Question about 2010 Chevrolet Suburban
Wipers working very slowly on all speeds, or not at all.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Well sure enough all I had to do was replace the circuit board...wish I had done this a couple months ago...it was so easy to do and will now be much easier to drive with being able to see clearly again....
Posted on Jan 08, 2009
SOURCE: 1997 Suburban windshield wipers
Don't need the book on the truck. For starters, go to your local dealer parts department and they can print out the label of the fuse panel for your truck. The fuse in question will be wipers. The most likely cause of your problem isn't your wipers but the swicth itself. Depending on whether or not you have cruise control, you can buy one for less at an aftermarket cruise control company. Once you get it, we can go live chat to tell how to change it out cause it's trick but all you need is string and tape. Before you buy the new one, unplug yours at the bottom of the steering column and plug the new one in to see if it works. If you found this helpful please post as such. I f you go to the shop, please post this as fixya. TY
Posted on Jan 16, 2009
Rear washer may have it's own reservoir . Can you hear a pump humming when you activate the washer? Look in the under flooor compartment
Posted on Mar 22, 2009
replace the wiper board, go to your local chevy dealer and purchase the wiper board. remove the wiper motor cover & you'll see the wiper board. be careful not to break to the plastic arm.
Posted on Oct 13, 2009
I found problem to be that corrosion sets in between the CAMS plates
that circle in an opposing fashion and does not let the wiper arms park
correctly. Be very careful with this mechanism if you have the cowling
TURN the KEY and WIPERS OFF and watch your fingers so you don't get them
WARNING if you leave the power on and try to move the arms This cam mechanism springs to life and will try to self park the wipers on their own so Turn the Power and Wipers Off.
SOLUTION: 1. With the ENGINE COLD, Spray a lubricant that FREE'S CORRODED PARTS like WD-40 between the gap of the 2 CAM Plates and on Top of the plates, or use some other automotive parts lubricant that free's corroded parts(let it soak for 5 minutes). 2. Gently Try to manually move the arms back and forth a little bit so that the spray works into the parts. 3. This may not be necessary but I had to do this the first time. There is a notch in the top cam that has a STUD that locks the 2 CAMs together. You can push on this STUD to unlock the cams by manually moving the wipers(use a screw driver to push on the STUD and have a friend gently move the wipers manually. Spray the area LIBERALLY with with the Lubricant Spray and see if you can move the CAMS back and forth and work the lubricant in.
Then with the wiper cover out of the way and all tools clear Try to cycle the wipers HIGH and LOW, ON and OFF a few times it may stick the first couple times with the wipers in the up position but I am confident that the lubricant will work its way in and free these CAMS the way they are supposed to. Your wipers should self park after cycling them after 5-10times. This should solve most of the problems with these wipers and should be relubricated as needed. Clean up any extra lubricant Put the wiper cover back on.
Posted on Dec 12, 2011
Tips for a great answer:
Feb 09, 2016 | Cars & Trucks
Sep 17, 2014 | Cars & Trucks
Sep 15, 2014 | 2008 Jeep Patriot Sport
May 04, 2014 | 1999 Chevrolet Suburban
Mar 21, 2014 | 1994 Ford Crown Victoria
May 09, 2010 | 2003 Chevrolet Suburban 1500
Mar 17, 2010 | 2003 Chevrolet Suburban 1500
Oct 23, 2009 | 1994 Geo Metro
Aug 14, 2009 | 2000 Honda CR-V
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: