Question about 1997 Dodge Intrepid

1 Answer

I have a 1997 dodge intrepid my brake lights are not working but the tail lights are so which bulb is the brake light , the one one on right or left.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

First of all do you have a third brake light and does it work???? you could have a bad brake light switch turn on the head lights check all rear lamps then put on the 4 way flashers and check the bulbs the ones that dont light should be the brake lights or replace the tail lights they should be double fillament

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace left rear turn signal on dodge intrepid?


Open trunk, pull carpet back (may have to undo some fasteners). The tail light assembly should be visible. Unscrew the plastic fasteners to the tail light. The whole tail light assembly should now be able to be removed from the outside of the car. You will see the individual bulb sockets where the wires lead to the bulbs. Twist to remove. Take the burned out bulb to the car parts store. Reverse these steps to reassemble.

Oct 24, 2014 | 2000 Dodge Intrepid

1 Answer

How do you change tail light bulb on 1997 Dodge Intrepid?


In the trunk. You will find black plastic wing nuts that hold the felt panels in place, remove and pull back the panel pieces and you can now access the taillight assembly, if you can't access the bulbs from that point you need to remove the tail lights by un bolting the 10mm nuts holding the taillight assembly then remove the taillight from the car now on the outside you should be able to access the bulbs from there by turning the bulb plugs about a 1/4 to a 1/2 turn, reassemble the taillight and interior panels.

Aug 28, 2014 | 1997 Dodge Intrepid

1 Answer

Im replacing a tail light circuit board on both rear lights, is their any special way to do this


just check accurately bulbs if you mixed it could happen like that, some cars for the brake lights use two contact bulbs some of them single contact, two contact bulbs can give two signals which one is used for brake ligths and another for taillight, so check the bulbs carefully

Apr 13, 2014 | Dodge Stratus Cars & Trucks

1 Answer

Right side running lights not working


Remove light, look closely at bulb, also test ground if light looks good, use 12 volt test light ,see if getting power at light socket remember light switch has to be on ,PS there maybe more then one fuse for lights but it sounds like a bad bulb or ground on that one light . hope this helps ,please feel free to ask again. thank you.

Mar 29, 2010 | 1999 Dodge Intrepid

1 Answer

The right tail and brake light doesn't work but the left one do. bulbs has been changed it's not them


Have someone pull the bulb, and check for 12 volts as you press brake pedal, if no voltage, check the harness, make sure nothing in the trunk has interfered with the wiring.

Feb 04, 2010 | 1997 Oldsmobile Cutlass

1 Answer

Brake light problem Corolla 97


the tail light and brake lights are working from double contact bulbs. check the grounding, you dont have enough ground from one of the bulbs

May 30, 2009 | 1997 Toyota Corolla

2 Answers

Right brake light out; tail light works fine


most rear tail lights and turn/stop lights are the same dual filiment bulb. it is possible for your tail light to work and your brake light not to and still have a bad bulb. I would check the bulb first, your brake light works on the left yes? this would mean that the fuse is fine

Mar 31, 2009 | 2006 Dodge Stratus

1 Answer

Brake light bulbs


It Should be the Bulbs on the Outside of the Lenses. Closest to the Outside Corners of the Lenses. Please Rate my Solution, I need all the Help that I can Get! Thanks!

Jan 29, 2009 | 1997 Dodge Intrepid

1 Answer

Tail light works but no brake light on2003 Dodge Ram 1500


if it has a trailer package look at the splitter when you take off the tail light cover might be that plug.

Dec 20, 2008 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

1997 Dodge Intrepid rear brake lights


check the switch by the brake pedal. This is what turns on the brake lights.

Jun 28, 2008 | 1997 Dodge Intrepid

Not finding what you are looking for?
1997 Dodge Intrepid Logo

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...