Question about Mercedes-Benz C-Class

1 Answer

When i push child lock button on my C220, doors automaticly locks and i can not open back doors from inside, but in 6-7 seconds I can open back doors from inside. Why child lock functioning 6-7 seconds?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 104 Answers

If you want to keep the child-locks engaged, and doors unopenable from inside, you must set the lever by hand inside the rear door jam of each door. It should be marked, locked/unlocked or on/off. Are there other issues I am not addressing? I hope this was helpful.

Online tonight, TaterTodd

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock Child lock on nissan if the lock is on and dont open from outside


All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h).
? All doors unlock automatically when the ignition is placed in the OFF position.
The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure: 1. Close all doors.
2. Place the ignition switch in the ON position.
Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more
than 5 seconds.
4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition switch must be placed in the OFF and ON position again between each setting change.
When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver's or front passenger's side).
NOTE:
The automatic door unlock function can be changed using the Vehicle Settings in the vehicle information

Sep 30, 2016 | Nissan Pathfinder Cars & Trucks

2 Answers

My back door in 2004 Ford focus child locks are locked and I can't close my door. How do I disengage the child lock to close my door?


Your latch may be stuck in the latched position. Try pulling on the handle as to open the door while lifting the latch arm.

Jul 31, 2015 | Ford Cars & Trucks

1 Answer

How to open trunk jeep Cherokee from inside


all cars , have child protection. for 20 years now.
read the operators guide. it's in the glove box , on door locks
the driver can block and prevent passengers in all rear areas from egress.
child proof.
they never knew you'd put up a barrier.
How would they, that is all custom modifications.

incase you lost it so soon, here it is for free.

http://www.jeep.com/en/owners/manuals/

on some cars its just master switch

excerpted from my op guide.
Child Protection Door Lock
The rear doors of your vehicle are equipped with child
protection locks. If you push up on the lever on the open
edge of the door it cannot be opened from the inside of
the vehicle. Push the lever down to disengage the child
protection locks.

in your manual read page 36, see photos there too.
page 38 , shows what to do if stuck inside.

all in the manual.

May 17, 2014 | 2013 Jeep Grand Cherokee

1 Answer

Megane door won't open from outside


to open door with child lock activated, insert a plastic strip( i used from Milk bottle) from outside where the child lock is. Try to push plastic in such a way the child lock push from closed position to open position. Myself did it in 3 attempts and door was able to open from inside in megane fidji 51 reg.

Jul 19, 2012 | 2007 Renault Megane II

1 Answer

My back doors wont open


If your back doors won't open from the inside then the child proof locks maybe turned on. Open the door from the outside and look at the edge of the door near the lock for a small lever or screw setting for the child proof lock. Tun off the child proof lock and then you can open the back door from the inside.

May 09, 2012 | Dodge Cars & Trucks

1 Answer

I have also broke off my 2001 Nissan Quest sliding door handle on the driver side. Also the sliding door cannot be opened from interior... Any help is appreciated... Thanks


the child lock rod may have been extended...
open the driver side door, and with a skinny finger, push that child lock rod back in towards the rear of the sliding door
use the passenger side as reference
once you pushed it in, you can now open it from the inside handle

Oct 06, 2009 | 2001 Nissan Quest

1 Answer

Back door wont open.


Are you moving the child safety lock or the door lock? Only the door lock itself should prevent the door from being opened from both inside or out. The child lock is typically a switch on the door near the door pin halfway down the door.

Sep 22, 2009 | 1995 Toyota Avalon

2 Answers

2000 Toyota Sienna Minivan car alarm goes off.


1. Start with key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into ignition (Do not turn) and pull it out.
3. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Turn the ignition to ON (Do NOT Start) then back to OFF.
E. Remove the key from the ignition.

5. Within 3 seconds the power door locks should cycle automatically indicating successful entry
into programming mode. Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks
should cycle once indicating successful programming. If the door locks don't cycle or
cycle twice, repeat steps A and B, your remote has not been accepted.
C. Repeat steps A and B in step 6 for each new transmitter.

7. Close drivers door.

Apr 25, 2009 | Chevrolet Malibu Cars & Trucks

2 Answers

Child locks won't release


1997 ford explorer awd child safety won't open from the inside can you help

Nov 12, 2008 | 1997 Ford Explorer AWD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

164 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...