- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
does it click or grind when pushing window button if so the window lift track may need replaced, if there are no sounds then disconnect the wires from the lift motor and with the ignition on so power is sent to switch, push button and check wires to 12 volts dc. If no power I would replace the driver side switch after checking the wires for defects. If there is power then I would re-install wires to motor after turning off key and try button again with power on. replace motor if it doesn't work.
ive seen this before, on the drivers door you have all window buttons,the window that is causing the problem push and hold the button forward and i mean hard forward but dont break it,until the window resets you might need to do this a couple of times until it resets.please rate this answer.adrian,,,,,,,,,,,,,,,
This may very well be your window actuator. Let's try a test. Push your window button up or down. See if you here it humming. If it is trying to go up, it could simply be off track. If there is no sound at all, it is most likely your actuator. You could get a used one for less that a hundred bucks. I would get it up, then leave it up until you get the issue resolved. OH...one more thing, it may be your switch. If you have someone or know someone that could take your door panel off and look at it. It is one of the three, I promise. I hope that I helped you. Let me know. Thank you and have a great night.~MWD