Question about 1999 Mazda MPV

1 Answer

Motor turning over but not starting has plenty of fuel.

I think maybe fuel pump.

Posted by on

  • Philip M. Alexander May 11, 2010

    Did you check the fuel flow from the pump to the filter, then the filter to the injector common rail fuel test port? Did you check under the hood for the two fuses that control the fuel pump and the fuel injectors? If all that checks out look under the rear storage area under the carpet for a black gromet and a white and yellow plug. Two wires branch off and go to the center of the floor then down to the fuel tank. disconnect that plug and check resistance on those two wires to the fuel pump. From my memory it should read like .08 ohms if the unit is good. Check voltage while one of your buddies turns the key. If all checks out you just may have a bad pump. **** I ahve found that the common problem has been a bad connection at the plug, cloged fuel filter, or a blown fuse in the pump or injector circuits.

    Good Luck I hope I helped.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

The fuel pump is in the tank the tank is held up by 2 straps and when you loosen those straps you have to unhook the fuel lines unplug the plug to the fuel pump and take the fill hose loose and then let the tank down to the ground,there is a O ring on the tank you have to take off to get the pump out and to put the new one in.usually takes 2 people to do it

Posted on Jan 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have olds intrigue '98. Always ran great.


If you are saying it starts and then dies, have you checked fuel pressure again ? Could be the fuel pump relay.

Jul 30, 2013 | Cars & Trucks

1 Answer

Car won't start


So then the next questions are - - do you have spark to the plugs and power and pulse ground to the injectors ?

Feb 01, 2013 | Cars & Trucks

1 Answer

I have a 2002 Mustang GT. I t has a 4.6 motor and Automatic ******. Car is mostly stock with aftermarket exhaust, gears and a cold air intake. The car has always been reliable and the other day I was...


I have had to change the inertia switch for poor connections. Ford has updated some of the switches and harness. Quick test is to unplug it and jump the connector to eliminate it. There is a fuel pump relay that acts up as well. Fuse 14 is the pump fuse in the engine comp, the relay is by the coolant bottle, there is also a fuel pump driver module on GT 4.6L located under the trunk. Or maybe the pump. When you want to diagnose it I can help you through chat or phone.

Good Luck

Aug 06, 2011 | 2002 Ford Mustang

1 Answer

My car was running fine. Started right up this


first does the motor crank over but doesn't start?can you hear the fuel pump run when the key is first turned on?you may have a bad fuel pump.check for dtc with a scanner. does the engine have spark when cranking?is there injector pulse during cranking?what is the fuel pressure?

Oct 23, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

1997 Daewoo Nubira no fuel to motor


check volts at pump with test light, replace pump

Sep 08, 2009 | 1985 Chevrolet Corvette

1 Answer

My Hyundai Santa Fe starts sometimes, If I continue to turn the key off and on it evenully starts. I have plenty of power, and the clicking is coming from on top of the motor under the shod under the hood,...


First of all, that 'ticking' noise you mention, if it's what I think it is, it's normal (purge control solenoid valve) being modulated by the ECM to **** the vapors back out of the charcoal canister. The 'Hard Starting' condition you describe could be almost anything from fuel (fuel pressure, fuel pump, injectors), timing, air leaks, vacuum leaks, crank position sensor, etc.). You'll want to connect a fuel pressure gauge to the fuel feed hose/tube at the engine fuel rail (where the injectors are) and monitor the pressure when this hard start condition occurs so you can at least eliminate it as the cause. If you find the pressure is low or 'intermittent' or 'fluctuates' abnormally, you'll want to inspect the wiring/connections between the fuel pump fuse and the fuel pump connector - repair/replace as needed. If the wiring/ connections are good and you have power & ground at the fuel pump, then the problem is probably the fuel pump.


40b9520.jpg8317463.jpg

Sep 06, 2009 | 2004 Hyundai Santa Fe

2 Answers

When I go to start my 96 Ford Taurus it will not start?


IF BATTERY IS 12.5 VOLTS THE CAR STILL DONT CRANK.MAKE SURE CABLES ARE TIGHT AND CLEAN NO CORROSION.IF ALL IS GOOD YOU HAVE STARTER SOLENOID PROBLEMS OR STARTER MOTOR IS DEFECTIVE.

Jul 05, 2009 | 1996 Ford Taurus

1 Answer

I have a 97 sebring that wont start. It has plenty of juice to turn it over but wont. would this be a fuel pump, maybe a fuel filter or like fuel injectors? im not sure if its even fuel injected though.


ALL American sold vehicles are fuel injected since around 1986. That having been said, have someone put their ear against the open fuel filler tube. Turn the key on 2 or 3 times(not over) just on. If they dont hear a hum for about 2 seconds you'lll probably need an in tank fuel pump. Sometimes it's the relay but rarely.

Jun 27, 2009 | 1997 Chrysler Sebring

2 Answers

Fuse location for 2004 suburban


If it has blown, then chances are the pumps shot. Same thing happened on my 01 Tahoe.

Fuse is in the box on the drive fender. I believe it was a 10, 15, maybe 20 (as I recall, it was yellow). I don't remember the marking, but it didn't say fuel pump. Maybe something like APRS1 and APRS2. Something like that.

Jan 22, 2009 | 2004 Chevrolet Suburban

2 Answers

2000 chevy blazer


ok fair enough..... do you know if it is getting a spark ?

Robert

Sep 26, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

63577 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...