Question about 1995 Chevrolet Blazer

1 Answer

95 blazer 4x4 4 wheel drive not working

-i have a 95 blazer it snowed heavily today i was driving the truck in 4 wheel drive pulled out of a parking lot and the 4x4 disengaged and what i mean by that is that it stopped working i got it to the garage and the actuator is engaging the 4 wheel drive and the front driveshaft is spinning but the front wheels don't turn i had the truck up on jackstands and could see the driveshaft spinning is there a sensor that locks the hubs into plce or is the front differential gone?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

There is a vacuum actuator mounted on the front differential that locks the shafts to engage four wheel drive.

Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 Chevy blazer and I am having trouble making sharp turns left and right its almost like the breaks are sticking but I have replaced everything but those hose itself. It also happens if I have...


If it feels like the front end is hopping or binding than I would put my money on the four wheel drive being engaged. On dry pavement the four wheel drive has no way of of slipping through a turn. the front end will hop to compensate for this.

If your lucky enough to find a snow covered parking lot or field or even a loose gravel road, try some tight turns. If the problem goes away its in the four wheel drive system.

Mar 01, 2015 | 1998 Chevrolet Blazer

1 Answer

BRAKES LOCKUP


one of your sensors is out on your ABS system. What will work until you want to fix it is to pull the fuses for the abs( the one from under the hood) and theres one you can pull from the fuse box on the left side on the dashboard. you will not have abs braking but the petal will not get hard and unless you drive in snow its not a ploblem driving without ABS

Apr 19, 2013 | 1999 Chevrolet Blazer

1 Answer

ABS LIGHT IS ON WONT GO IN TO FOUR WHEEL DRIVE


Check with a code reader or scanner, the ABS could be at fault

Mar 24, 2013 | 2005 Nissan Frontier

1 Answer

Bought my 1994 Blazer used last month. Last night engaged 4-wheel for snow driving for the first time. Now I need to get it back into 2-wheel and don't know how to go back! Can you help? Thanks!


Try with the vehicle in neutral, There may be a button on the shifter that has to be pressed and then pull the shifter back into 2 wheel. Let me know if that works.

Dec 13, 2010 | 1994 Chevrolet S-10 Blazer

2 Answers

4 wheel drive hi wont work but 2 wheel and 4 wheel drive lo will in my 03 blazer


first you need to figure out if 4 wheel drive in 4 low is working. i know you said it is but do the front tires actually pull... if it is than you have a transfer case issue... if it does not than you probably have a vacum issue with the front hubs

Jan 30, 2010 | 2003 Chevrolet Blazer

1 Answer

1995 Chevy S10 Blazer will not go into park.


theres a shift cable if its floor model,linkage for column model.

Apr 25, 2009 | 1995 Chevrolet Blazer

1 Answer

2003 GMC Sierra 2500HD 4X4 problems


GOOD MORN SNOWED 18 INCHES ENGAGED FOUR WHEEL DRIVE IN BOTH HIGH AND LOW, FRONT LEFT WHEEL NOT PULLING RIGHT FRONT DID PULL. RODE AROUND FOR A WHILE. WHILE PARKING THE TRUCK IN MY DRIVEWAY THE FRONT RIGHT STOPPED PULLING IM STUCK IN SNOW NOW. TEN MINUTES BEFORE RIGHT WHEEL STOPPED PULLING THE DFROSTER BLOWER MOTOR STOPPED BLOWING ANY IDEAS

Jan 09, 2009 | 2003 GMC Sierra 2500HD

1 Answer

4 wheel drive not working


Vacume lines or vacume switch on transfer case,or vacume pod to front axle.

Jan 05, 2009 | 1993 Chevrolet S-10 Blazer

2 Answers

95 chevy blazer 4wheel drive problem


I now these trucks pretty well, I own 2, a 2000 two door and a 95 4 door and before them I owned a 88 and an 87, so look I suggest you use 4 hi but in low geer(1st geer) and just let it grab by itself, cause I find first thing it's hard getting into 4 low cause you must be in neutral,and I usually engage it with only the ignition on without actually running the truck to make sure it actually engages, we get a lot of snow up here so I'm letting experience speak for itself, hope it helps...

goodluck...

Dec 17, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

526 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...