Need a belt diagram for a 1995 bmw 318 ci - 318 BMW Cars & Trucks

no gas, weak battery, crankshaft or camshaft sensor is bad, fuel pump bad, fuel pump relay or fuse is bad, haven't pushed clutch down far enough(rug caught underneath), fuel filter clogged, ignition coils bad. You need to give a hint as to what you have tried. Does it crank but not start/ Does it simply click(starter) and not crank/

Look up your car on RealOEM.com

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1997/make/bmw/model/528i/1997_bmw_528i_drive_belt_routing_diagram.htm

Check your pulleys and make sure they spin alot of times the smooth pulley the guide needs replaced they get locked up with dirt and cause belt to stretch

The belt diagrams are usually on the underside of the hood or on the crossmember at the front of the engine bay.

Regards,
matt

You need to get some new plastic snap clips.

go intenet exploer type in 1995 bmw 318 ti engine diagram ,( i just did) and you can download what you need

Most have a diagram somewhere under hood.

All belts are easy to work out how to put back on, never needed a diagram in my life, 1. Did you take the belt off? 2. If so and you don't remember how to put it back your and idiot for not drawing a diagram for yourself first. 3. Just go to workshop and get them to put it on. Every person that pops up a bonnet thinks they are mechanic. These are the people don't have clue what they are doing brake and destroys things then come and disturb me while i'm working to ask me how to fix it. These **** are on drugs why the **** would I tell them how to do it something when doing that is my bread and butter. Didn't go to trade school for 4 years to tell other **** how to do it. & THIS TRADE IS THE HARDEST TRADE NEVER STOP LEARNING NO MECHANIC KNOWS EVERYTHING AND WAY UNDERPAID.