Question about Ford Focus
2005 ford focus c-max 1.8 I need the cylinder head torque setting
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees
Posted on Jul 26, 2009
BMW cylinder torque setting all models
According to my service manual as follows.
Cyl head to engine block (torx e12 M10 bolts)
Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees
Cyl head to lower timing chain cover 10nm (89in – lb)
The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.
Posted on Aug 29, 2009
You need to buy the manual, because you also need to know the order in which to torque them.
usually you start at the middle and circle outward.
But they can differ. Some cars you always need to put in new head bolts. Others are done in several stages. This is too critical to take chances on.
If you really can't afford $19 for a manual, go to the library and xerox the pages.
Posted on Feb 09, 2010
Tips for a great answer:
Oct 19, 2014 | 2005 Ford Focus
May 15, 2014 | 2005 Ford Fiesta 1.3
Dec 16, 2012 | 2000 Ford Focus
Apr 26, 2011 | Ford Focus Cars & Trucks
Mar 23, 2011 | Volkswagen Golf Cars & Trucks
May 07, 2010 | 2000 Ford Focus
Apr 18, 2010 | 2001 Ford Focus
Sep 18, 2009 | 2000 Ford Focus
Jan 26, 2009 | 2000 Ford Focus
81 people viewed this question
Usually answered in minutes!