Question about 2000 Ford Ranger SuperCab

1 Answer

2000 ford ranger 4X4 auto

Will sometimes not go into 4X4 and sometimes will not come out of 4X4,.

Thank you

Posted by on

  • sschaper Feb 04, 2009

    Stuck in 4 low. 2000 Ranger supercab, automatic 4wd, dashboard switch to shift it.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Disconnect 4x4 switch located underneath ffront of truck. Disconnect battery. Reinstall both and see if it is cleared out of 4 wheel drive.

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause my 2000 ranger to buck between 45 and 50 mph going up hill


Yea! I'd like to see the answer to this also!
My Ford Explorer 2000 does the same thing going up hill. Especially with a loaded trailer on.
Local mechanic had it for the day and couldn't put his finger on it.
I can alleviate the problem by turning the AUTO Trak knob to 4x4 Hi while driving and the jerking stops.
I'll keep an eye here to see what others think
Cheers
Trevor

Feb 15, 2015 | 2000 Ford Ranger SuperCab

1 Answer

1992 Ford Ranger 4.0L; I push the 4x4 button, as you drive there is a bang sound from the front end, sounds like the drivers side where the noise is coming from, Under no load not so noticeable. Universals...


Is the 4x4 an Auto Engage? If not you must be STOPPED and in NEUTRAL to activate your 4x4. Being a 1992 Ranger I am going to guess it is NOT Auto Engage, therefore you must be stopped and in neutral.

Hope this helps.

Sep 09, 2011 | 1992 Ford Ranger

1 Answer

Need a diagram for a 2000 ford ranger,4x4 ext. cab fuse box...thank you!


Check your 2000 Ford Ranger - Owners Manual (page 140 and next).

I really hope this help (remember rated this) TY for using Fixya.

Mar 30, 2010 | 2000 Ford Ranger SuperCab

1 Answer

Ford ranger 2000 4x4 vacuum diagram


i have a 2000 4x4 ranger it has 4.0 extra cab my fuel mileage is good one day and the next bad from 5 miles to 18.8 per gal and i lose power and it seem that 4
4x4 kicks in out sometime thanks

Mar 25, 2010 | 2000 Ford Ranger SuperCab

1 Answer

2000 Ford Ranger XLT Automatic trans. 4X4 3.0L


Check your operator's manual. Make sure any and all fuses that have anything to do with the affected items are not blown and are working properly. If you can; check for loose fuse connections or wires. Hope this helps. God bless!

Nov 04, 2009 | 2000 Ford Ranger SuperCab

1 Answer

I have 94 ranger and the auto hubs want lock in


Sometimes you may need to go into reverse then back to get the desired effect. The hubs probably need to be cleaned and regreased.

Jul 08, 2009 | 1994 Ford Ranger Supercab

4 Answers

Location of GEM Module on 1998 Ranger


i am almost sure it is in steering col area by firewall. but call any part store like auto zone and they can print it out and tell you if your ford dealer wont. but on the fords they usualy are all in the drivers steering area sometimes way up by fire wall

Jun 15, 2009 | 2000 Ford Expedition

1 Answer

1999 ford ranger 4x4 wont engage


ck frt drive shaft out of trans-fer case is turning if it is ck both hubs on outside of axles auto locking hubs have alot of problems

May 30, 2009 | 1999 Ford Ranger SuperCab

1 Answer

Stuck in 4x4 Low


put the truck in neutral and hold the brake then try to take it out

Dec 15, 2008 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...