Question about 1999 Ford Taurus

2 Answers

Heatercore does not get hot only one hose is hot

Heater blows cold air when temp control seton high

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The heater in your car depends upon a flow of hot coolant going through the heater core in order to get hot air into the car. If the heater core is partially plugged, it will restrict the flow. If you have a head gasket that is putting exhaust into the cooling system, it will eventually get into the heater core. When this happens there is no coolant in the heater core to make the air warm. If the water pump vanes have corroded away the result will be very poor coolant circulation causing the heater to not blow hot air. If your car is equipped with a heater control valve that is not functioning properly, the coolant flow will be restricted. One or a combination of these factors is likely the culprit in your case.
Flush the heater core 2-3 times, and if the obstruction does not clear, a new heater core is required.

Posted on Jan 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 443 Answers

First make sure you have the radiator full of antifreeze also check overflow to make sure its at proper level . then let car warm up and feel hoses that go to firewall tword heater core and see if one of them are warm if so you have a blocked water control valve or its got a vacuum line off going to it .. Thanks Jerry holler if this is not it we will go from there.

Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 ford escort heater blowing cool


heater core cloged, get car hot check heaterhose going into heatercore should be two inch thick hoses going into the heatercore, underhood against firewall pasenger side, after hot while running heater on, chech to see if both hoses r hot, if one is cold,that means there is a restriction in the heatercore, sometimes on older cars there is a external valve run by a vaccume hose, or cable, thats fixed in with the heater hoses , sometimes this valve jams and can be manually switched.

Dec 16, 2012 | 1993 Ford Escort 4 Door

4 Answers

I have replaced the radiator and the heatercore and the thermostat but I am still getting cold air blowing


No way of telling from where I'm sitting but I definitely would check the heater controls (both vacuum and electrical) including blend door actuators on the heater box.

Oct 19, 2011 | 1997 Ford F150 Regular Cab

1 Answer

Why is the heat blowing cold air but at a really high idle it blow hot air for little period of time.the temp of the engine is 195degrees. all the fan controls and the temp control is in the hot position


you could have a couple things going on. possible low coolant? most likely cause as i assume you have checked coolant level would be heater core restricted. to fix this you remove heater hoses and back flush heater core with water. if this does not do it you may have a water pump not circulating at idle but this usually comes with vehicle running hot at idle.

Feb 16, 2010 | 2001 GMC Safari

2 Answers

4.6 liter has one heater hose warmer than the other. may be plugged core,or is ther a fuse to climate control switch?


Look for a heater valve on one of the hoses if there is no valve i would say its a plugged heater core.

Dec 11, 2009 | 1999 Ford F150 Regular Cab

1 Answer

1995 GMC suburban temp guage pegs high, but heater


Sounds like there may be an air pocket in the system.
Try 'burping' the system. If this still doesn't fix the problem, check the temperature of the heater core hoses (in and out) The inlet should be fairly cool, the other should be piping hot. If they're both cold; the heater core has an internal blockage.

Next, replace the thermostat with a winter (180-195 F) derivative.
Bleed the system accordingly, and keep me posted!

Nov 30, 2009 | 1990 GMC C2500

3 Answers

NO heat.... Just is blowing cold air, never warms up. Do I just need to change the thermostat or is this going to be a bigger job? And where in the hell is the thermostat!?!?! (yeah, I have worked on allot...


Forget the Thermostat.
Start with no $.
Check Heater Core, leaks in rubber hoses ( they go to the firewall, should be hot when touch them (2) ) Coolant Level.

Nov 07, 2009 | 1999 Mitsubishi Galant

1 Answer

I have an audi a4 avant the temp guage is normal but the heater is blowing cold air can you help


common problem, heatercore needs cleaning, remove both hoses going to heatercore and run water through one hose at a time, for about 30 seconds,use water hose with a nozel spray with hose fully open , many places would just sell you a heatercore which would cost about $1000.00 when all it needs is a backflush,( cleaning) good luck, hope this helps.

Oct 29, 2009 | 1996 Audi A4

2 Answers

Heater blows cold air, replaced thermostat &


try to back flush the heater core. and if that dont work check the blend door it see if it is working.

Oct 15, 2009 | 2002 Mitsubishi Galant

1 Answer

Heater doesn't blow hot air


First check the coolant level in the radiator. Check your heater core hoses on the firewall underneath the hood. Let the car come up to temp. and feel the two hoses. If only one of them is getting hot you may have bad heater core or a bad heater control valve.

Jan 04, 2009 | 2003 Dodge Intrepid

Not finding what you are looking for?
1999 Ford Taurus Logo

Related Topics:

471 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...