Question about 1978 Chevrolet C1500

2 Answers

What size motor

I have a 64 chevy that i bought about a month ago i put a motor out of another it is inlin 6 cylinder but i do not exactly what sixe it is is tehre anything on the motor that will let me figure out what size it is,also transmissionis not original it is an automatic how can i tell which tranny is in it also

Posted by on

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Just follow the leads and your questions will be answered on the inline 6,http://www.ehow.com/info_7829296_292-chevrolet-distributor-specs.html On the tranny id, just go to parts store on line and check out different pan covers for the trannys. they have different shapes that you can compare to yours. good luck

Posted on Dec 27, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

With vin number on motor and also on tranny

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Firing order


Make, model and engine size please!

c687d461-5b63-4ff6-974f-87da38b867c1.jpg

Apr 20, 2015 | Cars & Trucks

3 Answers

What engine did my 64 chevy come with


If that's a full size psgr car it could have a 230 6 cyl, 283 2bbl carb, 327 250 or 300 hp, 409 340, 400 or 425 hp. The 400 and 425 409's were manual trans only all others could be either manual or powerglide. The 409's in 64 had K66 transistor ignition as an option. First year for K66 in Chevrolet line, Pontiac had it in 1963. The 327 first showed in 1962 in both cars and corvettes.

Jul 17, 2014 | Chevrolet Chevy Cars & Trucks

1 Answer

My ford f 150 with a 300 inline six is idling rough but with run, runs good at high rpm but is running rich


I have a 1967 Ford F1oo with the in-line 300 6 cylinder that's running rough what could possibly be the problem The gentleman that I bought the truck from said it would be a burnt valve

Oct 21, 2012 | Cars & Trucks

1 Answer

Looking for engine size, in a '65 chev Vin # 164675J110610


c17hydro_2.jpg
Sorry for this picture being so small but if you go to LMC Truck .com you can see what all the numbers and letters your VIN number stand for.

To know what size of motor you have in the vehicle, you need the LETTERS that are stamped on the engine itself. The locations are:

For an inline 6:

The six cylinder engine letters are stamped on a pad on the right side of the engine at the rear of the distributor-
230 CID 6 CYL---TA, TE, OR TG
292 CID 6 CYL---UH OR UT

For a V-8:

The V8 engine letters are stamped on a pad immediately forward of the right hand cylinder head (driver's side head)-
283 CID 8 CYL---WA AND WE

There is no 350 CID installed in '65 in the Chevy.

Also, this info is for a truck....is your question here for a truck or car?

Nov 20, 2010 | Chevrolet Impala Cars & Trucks

3 Answers

Im doing my brothers oil. how much do i need, 1994 grand cherokee


i buy the 5 quart jug i drain it all fill it with about 4 quarts start it let it run for about 30 seconds then shut off wait 5 minutes check oil fill as needed. then remember how many quarts it took. there 4.0 v6 is usualy 5 quarts. but do as stated to be for sure. then you have the empty jug to put used oil in for recycle.

Apr 23, 2010 | 1993 Jeep Grand Cherokee

1 Answer

Need firing order diagram 1985 F150 inline six


Easyer to explain then it is to get a diagram. Standing facing your truck cylinders are numbered 1 to 6. The front most cylinder being one and the back one closest to the cab is 6. The blackened terminal on the distributor cap indicates the number one spark plug wire position. In clockwise order from the blackened terminal firing order is 1-5-3-6-2-4.

Dec 22, 2009 | 1985 Ford F150

1 Answer

Where are the sparkplugs on a 2003 gmc envoy


You have a 4.2L inline 6 cylinder, on top of engine you'll see six coil pack's running front to back on top of the motor, disconnect harness on each one remove small bolt's pull all six coil pack's out, spark plug's will be in there.Don't worry you don't have to put the coil pack's back in the same hole.

Dec 12, 2009 | 2003 GMC Envoy

1 Answer

1979 chevy c 30


look at http://www.classicparts.com/Literature/departments/335/, they have a lot of material

Sep 26, 2008 | 1979 Chevrolet C/K 3500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...