Question about 1985 Volkswagen Golf

1 Answer

How to install the vacumm hoses, rabbit mod. 1985

In the carburator and the distributor from where to where

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Volkswagen Master
  • 443 Answers

The one that goes to the distributor doesnt **** unless you rev the engine .. the one that sucks all the time goes to the transmission if its an automatic.. and the Big one that sucks goes to the valve cover or pvc valve. thanks Jerry

Posted on Jan 28, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Schematic for hoses on carburator on a 1985 buick century

Here is the diagram for the 3.0 V6 engine which I assume you have.



Apr 09, 2013 | 1985 Buick Century

1 Answer

What would cause no fire on a 1985 f250 4.9l

are you getting spark out of the coil? what about out of the distributor to each spark plug?

Mar 11, 2013 | 1985 Ford F 250

1 Answer

Need vacumme hose diagram for ford kc laser 1985

We do not have these diagrams. Try the public library is my best suggestion or try and find a used factory manual.

Nov 08, 2012 | Cars & Trucks

1 Answer

1985 Chevy: I have a 1985 2.8L chevy 4x4 Blazer I just re...

All GM have ignition coil problems , your getting too much fuel , I have seen O2 sensors and plugged catalytic mufflers too many times , be careful the next ride the vehicle will catch on fire..Try the coil first

Apr 14, 2017 | 1985 Chevrolet Chevy

3 Answers

My honda civic manual carburator is not properly working. it won't start if you will not step on the gas. what should be the problem? idling is also not balance.

check your fuel filter. and your pump. be sure to give the carb a good bath with crab cleaner to rule out clogged hoses or plugs

Feb 23, 2010 | 1992 Honda Civic

1 Answer

83 vw rabbit turns but wont start

the hose betwin the engine and fuel dist cant have any vac leaks or hoses off or it wont start

Jul 17, 2009 | 1983 Volkswagen Rabbit Pickup

2 Answers

Vacuum line schematic 1987 toyota corolla le front wheel drive

It is similar to my rear wheel drive two door.

The main vacuum line from a vacuum source on the intake goes to the multi-hose valve on the top and the distributor vacuum advance.This multi-valve switching valve is the main connection to the other vacuum hoses on mine. Two lines come in from a vacuum source and thre go out to three components according to tempature. On mine the middle one off to side 1)goes to choke opener and switching vacumm valves mounted on the fenders the other middle one 2)second from top goes to another choke opener and EGR Valve and EGRModulator. The bottom hose connection is on when cold 3)and goes to a part on the carburator to help it run better when warming up a AAP valve.

There is a check valve diaprham thing inline to the EGR vlave on the second line from top.

I have another vacuum line on the drivers side of the carburator that has a check vlave inline but larger it goes to the throttle linkage to help slow the closing of the trottle on rapid deceleration.126c338.jpg14b3a33.jpgf95de67.jpg9f023f4.jpga890bd7.jpg5531e92.jpg

Mar 15, 2009 | 1987 Toyota Corolla 2 Door

1 Answer

1985 camaro that does not crank

Stop jumping all over the place!!! 1. check for spark. If none find out why. Check for proper timing. "basiline" timing at about 8 degrees btc. MSD units are nice when they work, but if no spark, pull it out and get an old style hei setup and stick it in there for a while.(hooks up with one hot lead) 2. If spark is working, check bowl levels on carb (I do this by attaching a syphon hose to fuel inlet and opening port on side of each bowl, adjusting level so fuel does not spill out and is just below level of hole.You checked the it in "straight up"? (cam mark down, crank mark up)
Fuel pressure should not be above 7.5 lbs. in fact, for start up testing I'd lower it a bit to about 5psi. (use a gauge) That way you won't be blowing needle valve off the seat. Unless you have the valves adjusted too tight, there is no reason for it not to start!!!
Good luck!

Mar 07, 2009 | 1985 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

77499 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8825 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides