Question about 2006 Jeep Liberty

1 Answer

Ticking sound in engine, poor performance

Hi - I have a 2006 Jeep Liberty and just the other day a ticking sound, that got increasingly loud showed up. I drove it straight home, about 3 miles and parked it. It was one of the coldest days we have had, about -35c. We live about 2 hours from the closest Jeep service station. Today it is only about -5c, so we started it and the ticking sound is still there and now it doesn't seem to perform very well. Can anyone tell me what might be wrong?

Posted by on

  • Richard Scordino May 11, 2010

    What reading do you have on oil pressure gauge??

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Low oil, lifters, cooling fan, serpentine belt

Posted on Feb 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Luz marcada con el numero cinco?


2003 Jeep Liberty- Reading Engine / Diagnostic Codes ...

? 1:13
https://www.youtube.com/watch?v=pGrPBBzp7wE
Jan 6, 2013 - Uploaded by DeathScouter
2003 Jeep Liberty- Reading Engine / Diagnostic Codes ..... error code will flash 2 times, brief pause, flash 1 time, pause, flash 5times, pause, ...

2005 Jeep Liberty possible cause of P0442 error. - YouTube

? 5:26
https://www.youtube.com/watch?v=2ba-gH0gadg
Dec 21, 2014 - Uploaded by TheBGravit
While replacing a bad fuel pump I believe I found the cause of a P0442 Error code. I was able to repair the ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - My jeep Liberty 2009 does the same the Dashboard showed a code of cylinder .... i have a jeep liberty 2006 with the # 5 cylinder misfire. i replaced the sparks... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the ... 2002 jeep liberty camshaft posistion sensor error code p0340 5 answers.

Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Recently got a second hand 2005 Jeep Liberty Sport. Everything worked fine ... #5intake valve seat dropped and held open the intake valve. 2008 Jeep Liberty.

OBD-II Trouble Code: P0305 Cylinder 5 Five Misfire Detected

www.obd-codes.com/p0305


Dec 08, 2015 | 2005 Jeep Liberty

1 Answer

I have a 2003 jeep liberty. I put an oil change on it,but its ticking some..Not loud ticking.What do you think that is,and will it stop?


Yes is a lifter need to add some Lucas oil thickener to calm them down but you might want to fix that for the long run

Feb 14, 2015 | 2003 Jeep Liberty

1 Answer

Code u1411 jeep liberty 2006


wow , no engine options stated, or type of driveline.... wow.
this is covered in the FSM, read that.
it states
U1411-Implausible Fuel Volume Signal Received that means to get the car fully scanned,
using a real scan tool that sees all 2006, jeep DTC errors.
including BCM codes.
the manual tells you what to do.

here is just small expert from the Factory.serv.manual

quote
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE - DIAGNOSIS AND TESTING)(Refer To List 1).
Theory of Operation
The BCM has to send the PCM a fuel volume signal over CAN C. The signal the BCM sends over CAN C is implausible.
Diagnostic Test
1. ACTIVE DTC
Ignition on, engine not running.
With a scan tool read DTCs.
Is the DTC active at this time?
Yes
  • Go To 2
No
Refer To List: 2. CAN C BUS DTCS ALSO ACTIVE
With a scan tool check for DTCs in the BCM.
Are any CAN C related DTCs active at this time?
Yes
  • (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the appropriate diagnostic procedures.
  • Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES/FRONT CONTROL MODULE - DIAGNOSIS AND TESTING)
No
--------------------------------------------------------------------------------------------
that word CAN , means the vehicle network communications buss called CAN.
if the PCM can not TALK to the BCM. this can cause the
data to be wrong. and the
Implausible , data.
greek ,huh,
get it serviced by any ASE shop in town or if desperate JEEP.

Oct 03, 2014 | 2006 Jeep Liberty

2 Answers

Why does my car sound like its tapping loudly at an idle


check engine mounts, Ioose nut inside rubber mount,it makes that noise when the weight comes off motor

May 07, 2014 | 2006 Jeep Liberty

1 Answer

Have a 2006 chrysler 300, 3.5 with loud ticking noise during acceleration, also experiencing loss of power. Replaced both rocker assemblies and performance improved but ticking is still there.


sounds like bad valve seats or seals do you have a oil pressure gauge on your dash.check the pressure.then check your return ports on top of the head thats giving you the problem see if the oil is returning to the oil pan.sometimes the return ports become blocked and the oil stays on top of the head.and see if the oil supply is making up to the head.hope this helps.mark

Feb 19, 2014 | 2006 Chrysler 300

1 Answer

Ticking sound coming from a pulley 2009 jeep liberty


if its an idler pulley or tensioner replace pulley, if its a component like alternator replace the component but if its the AC compressor pulley the clicking is the magnetic clutch field trying to engage possibly low freon or limit switch causing unit to engage,

Apr 17, 2013 | 2006 Jeep Liberty

1 Answer

I have a 2004 GMC Envoy XUV with 127000 on it. The vehicle has been maintained and services better than any of my previous vehicles so this specific issue is just driving me crazy. About a week ago I...


These engines are known for ticking fan clutches. If the ticking doesnt significantly increase with the engine revving, it may be the fan clutch. The clicking usually happens momentarily and dissipates, and increases only to a certain engine speed. If its an internal mechanical issue, ticking will increase simultaneously with the engine speed increase.

May 27, 2011 | 2004 GMC Envoy

1 Answer

2006 BMW 3251 loud ticking sounds from engine


this is a very common issue with any of the bmws with n52 and n52k engine,as long as oil level is ok and is being changed regularly than than a "blleding proceedure" may solve this problem, when the engine has been running long enough that it is hot run the engine at idle to 4500 rpm for 10 to 12 min to start, if is still present after this attempt again.It has been said that this could take up to 30 min at longest.The reason for the ticking noise is a very tiny air gap in the hva and or lifters, try this and if does not work than the lifters should be replaced, although this noise doesnt really hinder the performance it does take away from driving such a nice car and having a loud noise come from the engine, good luck

Feb 17, 2010 | 2006 BMW 3 Series

1 Answer

My jeep rattle's/vibrates and it sounds like a truck when you let of the gas.


check motor mounts defective ones can cause engine to vibrate

May 25, 2009 | 2006 Jeep Liberty

Not finding what you are looking for?
2006 Jeep Liberty Logo

Related Topics:

559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...