Question about 1989 Peugeot 405

2 Answers

Peugot 306 indicator noise and wfront electric windows

Hey front electric windows dont work on my peugot 306 1.9d when i tried them the fuse kept blowing, so i changed the switch pannel that was on the door and the same thing happened any ideas? also my indicator noise keeps going off by itself and is really annoying/? help much appreiciated

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Hey kempster_rob the problem is in the wiring between the doors and the body, the wiring is short and is constructed wrong, so when you after 3000 openings and closings the wires brakes and either loose connection or makes shortcuts between the different cables causing fuse blows and disrupted working electrical system. Solution is to open the isolation around the cables and either repair them or displace them, its possible to buy a repair kit at the peugeot dealer

Posted on Jan 28, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check the relay switches in the fuse panel sounds like one isnt working and the windows are getting to much power which will blow the fuse

Posted on Feb 01, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Peugeout 306 clunking sound HELPPP

check the suspension ball joints and rubbers . Check the steering ball joints and the rack end bushes for wear. Any front end steering noise is a cause for alarm as it is indicating a part worn excessively and is ready to fail

Feb 08, 2014 | Peugeot Cars & Trucks

1 Answer

Need answers why my peugot keeps blowing fuse for front electric windows

I think some spill over the power window button and is still wet inside!!!

Jul 07, 2011 | Peugeot 604 Cars & Trucks

1 Answer

I have a peugeot 306 lx 2001. electric window not working?

if the right door window works: pull out the switch for the power windows, and try to change the switches between them, to see if the problem comes from there, if it works replace the bad switch, if still not working take out the door panel and take a look at the wiring to the motor, if all good then the motor is the problem. but it usually comes from the switch.

Mar 15, 2010 | 1989 Peugeot 405

1 Answer

Got a peugot 306 1995. how do i get into the

should be a cover that snaps off around the tail light on the inside of the car

Mar 10, 2010 | 1990 Peugeot 405

1 Answer

Problem with electric window passenger side peugeot 306 1998

Very common on the 306, the door wring from the inside of the door jar into the side of the dash board gets frayed and then the windows stop working or work intermitently, does the wiondo go up and down when the door is all the way open? try it and let me know.

Most likely it will be the wiring, please get back to me if you are unsure what I mean.


Feb 06, 2010 | 1987 Peugeot Liberte

1 Answer

Hey there 306 d turbo wipers wont work?

fuse will be located under the hood in a fuse box near the firewall....

Sep 09, 2009 | 1990 Peugeot 405

2 Answers


it sounds like the switch might have gone bad on you

Jun 09, 2009 | 1991 Peugeot 405

1 Answer

Indicator issue

It could possibly be that one of the indicator bulbs has broken , when this happens there is a higher voltage drop going through the remaning bulbs which makes them blink faster.
Try switching on your hazards and walking around to see if all the indicator bulbs are working.

Jan 15, 2009 | 1991 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

mike hayward

Level 2 Expert

279 Answers

Wahs Team

Level 2 Expert

215 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides