for years, used the rear passenger area of its cars to mount items like batteries, fuel pumps and fuel pump sender units. It makes sense in a weird way as it does keep wire runs short and makes access to the fuel pump and the sender unit more convenient than in other vehicles. The downside is that you have to disassemble the passenger seat to gain access to the fuel pump and the fuel pump sender.

To replace the fuel pump, you have to remove the rear seat starting with the child safety seat holddown covers. The child seat holddown covers simply unclip and slide away.

Next, you have to remove loosen the rear seat back so you can remove the rear seat bottom. The rear seat back slides up slightly so the seat bottom can be removed. You remove the rear seat bottom, being careful to watch the seatbelt lap attachment units, by moving it out and forward. It may take several movements to do this. Once the seat is free, swing it vertical and out of the way.

With the rear seat out of the way, you will see the fuel pump and fuel pump sender access cover panel. It is a sheet of composite material with four access holes per side. Remove any holddown clips or nuts that you find in the access cover panel, being careful to leave it in place, for the moment. Once you have removed the clips or nuts that are used to hold down the access cover panel , place them in a secure spot out of the way, such as an ashtray or one of the cargo trays to ensure you that the clips or nuts don't become victims of the repair (they are easily lost).

Now, it's time to orient yourself to the fuel pump and fuel sender sites. Looking toward the rear of the BMW, you will find the fuel pump on the left (passenger side) of the vehicle and the fuel pump sender unit on the right (driver side).

Next, find the access holes in the fuel pump cover seal plate. Insert a 10 mm ratchet socket and drive arm and remove the fuel pump cover plate access screws.

Since you have already loosened the fuel pump and fuel pump sender access cover panel, simply remove the sheet of composite material and expose the fuel pump cover seal plate. Now, remove the metal fuel pump cover seal plate.

On removing the fuel pump cover seal plate, you have access to the fuel pump assembly. Looking at the top of the fuel pump assembly, you will see the power plug and fuel line.

Next, remove the power plug from the left hand side of the fuel and loosen the fuel line clamp. After loosening the fuel line clamp, remove the fuel line and place it in a small metal container to trap any fuel that might leak out.

Next, remove the fuel pump retaining ring. There is a special tool available from BMW to handle this chore. Or, if you take a flat-bladed screwdriver and a small hammer and place the blade of the screwdriver against one of the raised nubs on the retaining ring, you can gently tap the screwdriver, exerting pressure toward the rear of the X5, to loosen the retaining ring. Once it is loosened, unscrew the ring by hand.

Now, remove the fuel pump assembly and place it on a cloth on the ground. The cloth is there to absorb any leakage.

Now, take the replacement fuel pump and insert it into fuel pump site and replace the retaining ring, spinning it tight by hand. Then, take the screwdriver and hammer again and gently tap the ring, exerting pressure toward the front of the vehicle.

Reattach the power lead and fuel line, tightening the fuel line clamp, and you are finished.

Clean up and complete the repair by replacing the fuel pump cover seal plate and fuel pump access cover panel. Reinsert any clips or nuts to hold down the fuel pump access cover panel. And, reinsert the four 10 mm nuts for the fuel pump cover seal plate through the access cover panel and torque them down.

Finish up by reversing the seat removal steps.

That's it, you have just finished removing and replacing the fuel pump.

Nov 22, 2014 | BMW Cars & Trucks

1 Answer

Fuel pump replacement


1. Release the fuel pressure .
2. Remove the rear seat ,rear door scuff plate ,step plate ,rear seat lock cover ,rear carpet and cover plate on floor panel for access to electrical connection for fuel pump .
Disconnect electrical connector from top of fuel pump .

From here you can remove the fuel pump unit .

Jun 18, 2013 | 2003 Lexus LX 470

1 Answer

Trying to replace my fuel pump on my bmw 325s i need to know how to get to it


ASSUMING ......it is the same as a 325i

-fuel pump located under rear seat (right side looking forward )
-working inside the car lift the rear seat
-Pull up rubber grommet which cable goes through
-remove circular steel cover plate
-disconnect mutliplug on top of pump
-unscrew bezel using hammer & punch
-Pull up pump from tank
-replace with new pump ensuring that rubber seal doesnt get kinked
-replace bezel
-connect mutliplug and test before replacing steel cover
-Ensure no leaks, even take car for a ride to ensure no leaks
-if tests ok then replace steel cover and grommet, & seat.

should take about 30mins taking you time.

Aug 25, 2010 | 1994 BMW 3 Series

2 Answers

1991 honda civic fuel pump replacement


You will need to remove the back seats and you will see the fuel pump in between the back seats and trunk. Run the car, remove the fuel pump fuse to relieve the pressure and then the car will die. Remove the pipes to the fuel pump, replace it and refit the pipes. Pump the gas pedal a few times and start it up (remember the fuse!)

If it is inside the tank (the fuel pump), then you will see the tank is held on by straps. Take them off, have ajack under it and remove the filler neck and screws holding it to the car. Remove the tank, undo the central bit where wires and pipes come out and slide the fuel pump out, replace what you have just done and refit.

Hope this helps, please vote :)

Jul 28, 2010 | 1991 Honda Civic

1 Answer

I need to replace the fuel pump in my '91 honda accord. I know the pump is under the rear seat. I will also replace the relay. How difficult should this be? Any tips? Thanks for the help!!


you need to remove the fuel tank from the car, the you can access the fuel pump. make sure you drain all the fuel inside the tank before removing the fuel tank as it can be very heavy and dangerous.

Apr 08, 2010 | 1991 Honda Accord

3 Answers

DO I NEED TO REMOVE FUEL TANK TO REPLACE FUEL PUMP ON A 2000 TAURUS OR IS THERE A SPOT IN THE FLOOR UNDER THE REAR SEAT TO WROK THROUGH?


no sorry if you are train to get to the fuel pump you need to remove
the fuel tank.
and if you are changing the fuel pump
don't forget to change your fuel filter and pump strainer.

Jul 15, 2009 | 2000 Ford Taurus

5 Answers

2002 Xterra fuel pump replacement


No, like others said, there's an access plate under the rear seats. Most imports (Honda, Toyota, Nissan) have this access plate to get to the pump. Some domestics don't (90's Camaros etc)

May 26, 2009 | 2002 Nissan Xterra

2 Answers

Nissan 2004 Altima fuel filter location and replacement ?


filter is inside of the fuel tank and its a part of the fuel pump assembly. you need to remove the bottom section of the rear seat via 2 clips at the bottom of th eseat.you need a special tool to remove the lock ring on the top of the fuel tank. you wil also need a new o-ring to close itback up. the whole pump assembly has to come out and disassembled to replace flter. good luck.

May 11, 2009 | 2003 Nissan Altima

Not finding what you are looking for?
2003 Mitsubishi Outlander Logo

1,639 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...